OpenBSC

openbsc@lists.osmocom.org

4315 discussions

[PATCH 1/3] mgcp: Disable output enabled on initialisation
by Jacob Erlbeck 16 Jan '14

16 Jan '14

Currently RTP output_enabled is set to 1 on initialisation, which does not semantically match the initial value of conn_mode (MGCP_CONN_NONE). This patch changes this initial value to 0. Sponsored-by: On-Waves ehf --- openbsc/src/libmgcp/mgcp_protocol.c | 2 +- openbsc/tests/mgcp/mgcp_test.ok | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/openbsc/src/libmgcp/mgcp_protocol.c b/openbsc/src/libmgcp/mgcp_protocol.c index 9996ba7..9055bdb 100644 --- a/openbsc/src/libmgcp/mgcp_protocol.c +++ b/openbsc/src/libmgcp/mgcp_protocol.c @@ -1258,7 +1258,7 @@ static void mgcp_rtp_end_reset(struct mgcp_rtp_end *end) end->frames_per_packet = 0; /* unknown */ end->packet_duration_ms = DEFAULT_RTP_AUDIO_PACKET_DURATION_MS; end->rate = DEFAULT_RTP_AUDIO_DEFAULT_RATE; - end->output_enabled = 1; + end->output_enabled = 0; } static void mgcp_rtp_end_init(struct mgcp_rtp_end *end) diff --git a/openbsc/tests/mgcp/mgcp_test.ok b/openbsc/tests/mgcp/mgcp_test.ok index 7e8aa5c..3b645e6 100644 --- a/openbsc/tests/mgcp/mgcp_test.ok +++ b/openbsc/tests/mgcp/mgcp_test.ok @@ -51,7 +51,7 @@ Connection mode: 2, BTS output disabled, NET output enabled Testing DLCX Detected packet duration: 20 Requested packetization period not set -Connection mode: 0, BTS output enabled, NET output enabled +Connection mode: 0, BTS output disabled, NET output disabled Testing CRCX_ZYN Dummy packets: 1 Packet duration not set @@ -67,7 +67,7 @@ Testing RQNT2 Testing DLCX Detected packet duration: 20 Requested packetization period not set -Connection mode: 0, BTS output enabled, NET output enabled +Connection mode: 0, BTS output disabled, NET output disabled Testing CRCX Re-transmitting CRCX Testing RQNT1 -- 1.7.9.5

2 4

Feedback on l1sap-parts
by Holger Hans Peter Freyther 16 Jan '14

16 Jan '14

Dear Andreas, I noticed you rebased the code and I have further comments and requests for general changes. Magic Numbers: Please avoid magic numbers where you can. There is no runtime overhead by using a define and little pre-processing overhead. E.g. in here #define L1SAP_IS_LINK_SACCH(link_id) ((link_id & 0xC0) == 0x40) Make your methods smaller: Please compare this with the work Daniel and me to in cleaning up your code in the osmo-pcu. By splitting up the alloc_algorithm_b code we started to notice various defects just by looking at the code. Remove copy and paste: I think I saw the msgb in-place changing in at least two places. Avoid copy and paste (code cloning). Avoid putting logic in deeply nested constructs: if (a) if (b) if (c) important_stuff kind regards holger

2 1

[PATCH] Remove obsolete check of conn and lchan pointers not beeing NULL
by Andreas Eversberg 16 Jan '14

16 Jan '14

The check is removed from gsm48_cc_rx_setup() and gsm48_cc_rx_call_conf(). Receiving a layer 3 message implies that the transaction has a subscriber connection and a logical channel. This patch fixes the Coverity issues with CID 115311 and CID 1155312. --- openbsc/src/libmsc/gsm_04_08.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) diff --git a/openbsc/src/libmsc/gsm_04_08.c b/openbsc/src/libmsc/gsm_04_08.c index 54f5f70..0c6b100 100644 --- a/openbsc/src/libmsc/gsm_04_08.c +++ b/openbsc/src/libmsc/gsm_04_08.c @@ -1803,8 +1803,7 @@ static int gsm48_cc_rx_setup(struct gsm_trans *trans, struct msgb *msg) memset(&setup, 0, sizeof(struct gsm_mncc)); setup.callref = trans->callref; - if (trans->conn && trans->conn->lchan) - setup.lchan_type = trans->conn->lchan->type; + setup.lchan_type = trans->conn->lchan->type; tlv_parse(&tp, &gsm48_att_tlvdef, gh->data, payload_len, 0, 0); /* emergency setup is identified by msg_type */ if (msg_type == GSM48_MT_CC_EMERG_SETUP) @@ -1961,8 +1960,7 @@ static int gsm48_cc_rx_call_conf(struct gsm_trans *trans, struct msgb *msg) memset(&call_conf, 0, sizeof(struct gsm_mncc)); call_conf.callref = trans->callref; - if (trans->conn && trans->conn->lchan) - call_conf.lchan_type = trans->conn->lchan->type; + call_conf.lchan_type = trans->conn->lchan->type; tlv_parse(&tp, &gsm48_att_tlvdef, gh->data, payload_len, 0, 0); #if 0 /* repeat */ -- 1.7.3.4

1 0

[PATCH 1/4] Each BTS can be configured for speech support (other than GSM full rate)
by Andreas Eversberg 15 Jan '14

15 Jan '14

Speech codings which are not supported by BTS will be removed from the bearer capability information element after parsing. This way it is not required for the MNCC application to consider support of each BTS. Only GSM full rate is supported by default. --- openbsc/include/openbsc/gsm_data_shared.h | 9 ++++ openbsc/src/libbsc/bsc_vty.c | 72 +++++++++++++++++++++++++++++ openbsc/src/libmsc/gsm_04_08.c | 28 +++++++++++ 3 files changed, 109 insertions(+), 0 deletions(-) diff --git a/openbsc/include/openbsc/gsm_data_shared.h b/openbsc/include/openbsc/gsm_data_shared.h index 84d15ef..4a41498 100644 --- a/openbsc/include/openbsc/gsm_data_shared.h +++ b/openbsc/include/openbsc/gsm_data_shared.h @@ -143,6 +143,12 @@ struct bts_ul_meas { uint8_t inv_rssi; }; +struct bts_codec_conf { + uint8_t hr; + uint8_t efr; + uint8_t amr; +}; + struct amr_mode { uint8_t mode; uint8_t threshold; @@ -704,6 +710,9 @@ struct gsm_bts { /* exclude the BTS from the global RF Lock handling */ int excl_from_rf_lock; + + /* supported codecs beside FR */ + struct bts_codec_conf codec; #endif /* ROLE_BSC */ void *role; }; diff --git a/openbsc/src/libbsc/bsc_vty.c b/openbsc/src/libbsc/bsc_vty.c index b034981..f444427 100644 --- a/openbsc/src/libbsc/bsc_vty.c +++ b/openbsc/src/libbsc/bsc_vty.c @@ -629,6 +629,15 @@ static void config_write_bts_single(struct vty *vty, struct gsm_bts *bts) } } + vty_out(vty, " codec-support fr"); + if (bts->codec.hr) + vty_out(vty, " hr"); + if (bts->codec.efr) + vty_out(vty, " efr"); + if (bts->codec.amr) + vty_out(vty, " amr"); + vty_out(vty, "%s", VTY_NEWLINE); + config_write_bts_gprs(vty, bts); if (bts->excl_from_rf_lock) @@ -2635,6 +2644,65 @@ DEFUN(cfg_bts_no_excl_rf_lock, return CMD_SUCCESS; } +static void _get_codec_from_arg(struct vty *vty, int argc, const char *argv[]) +{ + struct gsm_bts *bts = vty->index; + struct bts_codec_conf *codec = &bts->codec; + int i; + + codec->hr = 0; + codec->efr = 0; + codec->amr = 0; + for (i = 0; i < argc; i++) { + if (!strcmp(argv[i], "hr")) + codec->hr = 1; + if (!strcmp(argv[i], "efr")) + codec->efr = 1; + if (!strcmp(argv[i], "amr")) + codec->amr = 1; + } +} + +#define CODEC_PAR_STR " (fr|hr|efr|amr)" +#define CODEC_HELP_STR "Full Rate (mandatory)\nHalf Rate\n" \ + "Enhanced Full Rate\nAdaptive Multirate\n" + +DEFUN(cfg_bts_codec1, cfg_bts_codec1_cmd, + "codec-support" CODEC_PAR_STR, + "Codec Support settings\n" + CODEC_HELP_STR) +{ + _get_codec_from_arg(vty, 1, argv); + return CMD_SUCCESS; +} + +DEFUN(cfg_bts_codec2, cfg_bts_codec2_cmd, + "codec-support" CODEC_PAR_STR CODEC_PAR_STR, + "Codec Support settings\n" + CODEC_HELP_STR CODEC_HELP_STR) +{ + _get_codec_from_arg(vty, 2, argv); + return CMD_SUCCESS; +} + +DEFUN(cfg_bts_codec3, cfg_bts_codec3_cmd, + "codec-support" CODEC_PAR_STR CODEC_PAR_STR CODEC_PAR_STR, + "Codec Support settings\n" + CODEC_HELP_STR CODEC_HELP_STR CODEC_HELP_STR) +{ + _get_codec_from_arg(vty, 3, argv); + return CMD_SUCCESS; +} + +DEFUN(cfg_bts_codec4, cfg_bts_codec4_cmd, + "codec-support" CODEC_PAR_STR CODEC_PAR_STR CODEC_PAR_STR CODEC_PAR_STR, + "Codec Support settings\n" + CODEC_HELP_STR CODEC_HELP_STR CODEC_HELP_STR CODEC_HELP_STR) +{ + _get_codec_from_arg(vty, 4, argv); + return CMD_SUCCESS; +} + #define TRX_TEXT "Radio Transceiver\n" /* per TRX configuration */ @@ -3231,6 +3299,10 @@ int bsc_vty_init(const struct log_info *cat) install_element(BTS_NODE, &cfg_bts_si5_neigh_cmd); install_element(BTS_NODE, &cfg_bts_excl_rf_lock_cmd); install_element(BTS_NODE, &cfg_bts_no_excl_rf_lock_cmd); + install_element(BTS_NODE, &cfg_bts_codec1_cmd); + install_element(BTS_NODE, &cfg_bts_codec2_cmd); + install_element(BTS_NODE, &cfg_bts_codec3_cmd); + install_element(BTS_NODE, &cfg_bts_codec4_cmd); install_element(BTS_NODE, &cfg_trx_cmd); install_node(&trx_node, dummy_config_write); diff --git a/openbsc/src/libmsc/gsm_04_08.c b/openbsc/src/libmsc/gsm_04_08.c index 3cfc455..dec97f2 100644 --- a/openbsc/src/libmsc/gsm_04_08.c +++ b/openbsc/src/libmsc/gsm_04_08.c @@ -79,6 +79,29 @@ struct gsm_lai { uint16_t lac; }; +static int apply_codec_restrictions(struct gsm_bts *bts, + struct gsm_mncc_bearer_cap *bcap) +{ + int i, j; + + /* remove unsupported speech versions from list */ + for (i = 0, j = 0; bcap->speech_ver[i] >= 0; i++) { + if (bcap->speech_ver[i] == GSM48_BCAP_SV_FR) + bcap->speech_ver[j++] = GSM48_BCAP_SV_FR; + if (bcap->speech_ver[i] == GSM48_BCAP_SV_EFR && bts->codec.efr) + bcap->speech_ver[j++] = GSM48_BCAP_SV_EFR; + if (bcap->speech_ver[i] == GSM48_BCAP_SV_AMR_F && bts->codec.amr) + bcap->speech_ver[j++] = GSM48_BCAP_SV_AMR_F; + if (bcap->speech_ver[i] == GSM48_BCAP_SV_HR && bts->codec.hr) + bcap->speech_ver[j++] = GSM48_BCAP_SV_HR; + if (bcap->speech_ver[i] == GSM48_BCAP_SV_AMR_H && bts->codec.amr) + bcap->speech_ver[j++] = GSM48_BCAP_SV_AMR_H; + } + bcap->speech_ver[j] = -1; + + return 0; +} + static uint32_t new_callref = 0x80000001; void cc_tx_to_mncc(struct gsm_network *net, struct msgb *msg) @@ -1763,6 +1786,7 @@ static int gsm48_cc_rx_setup(struct gsm_trans *trans, struct msgb *msg) setup.fields |= MNCC_F_BEARER_CAP; gsm48_decode_bearer_cap(&setup.bearer_cap, TLVP_VAL(&tp, GSM48_IE_BEARER_CAP)-1); + apply_codec_restrictions(trans->conn->bts, &setup.bearer_cap); } /* facility */ if (TLVP_PRESENT(&tp, GSM48_IE_FACILITY)) { @@ -1916,6 +1940,7 @@ static int gsm48_cc_rx_call_conf(struct gsm_trans *trans, struct msgb *msg) call_conf.fields |= MNCC_F_BEARER_CAP; gsm48_decode_bearer_cap(&call_conf.bearer_cap, TLVP_VAL(&tp, GSM48_IE_BEARER_CAP)-1); + apply_codec_restrictions(trans->conn->bts, &call_conf.bearer_cap); } /* cause */ if (TLVP_PRESENT(&tp, GSM48_IE_CAUSE)) { @@ -2604,6 +2629,7 @@ static int gsm48_cc_rx_modify(struct gsm_trans *trans, struct msgb *msg) modify.fields |= MNCC_F_BEARER_CAP; gsm48_decode_bearer_cap(&modify.bearer_cap, TLVP_VAL(&tp, GSM48_IE_BEARER_CAP)-1); + apply_codec_restrictions(trans->conn->bts, &modify.bearer_cap); } new_cc_state(trans, GSM_CSTATE_MO_ORIG_MODIFY); @@ -2646,6 +2672,7 @@ static int gsm48_cc_rx_modify_complete(struct gsm_trans *trans, struct msgb *msg modify.fields |= MNCC_F_BEARER_CAP; gsm48_decode_bearer_cap(&modify.bearer_cap, TLVP_VAL(&tp, GSM48_IE_BEARER_CAP)-1); + apply_codec_restrictions(trans->conn->bts, &modify.bearer_cap); } new_cc_state(trans, GSM_CSTATE_ACTIVE); @@ -2686,6 +2713,7 @@ static int gsm48_cc_rx_modify_reject(struct gsm_trans *trans, struct msgb *msg) modify.fields |= GSM48_IE_BEARER_CAP; gsm48_decode_bearer_cap(&modify.bearer_cap, TLVP_VAL(&tp, GSM48_IE_BEARER_CAP)-1); + apply_codec_restrictions(trans->conn->bts, &modify.bearer_cap); } /* cause */ if (TLVP_PRESENT(&tp, GSM48_IE_CAUSE)) { -- 1.7.3.4

4 14

[PATCH 1/9] si: Add a hack to disable SI2ter/SI2bis/SI5ter/SI5bis messages
by Jacob Erlbeck 15 Jan '14

15 Jan '14

From: Holger Hans Peter Freyther <zecke(a)selfish.org> The iPhone5 (US) appears to have some issues with the SIs generated, or the nanoBTS is not sending them correctly. Add a hack to put all bands into the SI2/SI5 message. This is a quick change without much reflection and watching for side effects. I have verfied that a network with ARFCN 134 and neighbors ARFCN 130 and 512 do not get generate the SI2ter and announce everything inside the SI2. --- openbsc/src/libbsc/system_information.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/openbsc/src/libbsc/system_information.c b/openbsc/src/libbsc/system_information.c index c901a4a..cb67011 100644 --- a/openbsc/src/libbsc/system_information.c +++ b/openbsc/src/libbsc/system_information.c @@ -44,6 +44,7 @@ * array. DCS1800 and PCS1900 can not be used at the same time so conserve * memory and do the below. */ +#if 0 static int band_compatible(const struct gsm_bts *bts, int arfcn) { enum gsm_band band = gsm_arfcn2band(arfcn); @@ -57,6 +58,7 @@ static int band_compatible(const struct gsm_bts *bts, int arfcn) return 0; } +#endif static int is_dcs_net(const struct gsm_bts *bts) { @@ -70,6 +72,11 @@ static int is_dcs_net(const struct gsm_bts *bts) static int use_arfcn(const struct gsm_bts *bts, const int bis, const int ter, const int pgsm, const int arfcn) { + if (bis || ter) + return 0; + return 1; +#if 0 + Correct but somehow broken with either the nanoBTS or the iPhone5 if (!bis && !ter && band_compatible(bts, arfcn)) return 1; if (bis && pgsm && band_compatible(bts, arfcn) && (arfcn < 1 || arfcn > 124)) @@ -77,6 +84,7 @@ static int use_arfcn(const struct gsm_bts *bts, const int bis, const int ter, if (ter && !band_compatible(bts, arfcn)) return 1; return 0; +#endif } /* Frequency Lists as per TS 04.08 10.5.2.13 */ -- 1.7.9.5

2 20

[PATCH 1/9] mgcp/rtp: Refactor mgcp_send to avoid code duplication
by Jacob Erlbeck 15 Jan '14

15 Jan '14

Currently there are two symmetric code paths which are selected by the packet destination (NET or BTS). This patch introduces 3 variables that take the different values and unifies both code paths into one. Sponsored-by: On-Waves ehf --- openbsc/src/libmgcp/mgcp_network.c | 50 ++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 28 deletions(-) diff --git a/openbsc/src/libmgcp/mgcp_network.c b/openbsc/src/libmgcp/mgcp_network.c index 657019e..1c7c3da 100644 --- a/openbsc/src/libmgcp/mgcp_network.c +++ b/openbsc/src/libmgcp/mgcp_network.c @@ -537,6 +537,10 @@ static int mgcp_send(struct mgcp_endpoint *endp, int dest, int is_rtp, struct sockaddr_in *addr, char *buf, int rc) { struct mgcp_trunk_config *tcfg = endp->tcfg; + struct mgcp_rtp_end *rtp_end; + struct mgcp_rtp_state *rtp_state; + int tap_idx; + /* For loop toggle the destination and then dispatch. */ if (tcfg->audio_loop) dest = !dest; @@ -546,35 +550,25 @@ static int mgcp_send(struct mgcp_endpoint *endp, int dest, int is_rtp, dest = !dest; if (dest == MGCP_DEST_NET) { - if (is_rtp) { - mgcp_patch_and_count(endp, &endp->bts_state, - &endp->net_end, - addr, buf, rc); - forward_data(endp->net_end.rtp.fd, - &endp->taps[MGCP_TAP_NET_OUT], buf, rc); - return mgcp_udp_send(endp->net_end.rtp.fd, - &endp->net_end.addr, - endp->net_end.rtp_port, buf, rc); - } else if (!tcfg->omit_rtcp) { - return mgcp_udp_send(endp->net_end.rtcp.fd, - &endp->net_end.addr, - endp->net_end.rtcp_port, buf, rc); - } + rtp_end = &endp->net_end; + rtp_state = &endp->bts_state; + tap_idx = MGCP_TAP_NET_OUT; } else { - if (is_rtp) { - mgcp_patch_and_count(endp, &endp->net_state, - &endp->bts_end, - addr, buf, rc); - forward_data(endp->bts_end.rtp.fd, - &endp->taps[MGCP_TAP_BTS_OUT], buf, rc); - return mgcp_udp_send(endp->bts_end.rtp.fd, - &endp->bts_end.addr, - endp->bts_end.rtp_port, buf, rc); - } else if (!tcfg->omit_rtcp) { - return mgcp_udp_send(endp->bts_end.rtcp.fd, - &endp->bts_end.addr, - endp->bts_end.rtcp_port, buf, rc); - } + rtp_end = &endp->bts_end; + rtp_state = &endp->net_state; + tap_idx = MGCP_TAP_BTS_OUT; + } + + if (is_rtp) { + mgcp_patch_and_count(endp, rtp_state, rtp_end, addr, buf, rc); + forward_data(rtp_end->rtp.fd, &endp->taps[tap_idx], buf, rc); + return mgcp_udp_send(rtp_end->rtp.fd, + &rtp_end->addr, + rtp_end->rtp_port, buf, rc); + } else if (!tcfg->omit_rtcp) { + return mgcp_udp_send(rtp_end->rtcp.fd, + &rtp_end->addr, + rtp_end->rtcp_port, buf, rc); } return 0; -- 1.7.9.5

2 19

[RFC] [ADMIN] Making lists subscriber-only?
by Harald Welte 15 Jan '14

15 Jan '14

Dear all, so far the osmocom.org mailing lists have always been in a 'non-members are manually moderated' mode. This has created a lot of work for manual list moderation, where a lot of the messages caught are simply spam, and only the occasional valid message is being received. I'd like to thank the list moderators for taking care of this. However, in more recent discussions, we were considering to move the lists to a completely closed mode, i.e. postings would automatically be rejected from non-members. The automatic response would contain a description of how to subscribe in 'nomail' mode, i.e. to subscribe in a way to be able to post to the list, while still not receiving any incoming traffic. The latter should be fine for occasional posters who don't want the bulk e-mail that goes with a full/regular subscription. Please provide feedback in case you disagree with that change. Unless there is major opposition, we will likely transition to the 'closed' mode within one month. Thanks, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

7 7

[PATCH] Support of multiple RSL connections for ABIS/ipaccess (BTS side)
by Andreas Eversberg 14 Jan '14

14 Jan '14

In order to support multiple TRX, multiple RSL connections can be establised. e1inp_ipa_bts_rsl_connect() requires an additional parameter to set the TRX number. The code was tested with osmobts-trx. The user of e1inp_ipa_bts_rsl_connect() (which is osmo-bts) must be upgraded after applying the patch. src/common/oml.c - rc = e1inp_ipa_bts_rsl_connect(oml_link->ts->line, inet_ntoa(in), port); + rc = e1inp_ipa_bts_rsl_connect(oml_link->ts->line, inet_ntoa(in), port, 0); --- include/osmocom/abis/e1_input.h | 3 ++- src/input/ipaccess.c | 18 +++++++++++------- tests/e1inp_ipa_bts_test.c | 2 +- 3 files changed, 14 insertions(+), 9 deletions(-) diff --git a/include/osmocom/abis/e1_input.h b/include/osmocom/abis/e1_input.h index 0abf0b8..2a9890c 100644 --- a/include/osmocom/abis/e1_input.h +++ b/include/osmocom/abis/e1_input.h @@ -258,7 +258,8 @@ struct subch_mux *e1inp_get_mux(uint8_t e1_nr, uint8_t ts_nr); /* on an IPA BTS, the BTS needs to establish the RSL connection much * later than the OML connection. */ int e1inp_ipa_bts_rsl_connect(struct e1inp_line *line, - const char *rem_addr, uint16_t rem_port); + const char *rem_addr, uint16_t rem_port, + uint8_t trx_id); void e1inp_sign_link_destroy(struct e1inp_sign_link *link); int e1inp_line_update(struct e1inp_line *line); diff --git a/src/input/ipaccess.c b/src/input/ipaccess.c index 9722b2f..20894e4 100644 --- a/src/input/ipaccess.c +++ b/src/input/ipaccess.c @@ -717,7 +717,7 @@ err_line: #define IPA_STRING_MAX 64 static struct msgb * -ipa_bts_id_resp(struct ipaccess_unit *dev, uint8_t *data, int len) +ipa_bts_id_resp(struct ipaccess_unit *dev, uint8_t *data, int len, int trx_nr) { struct msgb *nmsg; char str[IPA_STRING_MAX]; @@ -738,7 +738,7 @@ ipa_bts_id_resp(struct ipaccess_unit *dev, uint8_t *data, int len) switch (data[1]) { case IPAC_IDTAG_UNIT: snprintf(str, sizeof(str), "%u/%u/%u", - dev->site_id, dev->bts_id, dev->trx_id); + dev->site_id, dev->bts_id, trx_nr); break; case IPAC_IDTAG_MACADDR: snprintf(str, sizeof(str), @@ -838,6 +838,7 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) struct e1inp_sign_link *sign_link; uint8_t *data = msgb_l2(msg); int len = msgb_l2len(msg); + int trx_nr = 0; LOGP(DLINP, LOGL_NOTICE, "received ID get\n"); if (!link->line->ops->sign_link_up) { @@ -847,8 +848,10 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) ret = -EINVAL; goto err; } + if (link->ofd->priv_nr >= E1INP_SIGN_RSL) + trx_nr = link->ofd->priv_nr - E1INP_SIGN_RSL; rmsg = ipa_bts_id_resp(link->line->ops->cfg.ipa.dev, - data + 1, len - 1); + data + 1, len - 1, trx_nr); ret = ipaccess_send(link->ofd->fd, rmsg->data, rmsg->len); if (ret != rmsg->len) { @@ -885,7 +888,7 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) } else if (link->port == IPA_TCP_PORT_OML) e1i_ts = &link->line->ts[0]; else if (link->port == IPA_TCP_PORT_RSL) - e1i_ts = &link->line->ts[1]; + e1i_ts = &link->line->ts[link->ofd->priv_nr-1]; OSMO_ASSERT(e1i_ts != NULL); @@ -1016,13 +1019,14 @@ static int ipaccess_line_update(struct e1inp_line *line) } int e1inp_ipa_bts_rsl_connect(struct e1inp_line *line, - const char *rem_addr, uint16_t rem_port) + const char *rem_addr, uint16_t rem_port, + uint8_t trx_id) { struct ipa_client_conn *rsl_link; rsl_link = ipa_client_conn_create(tall_ipa_ctx, - &line->ts[E1INP_SIGN_RSL-1], - E1INP_SIGN_RSL, + &line->ts[E1INP_SIGN_RSL+trx_id-1], + E1INP_SIGN_RSL+trx_id, rem_addr, rem_port, ipaccess_bts_updown_cb, ipaccess_bts_read_cb, diff --git a/tests/e1inp_ipa_bts_test.c b/tests/e1inp_ipa_bts_test.c index 02a4cb3..a43dba3 100644 --- a/tests/e1inp_ipa_bts_test.c +++ b/tests/e1inp_ipa_bts_test.c @@ -70,7 +70,7 @@ sign_link_up(void *unit, struct e1inp_line *line, enum e1inp_sign_type type) /* Now we can send OML messages to the BSC. */ bts_state = BTS_TEST_OML_SIGN_LINK_UP; } - e1inp_ipa_bts_rsl_connect(line, "127.0.0.1", IPA_TCP_PORT_RSL); + e1inp_ipa_bts_rsl_connect(line, "127.0.0.1", IPA_TCP_PORT_RSL, 0); break; case E1INP_SIGN_RSL: LOGP(DBTSTEST, LOGL_NOTICE, "RSL link up request received.\n"); -- 1.8.1.5 --------------080608010203010806040100--

1 0

[PATCH] Support for multiple RSL connections with ABIS/ipaccess (BTS side)
by Andreas Eversberg 14 Jan '14

14 Jan '14

In order to support multiple TRX, multiple RSL connections can be establised. e1inp_ipa_bts_rsl_connect() requires an additional parameter to set the TRX number. The code was successfully tested with osmobts-trx and UmTRX with two transceivers. The user of e1inp_ipa_bts_rsl_connect() and e1inp_line_bind_ops() (which is osmo-bts) must be upgraded after applying the patch. --- include/osmocom/abis/e1_input.h | 3 ++- src/input/ipaccess.c | 16 ++++++++++------ tests/e1inp_ipa_bts_test.c | 2 +- 3 files changed, 13 insertions(+), 8 deletions(-) diff --git a/include/osmocom/abis/e1_input.h b/include/osmocom/abis/e1_input.h index 0abf0b8..2a9890c 100644 --- a/include/osmocom/abis/e1_input.h +++ b/include/osmocom/abis/e1_input.h @@ -258,7 +258,8 @@ struct subch_mux *e1inp_get_mux(uint8_t e1_nr, uint8_t ts_nr); /* on an IPA BTS, the BTS needs to establish the RSL connection much * later than the OML connection. */ int e1inp_ipa_bts_rsl_connect(struct e1inp_line *line, - const char *rem_addr, uint16_t rem_port); + const char *rem_addr, uint16_t rem_port, + uint8_t trx_id); void e1inp_sign_link_destroy(struct e1inp_sign_link *link); int e1inp_line_update(struct e1inp_line *line); diff --git a/src/input/ipaccess.c b/src/input/ipaccess.c index 9722b2f..86ddd3a 100644 --- a/src/input/ipaccess.c +++ b/src/input/ipaccess.c @@ -838,6 +838,7 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) struct e1inp_sign_link *sign_link; uint8_t *data = msgb_l2(msg); int len = msgb_l2len(msg); + struct ipaccess_unit *unit_data; LOGP(DLINP, LOGL_NOTICE, "received ID get\n"); if (!link->line->ops->sign_link_up) { @@ -847,7 +848,9 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) ret = -EINVAL; goto err; } - rmsg = ipa_bts_id_resp(link->line->ops->cfg.ipa.dev, + unit_data = (struct ipaccess_unit *) + link->line->ops->cfg.ipa.dev; + rmsg = ipa_bts_id_resp(&unit_data[link->ofd->priv_nr-1], data + 1, len - 1); ret = ipaccess_send(link->ofd->fd, rmsg->data, rmsg->len); @@ -869,7 +872,7 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) } msgb_free(rmsg); - sign_link = link->line->ops->sign_link_up(msg, + sign_link = link->line->ops->sign_link_up(unit_data, link->line, link->ofd->priv_nr); if (sign_link == NULL) { @@ -885,7 +888,7 @@ static int ipaccess_bts_read_cb(struct ipa_client_conn *link, struct msgb *msg) } else if (link->port == IPA_TCP_PORT_OML) e1i_ts = &link->line->ts[0]; else if (link->port == IPA_TCP_PORT_RSL) - e1i_ts = &link->line->ts[1]; + e1i_ts = &link->line->ts[link->ofd->priv_nr-1]; OSMO_ASSERT(e1i_ts != NULL); @@ -1016,13 +1019,14 @@ static int ipaccess_line_update(struct e1inp_line *line) } int e1inp_ipa_bts_rsl_connect(struct e1inp_line *line, - const char *rem_addr, uint16_t rem_port) + const char *rem_addr, uint16_t rem_port, + uint8_t trx_id) { struct ipa_client_conn *rsl_link; rsl_link = ipa_client_conn_create(tall_ipa_ctx, - &line->ts[E1INP_SIGN_RSL-1], - E1INP_SIGN_RSL, + &line->ts[E1INP_SIGN_RSL+trx_id-1], + E1INP_SIGN_RSL+trx_id, rem_addr, rem_port, ipaccess_bts_updown_cb, ipaccess_bts_read_cb, diff --git a/tests/e1inp_ipa_bts_test.c b/tests/e1inp_ipa_bts_test.c index 02a4cb3..a43dba3 100644 --- a/tests/e1inp_ipa_bts_test.c +++ b/tests/e1inp_ipa_bts_test.c @@ -70,7 +70,7 @@ sign_link_up(void *unit, struct e1inp_line *line, enum e1inp_sign_type type) /* Now we can send OML messages to the BSC. */ bts_state = BTS_TEST_OML_SIGN_LINK_UP; } - e1inp_ipa_bts_rsl_connect(line, "127.0.0.1", IPA_TCP_PORT_RSL); + e1inp_ipa_bts_rsl_connect(line, "127.0.0.1", IPA_TCP_PORT_RSL, 0); break; case E1INP_SIGN_RSL: LOGP(DBTSTEST, LOGL_NOTICE, "RSL link up request received.\n"); -- 1.8.1.5 --------------030007020209040104000503 Content-Type: text/x-diff; name="osmo-bts_Support-for-multiple-RSL-connections.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="osmo-bts_Support-for-multiple-RSL-connections.patch"

1 0

[PATCH] libabis: Enable TCP keepalive by default on all BTS connections
by Jacob Erlbeck 14 Jan '14

14 Jan '14

From: Daniel Willmann <daniel(a)totalueberwachung.de> This way we can find out fast if the connection is broken. Ticket: OW#1060 --- src/input/ipaccess.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/src/input/ipaccess.c b/src/input/ipaccess.c index 4a56569..371b21c 100644 --- a/src/input/ipaccess.c +++ b/src/input/ipaccess.c @@ -28,6 +28,7 @@ #include <stdlib.h> #include <stdbool.h> #include <errno.h> +#include <netinet/tcp.h> #include <string.h> #include <time.h> #include <sys/fcntl.h> @@ -50,6 +51,10 @@ static void *tall_ipa_ctx; #define TS1_ALLOC_SIZE 900 +#define DEFAULT_TCP_KEEPALIVE_IDLE_TIMEOUT 30 +#define DEFAULT_TCP_KEEPALIVE_INTERVAL 3 +#define DEFAULT_TCP_KEEPALIVE_RETRY_COUNT 10 + /* * Common propietary IPA messages: * - PONG: in reply to PING. @@ -605,7 +610,7 @@ static int ipaccess_bsc_oml_cb(struct ipa_server_link *link, int fd) { int ret; int idx = 0; - int i; + int i, val; struct e1inp_line *line; struct e1inp_ts *e1i_ts; struct osmo_fd *bfd; @@ -638,6 +643,34 @@ static int ipaccess_bsc_oml_cb(struct ipa_server_link *link, int fd) goto err_line; } + /* Enable TCP keepalive to find out if the connection is gone */ + val = 1; + ret = setsockopt(bfd->fd, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)); + if (ret < 0) + LOGP(DLINP, LOGL_NOTICE, "Failed to set keepalive: %s\n", + strerror(errno)); + else + LOGP(DLINP, LOGL_NOTICE, "Keepalive is set: %i\n", ret); + +#if defined(TCP_KEEPIDLE) && defined(TCP_KEEPINTVL) && defined(TCP_KEEPCNT) + /* The following options are not portable! */ + val = DEFAULT_TCP_KEEPALIVE_IDLE_TIMEOUT; + ret = setsockopt(bfd->fd, IPPROTO_TCP, TCP_KEEPIDLE, &val, sizeof(val)); + if (ret < 0) + LOGP(DLINP, LOGL_NOTICE, "Failed to set keepalive idle time: %s\n", + strerror(errno)); + val = DEFAULT_TCP_KEEPALIVE_INTERVAL; + ret = setsockopt(bfd->fd, IPPROTO_TCP, TCP_KEEPINTVL, &val, sizeof(val)); + if (ret < 0) + LOGP(DLINP, LOGL_NOTICE, "Failed to set keepalive interval: %s\n", + strerror(errno)); + val = DEFAULT_TCP_KEEPALIVE_RETRY_COUNT; + ret = setsockopt(bfd->fd, IPPROTO_TCP, TCP_KEEPCNT, &val, sizeof(val)); + if (ret < 0) + LOGP(DLINP, LOGL_NOTICE, "Failed to set keepalive count: %s\n", + strerror(errno)); +#endif + /* Request ID. FIXME: request LOCATION, HW/SW VErsion, Unit Name, Serno */ ret = ipaccess_send_id_req(bfd->fd); if (ret < 0) { -- 1.7.9.5

3 15

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC