OpenBSC

openbsc@lists.osmocom.org

4315 discussions

1 OpenBSC moderator request(s) waiting
by openbsc-bounces＠lists.osmocom.org 14 Jan '14

14 Jan '14

The OpenBSC(a)lists.osmocom.org mailing list has 1 request(s) waiting for your consideration at: https://lists.osmocom.org/mailman/admindb/openbsc Please attend to this at your earliest convenience. This notice of pending requests, if any, will be sent out daily. Pending posts: From: edoardo.rispoli(a)gmail.com on Mon Jan 13 23:46:56 2014 Subject: Re: [RFC] [ADMIN] Making lists subscriber-only? Cause: Post by non-member to a members-only list

1 0

OsmoBTS on RAD1
by Kurtis Heimerl 13 Jan '14

13 Jan '14

Hey OpenBSC, Tom, I've been working on getting OsmoBTS running on the recently open-sourced Range Networks RAD1 radio. The code is available here: https://github.com/kheimerl/vbts-openbts/tree/osmotrx. I am stuck now and I was hoping the mailing list might be able to provide some perspective. With the RAD1, the system is beaconing correctly. However, phones are unable to camp. I logged a phone trying to camp on both the RAD1 and a B100 to compare the output and see if anything jumps out. The osmoBTS/osmo-nitb logs are seemingly identical, but the transceiver outputs are different. Both of the transceiver outputs are attached. The only big difference I see is in the "underflows" on the RAD1, which in my experience is a deal-breaker; that's not usually an easy fix. Does anyone have a different perspective on what might be going on in here? Thanks!

2 3

[PATCH] gsm/gsm48ie: Fix range 256 W[i] decoding
by Jacob Erlbeck 13 Jan '14

13 Jan '14

Currently w[14]/w[15] and w[18]/w[19] are swapped in range 256 format decoding in gsm48_decode_freq_list(). This patch fixes this. Sponsored-by: On-Waves ehf --- src/gsm/gsm48_ie.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/gsm/gsm48_ie.c b/src/gsm/gsm48_ie.c index 78619b9..2cc0645 100644 --- a/src/gsm/gsm48_ie.c +++ b/src/gsm/gsm48_ie.c @@ -985,17 +985,17 @@ int gsm48_decode_freq_list(struct gsm_sysinfo_freq *f, uint8_t *cd, if (len >= 12) w[13] = r->w13; if (len >= 13) - w[14] = r->w15; + w[14] = (r->w14_hi << 2) | r->w14_lo; if (len >= 13) - w[15] = (r->w14_hi << 2) | r->w14_lo; + w[15] = r->w15; if (len >= 14) w[16] = (r->w16_hi << 3) | r->w16_lo; if (len >= 14) w[17] = r->w17; if (len >= 15) - w[18] = r->w19; + w[18] = (r->w18_hi << 3) | r->w18_lo; if (len >= 15) - w[19] = (r->w18_hi << 3) | r->w18_lo; + w[19] = r->w19; if (len >= 16) w[20] = (r->w20_hi << 3) | r->w20_lo; if (len >= 16) -- 1.7.9.5

1 0

3 OpenBSC moderator request(s) waiting
by openbsc-bounces＠lists.osmocom.org 13 Jan '14

13 Jan '14

The OpenBSC(a)lists.osmocom.org mailing list has 3 request(s) waiting for your consideration at: https://lists.osmocom.org/mailman/admindb/openbsc Please attend to this at your earliest convenience. This notice of pending requests, if any, will be sent out daily. Pending posts: From: kheimerl(a)cs.berkeley.edu on Thu Jan 9 21:27:04 2014 Subject: OsmoBTS on RAD1 Cause: Message body is too big: 5402368 bytes with a limit of 400 KB From: kaber(a)trash.net on Sun Jan 12 20:39:11 2014 Subject: Re: [RFC] [ADMIN] Making lists subscriber-only? Cause: Too many recipients to the message From: holger(a)freyther.de on Sun Jan 12 20:55:56 2014 Subject: Re: [RFC] [ADMIN] Making lists subscriber-only? Cause: Too many recipients to the message

1 0

abis_nm_pchan4chcomb API and return value
by Holger Hans Peter Freyther 12 Jan '14

12 Jan '14

Dear Harald, there is an open coverity issue in osmo-bts (CID 1040768) and it is about mixing enum types. enum abis_nm_chan_comb abis_nm_pchan4chcomb(uint8_t chcomb)

2 1

RFC fix last coverity report with SI handling in osmo-bts
by Holger Hans Peter Freyther 12 Jan '14

12 Jan '14

Hi, the coverity tools points out that it might be possible to access the si.buf atfer _MAX_SYSINFO_TYPE and before < 32. Looking at the code I also notice that: osmo_rsl2sitype takes an uint8_t but makes no range checking, same goes for osmo_sitype2rsl. I plan to apply the below patch for osmo-bts. This would resolve the last open Coverity report for osmo-bts. It would be nice if we could add range checking to osmo_rsl2sitype or check it in common/rsl.c of osmo-bts. diff --git a/src/common/sysinfo.c b/src/common/sysinfo.c index 62d2af9..9e2d4bb 100644 --- a/src/common/sysinfo.c +++ b/src/common/sysinfo.c @@ -135,7 +135,7 @@ uint8_t *lchan_sacch_get(struct gsm_lchan *lchan, struct gsm_time *g_time) { uint32_t tmp; - for (tmp = lchan->si.last + 1; tmp != lchan->si.last; tmp = (tmp + 1) % 32) { + for (tmp = lchan->si.last + 1; tmp != lchan->si.last; tmp = (tmp + 1) % _MAX_SYSINFO_TYPE) { if (lchan->si.valid & (1 << tmp)) { lchan->si.last = tmp; return lchan->si.buf[tmp];

2 1

Support for Flexi BTS
by Andreas Eversberg 10 Jan '14

10 Jan '14

hi, we managed to run a nokia flexi bts with openbsc. the bts type is "nokia-site". on channel request, the bts nacks the channel activation with cause 0x65 (protocol error, optional information element). by removing the Channel Identification IE from the channel activation message, everything worked, so we assume that this IE causes this error. we tried to modify it: - no zero-length Mobile Allocation included in Channel Identification IE - TLV instead of TV for Channel Description in Channel Identification IE - Channel Description in Channel Identification IE with type 0x62 instead of 0x64 all of these modifications result in the same error. so we came to the conclusion to remove the Channel Identification IE, since it is not really required. attached is the preview patch. does anyone have ABIS traces of a real network, to check how the IE is encoded there? is there any way to get more information from nokia bts why it rejects the channel when using this IE? regards, andreas

1 0

[PATCH] nitb/vty: Add test for E1 input keep-alive
by Jacob Erlbeck 10 Jan '14

10 Jan '14

This test checks, whether the configuration of e1_line keepalive works. It does not check, whether keep-alive is correctly implemented by the drivers. If the e1_line keepalive command is not provided by the libosmo-abis, this test will be skipped. Sponsored-by: On-Waves ehf --- openbsc/tests/vty_test_runner.py | 55 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/openbsc/tests/vty_test_runner.py b/openbsc/tests/vty_test_runner.py index 08c94b1..16eb213 100644 --- a/openbsc/tests/vty_test_runner.py +++ b/openbsc/tests/vty_test_runner.py @@ -230,6 +230,61 @@ class TestVTYNITB(TestVTYGenericBSC): res = self.vty.command("show paging-group 0 1234567") self.assertEquals(res, "%Paging group for IMSI 1234567 on BTS #0 is 7") + def testE1InputKeepAlive(self): + self.vty.enable() + self.vty.command("configure terminal") + self.vty.command("e1_input") + + self.assertEquals(self.vty.node(), 'config-e1_input') + + # Check for keepalive command + res = self.vty.command("list") + if not res.find(' e1_line <0-255> keepalive\r') > 0: + print("Skipping the E1 input keep-alive test") + return + + # Test invalid input + self.vty.verify("e1_line 200 keepalive", ["% Line 200 doesn't exist"]) + self.vty.verify("e1_line 200 keepalive 1", ["% Command incomplete."]) + self.vty.verify("e1_line 200 keepalive 1 2", ["% Command incomplete."]) + self.vty.verify("no e1_line 200 keepalive 1 2 3", ["% Unknown command."]) + + # Setup driver + self.vty.verify("e1_line 201 driver misdn", ['']) + self.vty.verify("e1_line 202 driver misdn_lapd", ['']) + self.vty.verify("e1_line 204 driver ipa", ['']) + + # Test misdn + self.vty.verify("e1_line 201 keepalive", ["% Driver 'misdn' does not support keep alive"]) + res = self.vty.command("write terminal") + self.assert_(res.find("no e1_line 201 keepalive\r") > 0) + + self.vty.verify("no e1_line 201 keepalive", [""]) + + # Test misdn_lapd + self.vty.verify("e1_line 202 keepalive", ["% Driver 'misdn_lapd' does not support keep alive"]) + res = self.vty.command("write terminal") + self.assert_(res.find("no e1_line 202 keepalive\r") > 0) + + self.vty.verify("no e1_line 202 keepalive", [""]) + + # Test ipa + self.vty.verify("e1_line 204 keepalive", [""]) + res = self.vty.command("write terminal") + self.assert_(res.find("e1_line 204 keepalive\r") > 0) + + self.vty.verify("e1_line 204 keepalive 10 1 2", [""]) + res = self.vty.command("write terminal") + self.assert_(res.find("e1_line 204 keepalive 10 1 2\r") > 0) + + self.vty.verify("no e1_line 204 keepalive", [""]) + + # Check whether keep alive is disabled again on each line + res = self.vty.command("write terminal") + self.assert_(res.find("no e1_line 201 keepalive\r") > 0) + self.assert_(res.find("no e1_line 202 keepalive\r") > 0) + self.assert_(res.find("no e1_line 204 keepalive\r") > 0) + class TestVTYBSC(TestVTYGenericBSC): def vty_command(self): -- 1.7.9.5

1 0

Potential bug in trx_if.c
by Kurtis Heimerl 09 Jan '14

09 Jan '14

Hey all, I've been working on getting the Range Networks RAD1 working with OsmoBTS. I *think* I've found a bug in trx_if.c. Basically, tsc checks the bsic variable and bsic checks the tsc variable. It *may* be intentional but I doubt that and I wanted to note it before I moved on. Patch is attached. Thanks!

2 1

[PATCH] sms: Fix gsm_7bit legacy functions return value
by Jacob Erlbeck 09 Jan '14

09 Jan '14

The legacy 7bit conversion functions (those without the '_n_' in the name) gave wrong return values on 64 bit platforms due to unproper signed/unsigned conversions and the usage of SIZE_MAX. This patch fixes this by using a smaller max size (see GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, currently set to 64k) for the legacy wrappers and by using unsigned int for max_septets. In addition, there are tests now that check the return values of legacy encoding and decoding. Sponsored-by: On-Waves ehf --- include/osmocom/gsm/gsm_utils.h | 3 +++ src/gsm/gsm_utils.c | 17 +++++++++++------ tests/sms/sms_test.c | 22 ++++++++++++++++++++++ 3 files changed, 36 insertions(+), 6 deletions(-) diff --git a/include/osmocom/gsm/gsm_utils.h b/include/osmocom/gsm/gsm_utils.h index f412e3e..02bfe4c 100644 --- a/include/osmocom/gsm/gsm_utils.h +++ b/include/osmocom/gsm/gsm_utils.h @@ -195,6 +195,9 @@ enum gsm_chan_t { }; /* Deprectated functions */ +/* Limit encoding and decoding to use no more than this amount of buffer bytes */ +#define GSM_7BIT_LEGACY_MAX_BUFFER_SIZE 0x10000 + int gsm_7bit_decode(char *decoded, const uint8_t *user_data, uint8_t length) OSMO_DEPRECATED("Use gsm_7bit_decode_n() instead"); int gsm_7bit_decode_ussd(char *decoded, const uint8_t *user_data, uint8_t length) OSMO_DEPRECATED("Use gsm_7bit_decode_n_ussd() instead"); int gsm_7bit_encode(uint8_t *result, const char *data) OSMO_DEPRECATED("Use gsm_7bit_encode_n() instead"); diff --git a/src/gsm/gsm_utils.c b/src/gsm/gsm_utils.c index 5241c91..198ec69 100644 --- a/src/gsm/gsm_utils.c +++ b/src/gsm/gsm_utils.c @@ -273,7 +273,7 @@ int gsm_7bit_encode_n(uint8_t *result, size_t n, const char *data, int *octets) { int y = 0; int o; - int max_septets = n * 8 / 7; + size_t max_septets = n * 8 / 7; /* prepare for the worst case, every character expanding to two bytes */ uint8_t *rdata = calloc(strlen(data) * 2, sizeof(uint8_t)); @@ -683,7 +683,8 @@ uint32_t gprs_tmsi2tlli(uint32_t p_tmsi, enum gprs_tlli_type type) int gsm_7bit_decode(char *text, const uint8_t *user_data, uint8_t septet_l) { - gsm_7bit_decode_n(text, SIZE_MAX, user_data, septet_l); + gsm_7bit_decode_n(text, GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, + user_data, septet_l); /* Mimic the original behaviour. */ return septet_l; @@ -691,21 +692,25 @@ int gsm_7bit_decode(char *text, const uint8_t *user_data, uint8_t septet_l) int gsm_7bit_decode_ussd(char *text, const uint8_t *user_data, uint8_t length) { - return gsm_7bit_decode_n_ussd(text, SIZE_MAX, user_data, length); + return gsm_7bit_decode_n_ussd(text, GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, + user_data, length); } int gsm_7bit_encode(uint8_t *result, const char *data) { int out; - return gsm_7bit_encode_n(result, SIZE_MAX, data, &out); + return gsm_7bit_encode_n(result, GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, + data, &out); } int gsm_7bit_encode_ussd(uint8_t *result, const char *data, int *octets) { - return gsm_7bit_encode_n_ussd(result, SIZE_MAX, data, octets); + return gsm_7bit_encode_n_ussd(result, GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, + data, octets); } int gsm_7bit_encode_oct(uint8_t *result, const char *data, int *octets) { - return gsm_7bit_encode_n(result, SIZE_MAX, data, octets); + return gsm_7bit_encode_n(result, GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, + data, octets); } diff --git a/tests/sms/sms_test.c b/tests/sms/sms_test.c index 2c9d8d8..755b321 100644 --- a/tests/sms/sms_test.c +++ b/tests/sms/sms_test.c @@ -280,6 +280,17 @@ int main(int argc, char** argv) /* test 7-bit encoding */ for (i = 0; i < ARRAY_SIZE(test_encode); ++i) { + /* Test legacy function (return value only) */ + septet_length = gsm_7bit_encode(coded, + (const char *) test_encode[i].input); + printf("Legacy encode case %d: " + "septet length %d (expected %d)\n" + , i + , septet_length, test_encode[i].expected_septet_length + ); + OSMO_ASSERT (septet_length == test_encode[i].expected_septet_length); + + /* Test new function */ memset(coded, 0x42, sizeof(coded)); septet_length = gsm_7bit_encode_n(coded, sizeof(coded), (const char *) test_encode[i].input, @@ -296,6 +307,7 @@ int main(int argc, char** argv) OSMO_ASSERT (octets_written == test_encode[i].expected_octet_length); OSMO_ASSERT (octets_written == computed_octet_length); OSMO_ASSERT (memcmp(coded, test_encode[i].expected, octets_written) == 0); + OSMO_ASSERT (septet_length == test_encode[i].expected_septet_length); /* check buffer limiting */ memset(coded, 0xaa, sizeof(coded)); @@ -357,6 +369,16 @@ int main(int argc, char** argv) /* test 7-bit decoding */ for (i = 0; i < ARRAY_SIZE(test_decode); ++i) { + /* Test legacy function (return value only) */ + if (!test_decode[i].ud_hdr_ind) { + nchars = gsm_7bit_decode(result, test_decode[i].input, + test_decode[i].expected_septet_length); + printf("Legacy decode case %d: " + "return value %d (expected %d)\n", + i, nchars, test_decode[i].expected_septet_length); + } + + /* Test new function */ memset(result, 0x42, sizeof(result)); nchars = gsm_7bit_decode_n_hdr(result, sizeof(result), test_decode[i].input, test_decode[i].expected_septet_length, test_decode[i].ud_hdr_ind); -- 1.7.9.5

2 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC