> I don't understand. This callback will be called with data you need to
write
> to the network. In case of MTP Level3 you will need to wrap that around
the
> msgb you got.
I means: is the interaction with mtp3 layer implemented (is sending sccp
data by mtp3 implemented by the library?)?
Also, what about the reception of data from mtp3 layer. is that implemented
in the sccp lib.
I am asking these questions because I see the code of mtp3 in the lib but no
significant call is present in the sccp part of the lib.
Thank you for your help.
Hi all,
Just wanted to share an issue and a quick workaround I found for it in case
anyone else has the same problem. I believe a cmd2 update is causing
pySim-shell to fail. After installing it on a fresh install of Ubuntu
Server 20.04 and getting the following error when I run "python3
pySim-shell -p0":
>Using PC/SC reader interface
>Autodetected card type: sysmoUSIM-SJS1
>AIDs on card:
> USIM: a0000000871002ffffffff8907090000
>Traceback (most recent call last):
> File "pySim-shell.py", line 512, in <module>
> app = PysimApp(card, rs, opts.script)
> File "pySim-shell.py", line 59, in __init__
> super().__init__(persistent_history_file='~/.pysim_shell_history',
allow_cli_args=False, use_ipython=True, auto_load_commands=False,
command_sets=basic_commands, >startup_script=script)
>TypeError: __init__() got an unexpected keyword argument 'use_ipython'
If you run into this you can fix it by uninstalling cmd2 and reinstalling
cmd2 with "pip3 install cmd2==1.5".
Best,
Bryan
On Tue, Jun 28, 2016 at 10:05:28AM +0200, Harald Welte wrote:
> [translated from german]
> is it certain that we switch a channel to PDCH only when
> gprs mode != none?
A TS can be GSM_PCHAN_TCH_F_PDCH; those are the only ones for which we
send a PDCH ACT message.
We send a PDCH ACT message
- during init (CHANNEL OML's state changed to enabled -> send PDCH ACT),
- and upon channel release ack when pchan == GSM_PCHAN_TCH_F_PDCH.
So the question is, when we receive a channel release ack, could that be
the PDCH release and we switch PDCH right back on by accident? No, because
we only receive a chan rel ack when the *TCH/F* is being released.
That is because the PDCH release is initiated "internally" from the PDCH
DEACT, and thus this condition in common/rsl.c rsl_tx_rf_rel_ack() catches
on, which existed before dyn PDCH:
if (lchan->rel_act_kind != LCHAN_REL_ACT_RSL) {
LOGP(DRSL, LOGL_NOTICE, "%s not sending REL ACK\n",
gsm_lchan_name(lchan));
return 0;
}
In rsl_rx_rf_chan_rel() the rel_act_kind is set to LCHAN_REL_ACT_RSL, but
not in the rsl_rx_dyn_pdch().
This is analogous to the ip.access way -- the ip.access nanobts replies to
a PDCH DEACT with a PDCH DEACT ACK and doesn't send a separate channel
release ack.
Maybe we could set rel_act_kind to some new LCHAN_REL_ACT_IPAC_DYN_PDCH
for clarity? (But we shouldn't actually send a release ack, to stay
compatible.)
Even though it works as-is, we should indeed add another flag check:
- We do check the flags that no ACT/DEACT is already pending;
- And we do send a PDCH DEACT only if ts->flags & TS_F_PDCH_ACTIVE;
- But we would send a PDCH ACT despite ts->flags & TS_F_PDCH_ACTIVE.
This should never happen, but it would make sense to ensure that.
~Neels
Hi!
I am in possession of a pair of Siemens BS11 mounting plates and am
looking for a second pair. A photo of the plates is attached.
Since - I believe - most people who play with such basestations do not
mount them to a wall or pole, my hope is that some unused ones are
floating around somewhere.
Thanks,
-Alex^Wblackbit
Hello.
I have tested CSFB on several phones in different situations. Calls from 4G
to 2G are always established, but calls from 2G to 4G and from 4G to 4G are
not always successful (sometimes they connect, and sometimes they do not).
For this test, the phone's location relative to my USRP antennas is fixed.
It is noteworthy that I have set the 4G neighbor in Osmo-BSC, as well as
the 2G ARFCN information in SIB7. I attched log file and pcap of osmo
system.
osmo system ip:192.168.75.192
srsran_4G ip:192.168.75.185
open5gs ip:192.168.75.181
I would be very grateful if anyone with experience in this field could help
me.
