OpenBSC December 2013

openbsc@lists.osmocom.org

15 participants
32 discussions

OsmoDevCon 2014 / Date / Venue

by Harald Welte

Hi all, time is moving fast, and I want to start some initial discussion and planning for OsmoDevCon 2014. There are basically four questions which I'm raising below. Please provide your feedback to the osmocom-event-orga mailing list only, to avoid cross-posting over all the project lists. = Who? = My intention is to keep it an 'active developer/contributer only' event, like we had it before. I would also want to keep the group relatively small, to keep the 'Osmocom family' atmosphere. If desired, we could have one half or full day of public prsentations in a larger auditorium, but the developer meeting should be a close group, as known so far. = Where? = If we keep the number of attendees within the same range as this year, then I'm sure we could again hold it at the same venue. I know it is not perfect, but it is a place that we have access to, 24 hours per day, and free of cost for community projects like osmocom.org. If the community wants a larger event, then this is something that would require more funds and much more time organizing. And that is something that I personally could not offer to take care of, sorry. I'm happy to attend and support any larger events, but I'm unable to take care of fundraising and venue research. = When? = Q1/2014. In January, I'm not aware of any 'blocker' events. February, there is Fosdem (Feb 1 + Feb 2), and MWC from Feb 24 through Feb 27. In March there is CeBIT (March 10-14) and Easter holidays (with EasterHegg March 17-21). Did I miss any other FOSS / mobile event that might clash in Q1? So my preference woudl be to do it either late January (23-26) or in February (6-9 or 13-16). Any preferences regarding preferred schedule? Once we have some concencus here on the list [and we want to do it in the same size / venue], I'll talk to IN-Berlin. = What? = I think that question is easy to answer, if we have the above three figured out... There's no shortage of topics, I suppose. You can start adding your suggestions to http://openbsc.osmocom.org/trac/wiki/OsmoDevCon2014 Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

11 years, 7 months

RFC adding another debug log statement

by Holger Hans Peter Freyther

Good Morning, during the 30C3 we had some "broken channels" because the BTS didn't respond within four seconds to a Channel Activation/Deactivation. I started to look at it with perf and "snprintf" appears to be called a lot and did show up in the top. snprintf is mostly called from within osmo_hexdump and gsm_lchan_name. Both of these function calls are used in our logging calls throughout the code. Going forward I think we can do * Remove some LOGP/DEBUG with osmo_hexdump (I did so for some call sites in the osmo-bts) * Start handlin -DNDEBUG inside logging.h and undefine/not define 'DEBUG' in logging.h. But this would take away some code paths that would be nice to look at. * gsm_lchan_name could 'cache' the last lchan and then not call snprintf. I did this once but it didn't appear to be much help. I will have another look. * Introduce a DEBUGQ, 'Q' for quick and check if the output would be enabled and then log. This can be useful when the cost of checking all targets twice is smaller than the cost of snprintf. comments? holger diff --git a/include/osmocom/core/logging.h b/include/osmocom/core/logging.h index 1d57e22..a8476d2 100644 --- a/include/osmocom/core/logging.h +++ b/include/osmocom/core/logging.h @@ -27,6 +27,10 @@ #define DEBUGPC(ss, fmt, args...) #endif +#define DEBUGQ(ss, fmt, args) \ + if (log_would_log(ss, LOGL_DEBUG)) \ + logp(ss, __FILE__, __LINE__, 0, fmt ## args); + void osmo_vlogp(int subsys, int level, const char *file, int line, int cont, const char *format, va_list ap); @@ -215,6 +219,9 @@ const char *log_vty_command_description(const struct log_info *info); struct log_target *log_target_find(int type, const char *fname); extern struct llist_head osmo_log_target_list; +/* helper to check if it would log without using filter_fn */ +int log_would_log(int subsys, unsigned int level); + /*! @} */ #endif /* _OSMOCORE_LOGGING_H */ diff --git a/src/logging.c b/src/logging.c index 2e3a80a..1e64ba5 100644 --- a/src/logging.c +++ b/src/logging.c @@ -268,6 +268,26 @@ err: target->output(target, level, buf); } + +static int cat_enabled(const struct log_target *tar, + const struct log_category *category, int level) +{ + /* subsystem is not supposed to be logged */ + if (!category->enabled) + return 0; + + /* Check the global log level */ + if (tar->loglevel != 0 && level < tar->loglevel) + return 0; + + /* Check the category log level */ + if (tar->loglevel == 0 && category->loglevel != 0 && + level < category->loglevel) + return 0; + + return 1; +} + /*! \brief vararg version of logging function */ void osmo_vlogp(int subsys, int level, const char *file, int line, int cont, const char *format, va_list ap) @@ -286,17 +306,8 @@ void osmo_vlogp(int subsys, int level, const char *file, int line, va_list bp; category = &tar->categories[subsys]; - /* subsystem is not supposed to be logged */ - if (!category->enabled) - continue; - /* Check the global log level */ - if (tar->loglevel != 0 && level < tar->loglevel) - continue; - - /* Check the category log level */ - if (tar->loglevel == 0 && category->loglevel != 0 && - level < category->loglevel) + if (!cat_enabled(tar, category, level)) continue; /* Apply filters here... if that becomes messy we will @@ -799,4 +810,19 @@ int log_init(const struct log_info *inf, void *ctx) return 0; } +int log_would_log(int subsys, unsigned int level) +{ + struct log_target *tar; + + llist_for_each_entry(tar, &osmo_log_target_list, entry) { + if (!cat_enabled(tar, &tar->categories[subsys], level)) + continue; + + if ((tar->filter_map & LOG_FILTER_ALL) != 0) + return 1; + } + + return 0; +} + /*! @} */

11 years, 7 months

Re: OsmoDevCon 2014 / Date / Venue

by Harald Welte

Dear all, just a quick reminder: On Sat, Nov 30, 2013 at 02:57:20PM +0100, Harald Welte wrote: > Please make sure to add your name to the list at > https://openbsc.osmocom.org/trac/wiki/OsmoDevCon2014 until December > 31st (latest). If you don't have a wiki account, ask somebody who has > one, apply for a wiki account or send an e-mail to me. so today is the last chance to indicate your intrest in attending OsmoDevCon. I'm surprised to not have seen the following names in the list: pablo, peter, nion, steve-m, dmitry, kaber. It would be great to have you around again this year. Looking forward to meeting all of you again! Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

11 years, 7 months

[PATCH] Use generic osmocom auth API

by Max

--- openbsc/src/libmsc/auth.c | 69 +++++++++++++++++++---------------------------- 1 file changed, 28 insertions(+), 41 deletions(-) diff --git a/openbsc/src/libmsc/auth.c b/openbsc/src/libmsc/auth.c index 10d8edf..d04b2fc 100644 --- a/openbsc/src/libmsc/auth.c +++ b/openbsc/src/libmsc/auth.c @@ -24,47 +24,11 @@ #include <openbsc/debug.h> #include <openbsc/auth.h> #include <openbsc/gsm_data.h> - -#include <osmocom/gsm/comp128.h> +#include <osmocom/crypt/auth.h> #include <stdlib.h> -static int -_use_xor(struct gsm_auth_info *ainfo, struct gsm_auth_tuple *atuple) -{ - int i, l = ainfo->a3a8_ki_len; - - if ((l > A38_XOR_MAX_KEY_LEN) || (l < A38_XOR_MIN_KEY_LEN)) { - LOGP(DMM, LOGL_ERROR, "Invalid XOR key (len=%d) %s\n", - ainfo->a3a8_ki_len, - osmo_hexdump(ainfo->a3a8_ki, ainfo->a3a8_ki_len)); - return -1; - } - - for (i=0; i<4; i++) - atuple->sres[i] = atuple->rand[i] ^ ainfo->a3a8_ki[i]; - for (i=4; i<12; i++) - atuple->kc[i-4] = atuple->rand[i] ^ ainfo->a3a8_ki[i]; - - return 0; -} - -static int -_use_comp128_v1(struct gsm_auth_info *ainfo, struct gsm_auth_tuple *atuple) -{ - if (ainfo->a3a8_ki_len != A38_COMP128_KEY_LEN) { - LOGP(DMM, LOGL_ERROR, "Invalid COMP128v1 key (len=%d) %s\n", - ainfo->a3a8_ki_len, - osmo_hexdump(ainfo->a3a8_ki, ainfo->a3a8_ki_len)); - return -1; - } - - comp128(ainfo->a3a8_ki, atuple->rand, atuple->sres, atuple->kc); - - return 0; -} - /* Return values * -1 -> Internal error * 0 -> Not available @@ -76,6 +40,11 @@ int auth_get_tuple_for_subscr(struct gsm_auth_tuple *atuple, { struct gsm_auth_info ainfo; int i, rc; + static struct osmo_sub_auth_data auth = { + .type = OSMO_AUTH_TYPE_GSM + }; + struct osmo_auth_vector _vec; + struct osmo_auth_vector *vec = &_vec; /* Get subscriber info (if any) */ rc = db_get_authinfo_for_subscr(&ainfo, subscr); @@ -109,13 +78,23 @@ int auth_get_tuple_for_subscr(struct gsm_auth_tuple *atuple, return 0; case AUTH_ALGO_XOR: - if (_use_xor(&ainfo, atuple)) - return 0; + auth.algo = OSMO_AUTH_ALG_XOR; + if ((ainfo.a3a8_ki_len > A38_XOR_MAX_KEY_LEN) || (ainfo.a3a8_ki_len < A38_XOR_MIN_KEY_LEN)) { + LOGP(DMM, LOGL_ERROR, "Invalid XOR key (len=%d) %s\n", + ainfo.a3a8_ki_len, + osmo_hexdump(ainfo.a3a8_ki, ainfo.a3a8_ki_len)); + return -1; + } break; case AUTH_ALGO_COMP128v1: - if (_use_comp128_v1(&ainfo, atuple)) - return 0; + auth.algo = OSMO_AUTH_ALG_COMP128v1; + if (ainfo.a3a8_ki_len != A38_COMP128_KEY_LEN) { + LOGP(DMM, LOGL_ERROR, "Invalid COMP128v1 key (len=%d) %s\n", + ainfo.a3a8_ki_len, + osmo_hexdump(ainfo.a3a8_ki, ainfo.a3a8_ki_len)); + return -1; + } break; default: @@ -124,6 +103,14 @@ int auth_get_tuple_for_subscr(struct gsm_auth_tuple *atuple, return 0; } + memcpy(auth.u.gsm.ki, ainfo.a3a8_ki, sizeof(auth.u.gsm.ki)); + + if (osmo_auth_gen_vec(vec, &auth, atuple->rand) < 0) + return -1; + + memcpy(atuple->sres, vec->sres, 4); + memcpy(atuple->kc, vec->kc, 8); + db_sync_lastauthtuple_for_subscr(atuple, subscr); DEBUGP(DMM, "Need to do authentication and ciphering\n"); -- 1.8.3.2 --------------000607000700020905030202--

11 years, 7 months

[PATCH] Use generic osmocom auth API

by Max

11 years, 7 months

[PATCH 1/3] mgcp/test: Add test cases for constant RTP sequence number

by Jacob Erlbeck

This adds two test cases: 1. Packet repetition (dSeq=0, dTS=0) 2. Broken seqNo (dSeq=0, dTS=160) The second had been already present in the test cases, but it was a mere copy&paste mistake which turned out to be rather helpful. This patch therefore turns it into a documented test case. Sponsored-by: On-Waves ehf --- openbsc/tests/mgcp/mgcp_test.c | 22 +++++++++++++++++++++- openbsc/tests/mgcp/mgcp_test.ok | 32 ++++++++++++++++++++++++++++---- 2 files changed, 49 insertions(+), 5 deletions(-) diff --git a/openbsc/tests/mgcp/mgcp_test.c b/openbsc/tests/mgcp/mgcp_test.c index 9777a4d..b93ce7e 100644 --- a/openbsc/tests/mgcp/mgcp_test.c +++ b/openbsc/tests/mgcp/mgcp_test.c @@ -605,7 +605,27 @@ struct rtp_packet_info test_rtp_packets1[] = { {0.380000, 20, "\x80\x62\x00\x14\x00\x00\x8C\x58\x10\x20\x30\x40" "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, /* RTP: SeqNo=21, TS=36088 */ - {0.380000, 20, "\x80\x62\x00\x14\x00\x00\x8C\xF8\x10\x20\x30\x40" + {0.380000, 20, "\x80\x62\x00\x15\x00\x00\x8C\xF8\x10\x20\x30\x40" + "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, + /* Repeat last packet */ + /* RTP: SeqNo=21, TS=36088 */ + {0.400000, 20, "\x80\x62\x00\x15\x00\x00\x8C\xF8\x10\x20\x30\x40" + "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, + /* RTP: SeqNo=22, TS=36248 */ + {0.420000, 20, "\x80\x62\x00\x16\x00\x00\x8D\x98\x10\x20\x30\x40" + "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, + /* RTP: SeqNo=23, TS=36408 */ + {0.440000, 20, "\x80\x62\x00\x17\x00\x00\x8E\x38\x10\x20\x30\x40" + "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, + /* Don't increment SeqNo but increment timestamp by 160 */ + /* RTP: SeqNo=23, TS=36568 */ + {0.460000, 20, "\x80\x62\x00\x17\x00\x00\x8E\xD8\x10\x20\x30\x40" + "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, + /* RTP: SeqNo=24, TS=36728 */ + {0.480000, 20, "\x80\x62\x00\x18\x00\x00\x8F\x78\x10\x20\x30\x40" + "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, + /* RTP: SeqNo=25, TS=36888 */ + {0.500000, 20, "\x80\x62\x00\x19\x00\x00\x90\x18\x10\x20\x30\x40" "\x01\x23\x45\x67\x89\xAB\xCD\xEF"}, }; diff --git a/openbsc/tests/mgcp/mgcp_test.ok b/openbsc/tests/mgcp/mgcp_test.ok index f9dd7cb..783f3a5 100644 --- a/openbsc/tests/mgcp/mgcp_test.ok +++ b/openbsc/tests/mgcp/mgcp_test.ok @@ -85,7 +85,13 @@ TS: 2480, dTS: 160, TS Errs: in 7, out 7 TS: 2640, dTS: 160, TS Errs: in 7, out 7 TS: 2960, dTS: 160, TS Errs: in 7, out 7 TS: 3120, dTS: 160, TS Errs: in 7, out 7 -TS: 3280, dTS: 160, TS Errs: in 8, out 8 +TS: 3280, dTS: 160, TS Errs: in 7, out 7 +TS: 3280, dTS: 160, TS Errs: in 7, out 7 +TS: 3440, dTS: 160, TS Errs: in 7, out 7 +TS: 3600, dTS: 160, TS Errs: in 7, out 7 +TS: 3760, dTS: 160, TS Errs: in 8, out 8 +TS: 3920, dTS: 160, TS Errs: in 8, out 8 +TS: 4080, dTS: 160, TS Errs: in 8, out 8 Testing packet error detection. Output SSRC changed to 11223344 TS: 0, dTS: 0, TS Errs: in 0, out 0 @@ -109,7 +115,13 @@ TS: 35288, dTS: 160, TS Errs: in 7, out 7 TS: 35448, dTS: 160, TS Errs: in 7, out 7 TS: 35768, dTS: 160, TS Errs: in 7, out 7 TS: 35928, dTS: 160, TS Errs: in 7, out 7 -TS: 36088, dTS: 160, TS Errs: in 8, out 8 +TS: 36088, dTS: 160, TS Errs: in 7, out 7 +TS: 36088, dTS: 160, TS Errs: in 7, out 7 +TS: 36248, dTS: 160, TS Errs: in 7, out 7 +TS: 36408, dTS: 160, TS Errs: in 7, out 7 +TS: 36568, dTS: 160, TS Errs: in 8, out 8 +TS: 36728, dTS: 160, TS Errs: in 8, out 8 +TS: 36888, dTS: 160, TS Errs: in 8, out 8 Testing packet error detection, patch timestamps. Output SSRC changed to 11223344 TS: 0, dTS: 0, TS Errs: in 0, out 0 @@ -133,7 +145,13 @@ TS: 35368, dTS: 160, TS Errs: in 7, out 0 TS: 35528, dTS: 160, TS Errs: in 7, out 0 TS: 35848, dTS: 160, TS Errs: in 7, out 0 TS: 36008, dTS: 160, TS Errs: in 7, out 0 -TS: 36008, dTS: 160, TS Errs: in 8, out 0 +TS: 36168, dTS: 160, TS Errs: in 7, out 0 +TS: 36168, dTS: 160, TS Errs: in 7, out 0 +TS: 36328, dTS: 160, TS Errs: in 7, out 0 +TS: 36488, dTS: 160, TS Errs: in 7, out 0 +TS: 36488, dTS: 160, TS Errs: in 8, out 0 +TS: 36648, dTS: 160, TS Errs: in 8, out 0 +TS: 36808, dTS: 160, TS Errs: in 8, out 0 Testing packet error detection, patch SSRC, patch timestamps. Output SSRC changed to 11223344 TS: 0, dTS: 0, TS Errs: in 0, out 0 @@ -156,5 +174,11 @@ TS: 2560, dTS: 160, TS Errs: in 7, out 0 TS: 2720, dTS: 160, TS Errs: in 7, out 0 TS: 3040, dTS: 160, TS Errs: in 7, out 0 TS: 3200, dTS: 160, TS Errs: in 7, out 0 -TS: 3200, dTS: 160, TS Errs: in 8, out 0 +TS: 3360, dTS: 160, TS Errs: in 7, out 0 +TS: 3360, dTS: 160, TS Errs: in 7, out 0 +TS: 3520, dTS: 160, TS Errs: in 7, out 0 +TS: 3680, dTS: 160, TS Errs: in 7, out 0 +TS: 3680, dTS: 160, TS Errs: in 8, out 0 +TS: 3840, dTS: 160, TS Errs: in 8, out 0 +TS: 4000, dTS: 160, TS Errs: in 8, out 0 Done -- 1.7.9.5

11 years, 7 months

[PATCH] Add EFR support to TRAU muxer + test case

by Andreas Eversberg

Decoding and encoding of FR and EFR TRAU frames are put into seperate functions. CRC check is done to detect bad EFR TRAU frames. The test case includes FR and EFR transcoding. EFR support was tested with Nokia InSite BTS and Siemens BS11. --- openbsc/configure.ac | 1 + openbsc/include/openbsc/mncc.h | 1 + openbsc/include/openbsc/trau_mux.h | 10 ++ openbsc/src/libmsc/gsm_04_08.c | 1 + openbsc/src/libtrau/trau_mux.c | 307 +++++++++++++++++++++++++++++------- openbsc/tests/Makefile.am | 2 +- openbsc/tests/testsuite.at | 6 + openbsc/tests/trau/Makefile.am | 17 ++ openbsc/tests/trau/trau_test.c | 82 ++++++++++ 9 files changed, 368 insertions(+), 59 deletions(-) create mode 100644 openbsc/tests/trau/Makefile.am create mode 100644 openbsc/tests/trau/trau_test.c diff --git a/openbsc/configure.ac b/openbsc/configure.ac index 081e416..fe99569 100644 --- a/openbsc/configure.ac +++ b/openbsc/configure.ac @@ -169,6 +169,7 @@ AC_OUTPUT( tests/si/Makefile tests/abis/Makefile tests/smpp/Makefile + tests/trau/Makefile doc/Makefile doc/examples/Makefile Makefile) diff --git a/openbsc/include/openbsc/mncc.h b/openbsc/include/openbsc/mncc.h index 4a99bb1..ffc247b 100644 --- a/openbsc/include/openbsc/mncc.h +++ b/openbsc/include/openbsc/mncc.h @@ -95,6 +95,7 @@ struct gsm_call { #define GSM_TCHF_FRAME 0x0300 #define GSM_TCHF_FRAME_EFR 0x0301 +#define GSM_TCHF_BAD_FRAME 0x03ff #define MNCC_SOCKET_HELLO 0x0400 diff --git a/openbsc/include/openbsc/trau_mux.h b/openbsc/include/openbsc/trau_mux.h index 667f623..d211d8d 100644 --- a/openbsc/include/openbsc/trau_mux.h +++ b/openbsc/include/openbsc/trau_mux.h @@ -56,3 +56,13 @@ int switch_trau_mux(struct gsm_lchan *old_lchan, struct gsm_lchan *new_lchan); /* callback invoked if we receive TRAU frames */ int subch_cb(struct subch_demux *dmx, int ch, uint8_t *data, int len, void *_priv); + +/* TRAU frame transcoding */ +struct msgb *trau_decode_fr(uint32_t callref, + const struct decoded_trau_frame *tf); +struct msgb *trau_decode_efr(uint32_t callref, + const struct decoded_trau_frame *tf); +void trau_encode_fr(struct decoded_trau_frame *tf, + const unsigned char *data); +void trau_encode_efr(struct decoded_trau_frame *tf, + const unsigned char *data); diff --git a/openbsc/src/libmsc/gsm_04_08.c b/openbsc/src/libmsc/gsm_04_08.c index 7a92e4d..2df27a0 100644 --- a/openbsc/src/libmsc/gsm_04_08.c +++ b/openbsc/src/libmsc/gsm_04_08.c @@ -2910,6 +2910,7 @@ int mncc_tx_to_cc(struct gsm_network *net, int msg_type, void *arg) case MNCC_FRAME_RECV: return tch_recv_mncc(net, data->callref, 1); case GSM_TCHF_FRAME: + case GSM_TCHF_FRAME_EFR: /* Find callref */ trans = trans_find_by_callref(net, data->callref); if (!trans) { diff --git a/openbsc/src/libtrau/trau_mux.c b/openbsc/src/libtrau/trau_mux.c index d25e78f..c73884b 100644 --- a/openbsc/src/libtrau/trau_mux.c +++ b/openbsc/src/libtrau/trau_mux.c @@ -31,6 +31,7 @@ #include <osmocom/core/talloc.h> #include <openbsc/trau_upqueue.h> #include <openbsc/transaction.h> +#include <osmocom/core/crcgen.h> /* this corresponds to the bit-lengths of the individual codec * parameters as indicated in Table 1.1 of TS 06.10 */ @@ -47,6 +48,53 @@ static const uint8_t gsm_fr_map[] = { 3, 3, 3, 3 }; + +/* + * EFR TRAU parity + * + * g(x) = x^3 + x^1 + 1 + */ +const struct osmo_crc8gen_code gsm0860_efr_crc3 = { + .bits = 3, + .poly = 0x3, + .init = 0x0, + .remainder = 0x7, +}; + +/* EFR parity bits */ +static inline void efr_parity_bits_1(ubit_t *check_bits, const ubit_t *d_bits) +{ + memcpy(check_bits + 0 , d_bits + 0, 22); + memcpy(check_bits + 22 , d_bits + 24, 3); + check_bits[25] = d_bits[28]; +} + +static inline void efr_parity_bits_2(ubit_t *check_bits, const ubit_t *d_bits) +{ + memcpy(check_bits + 0 , d_bits + 42, 10); + memcpy(check_bits + 10 , d_bits + 90, 2); +} + +static inline void efr_parity_bits_3(ubit_t *check_bits, const ubit_t *d_bits) +{ + memcpy(check_bits + 0 , d_bits + 98, 5); + check_bits[5] = d_bits[104]; + memcpy(check_bits + 6 , d_bits + 143, 2); +} + +static inline void efr_parity_bits_4(ubit_t *check_bits, const ubit_t *d_bits) +{ + memcpy(check_bits + 0 , d_bits + 151, 10); + memcpy(check_bits + 10 , d_bits + 199, 2); +} + +static inline void efr_parity_bits_5(ubit_t *check_bits, const ubit_t *d_bits) +{ + memcpy(check_bits + 0 , d_bits + 207, 5); + check_bits[5] = d_bits[213]; + memcpy(check_bits + 6 , d_bits + 252, 2); +} + struct map_entry { struct llist_head list; struct gsm_e1_subslot src, dst; @@ -159,7 +207,117 @@ lookup_trau_upqueue(const struct gsm_e1_subslot *src) return NULL; } -static const uint8_t c_bits_check[] = { 0, 0, 0, 1, 0 }; +static const uint8_t c_bits_check_fr[] = { 0, 0, 0, 1, 0 }; +static const uint8_t c_bits_check_efr[] = { 1, 1, 0, 1, 0 }; + +struct msgb *trau_decode_fr(uint32_t callref, + const struct decoded_trau_frame *tf) +{ + struct msgb *msg; + struct gsm_data_frame *frame; + unsigned char *data; + int i, j, k, l, o; + + msg = msgb_alloc(sizeof(struct gsm_data_frame) + 33, + "GSM-DATA"); + if (!msg) + return NULL; + + frame = (struct gsm_data_frame *)msg->data; + memset(frame, 0, sizeof(struct gsm_data_frame)); + data = frame->data; + data[0] = 0xd << 4; + /* reassemble d-bits */ + i = 0; /* counts bits */ + j = 4; /* counts output bits */ + k = gsm_fr_map[0]-1; /* current number bit in element */ + l = 0; /* counts element bits */ + o = 0; /* offset input bits */ + while (i < 260) { + data[j/8] |= (tf->d_bits[k+o] << (7-(j%8))); + if (--k < 0) { + o += gsm_fr_map[l]; + k = gsm_fr_map[++l]-1; + } + i++; + j++; + } + frame->msg_type = GSM_TCHF_FRAME; + frame->callref = callref; + msgb_put(msg, sizeof(struct gsm_data_frame) + 33); + + return msg; +} + +struct msgb *trau_decode_efr(uint32_t callref, + const struct decoded_trau_frame *tf) +{ + struct msgb *msg; + struct gsm_data_frame *frame; + unsigned char *data; + int i, j, rc; + ubit_t check_bits[26]; + + msg = msgb_alloc(sizeof(struct gsm_data_frame) + 31, + "GSM-DATA"); + if (!msg) + return NULL; + + frame = (struct gsm_data_frame *)msg->data; + memset(frame, 0, sizeof(struct gsm_data_frame)); + frame->msg_type = GSM_TCHF_FRAME_EFR; + frame->callref = callref; + msgb_put(msg, sizeof(struct gsm_data_frame) + 31); + + if (tf->c_bits[11]) /* BFI */ + goto bad_frame; + + data = frame->data; + data[0] = 0xc << 4; + /* reassemble d-bits */ + for (i = 1, j = 4; i < 39; i++, j++) + data[j/8] |= (tf->d_bits[i] << (7-(j%8))); + efr_parity_bits_1(check_bits, tf->d_bits); + rc = osmo_crc8gen_check_bits(&gsm0860_efr_crc3, check_bits, 26, + tf->d_bits + 39); + if (rc) + goto bad_frame; + for (i = 42, j = 42; i < 95; i++, j++) + data[j/8] |= (tf->d_bits[i] << (7-(j%8))); + efr_parity_bits_2(check_bits, tf->d_bits); + rc = osmo_crc8gen_check_bits(&gsm0860_efr_crc3, check_bits, 12, + tf->d_bits + 95); + if (rc) + goto bad_frame; + for (i = 98, j = 95; i < 148; i++, j++) + data[j/8] |= (tf->d_bits[i] << (7-(j%8))); + efr_parity_bits_3(check_bits, tf->d_bits); + rc = osmo_crc8gen_check_bits(&gsm0860_efr_crc3, check_bits, 8, + tf->d_bits + 148); + if (rc) + goto bad_frame; + for (i = 151, j = 145; i < 204; i++, j++) + data[j/8] |= (tf->d_bits[i] << (7-(j%8))); + efr_parity_bits_4(check_bits, tf->d_bits); + rc = osmo_crc8gen_check_bits(&gsm0860_efr_crc3, check_bits, 12, + tf->d_bits + 204); + if (rc) + goto bad_frame; + for (i = 207, j = 198; i < 257; i++, j++) + data[j/8] |= (tf->d_bits[i] << (7-(j%8))); + efr_parity_bits_5(check_bits, tf->d_bits); + rc = osmo_crc8gen_check_bits(&gsm0860_efr_crc3, check_bits, 8, + tf->d_bits + 257); + if (rc) + goto bad_frame; + + return msg; + +bad_frame: + frame->msg_type = GSM_TCHF_BAD_FRAME; + + return msg; +} /* we get called by subchan_demux */ int trau_mux_input(struct gsm_e1_subslot *src_e1_ss, @@ -178,45 +336,25 @@ int trau_mux_input(struct gsm_e1_subslot *src_e1_ss, return rc; if (!dst_e1_ss) { - struct msgb *msg; - struct gsm_data_frame *frame; - unsigned char *data; - int i, j, k, l, o; + struct msgb *msg = NULL; /* frame shall be sent to upqueue */ if (!(ue = lookup_trau_upqueue(src_e1_ss))) return -EINVAL; if (!ue->callref) return -EINVAL; - if (memcmp(tf.c_bits, c_bits_check, sizeof(c_bits_check))) + if (!memcmp(tf.c_bits, c_bits_check_fr, 5)) + msg = trau_decode_fr(ue->callref, &tf); + else if (!memcmp(tf.c_bits, c_bits_check_efr, 5)) + msg = trau_decode_efr(ue->callref, &tf); + else { DEBUGPC(DLMUX, "illegal trau (C1-C5) %s\n", - osmo_hexdump(tf.c_bits, sizeof(c_bits_check))); - msg = msgb_alloc(sizeof(struct gsm_data_frame) + 33, - "GSM-DATA"); + osmo_hexdump(tf.c_bits, 5)); + DEBUGPC(DLMUX, "test trau (C1-C5) %s\n", + osmo_hexdump(c_bits_check_efr, 5)); + return -EINVAL; + } if (!msg) return -ENOMEM; - - frame = (struct gsm_data_frame *)msg->data; - memset(frame, 0, sizeof(struct gsm_data_frame)); - data = frame->data; - data[0] = 0xd << 4; - /* reassemble d-bits */ - i = 0; /* counts bits */ - j = 4; /* counts output bits */ - k = gsm_fr_map[0]-1; /* current number bit in element */ - l = 0; /* counts element bits */ - o = 0; /* offset input bits */ - while (i < 260) { - data[j/8] |= (tf.d_bits[k+o] << (7-(j%8))); - if (--k < 0) { - o += gsm_fr_map[l]; - k = gsm_fr_map[++l]-1; - } - i++; - j++; - } - frame->msg_type = GSM_TCHF_FRAME; - frame->callref = ue->callref; - msgb_put(msg, sizeof(struct gsm_data_frame) + 33); trau_tx_to_mncc(ue->net, msg); return 0; @@ -276,13 +414,86 @@ int trau_recv_lchan(struct gsm_lchan *lchan, uint32_t callref) return 0; } +void trau_encode_fr(struct decoded_trau_frame *tf, + const unsigned char *data) +{ + int i, j, k, l, o; + + /* set c-bits and t-bits */ + tf->c_bits[0] = 1; + tf->c_bits[1] = 1; + tf->c_bits[2] = 1; + tf->c_bits[3] = 0; + tf->c_bits[4] = 0; + memset(&tf->c_bits[5], 0, 6); + memset(&tf->c_bits[11], 1, 10); + memset(&tf->t_bits[0], 1, 4); + /* reassemble d-bits */ + i = 0; /* counts bits */ + j = 4; /* counts input bits */ + k = gsm_fr_map[0]-1; /* current number bit in element */ + l = 0; /* counts element bits */ + o = 0; /* offset output bits */ + while (i < 260) { + tf->d_bits[k+o] = (data[j/8] >> (7-(j%8))) & 1; + if (--k < 0) { + o += gsm_fr_map[l]; + k = gsm_fr_map[++l]-1; + } + i++; + j++; + } +} + +void trau_encode_efr(struct decoded_trau_frame *tf, + const unsigned char *data) +{ + int i, j; + ubit_t check_bits[26]; + + /* set c-bits and t-bits */ + tf->c_bits[0] = 1; + tf->c_bits[1] = 1; + tf->c_bits[2] = 0; + tf->c_bits[3] = 1; + tf->c_bits[4] = 0; + memset(&tf->c_bits[5], 0, 6); + memset(&tf->c_bits[11], 1, 10); + memset(&tf->t_bits[0], 1, 4); + /* reassemble d-bits */ + tf->d_bits[0] = 1; + for (i = 1, j = 4; i < 39; i++, j++) + tf->d_bits[i] = (data[j/8] >> (7-(j%8))) & 1; + efr_parity_bits_1(check_bits, tf->d_bits); + osmo_crc8gen_set_bits(&gsm0860_efr_crc3, check_bits, 26, + tf->d_bits + 39); + for (i = 42, j = 42; i < 95; i++, j++) + tf->d_bits[i] = (data[j/8] >> (7-(j%8))) & 1; + efr_parity_bits_2(check_bits, tf->d_bits); + osmo_crc8gen_set_bits(&gsm0860_efr_crc3, check_bits, 12, + tf->d_bits + 95); + for (i = 98, j = 95; i < 148; i++, j++) + tf->d_bits[i] = (data[j/8] >> (7-(j%8))) & 1; + efr_parity_bits_3(check_bits, tf->d_bits); + osmo_crc8gen_set_bits(&gsm0860_efr_crc3, check_bits, 8, + tf->d_bits + 148); + for (i = 151, j = 145; i < 204; i++, j++) + tf->d_bits[i] = (data[j/8] >> (7-(j%8))) & 1; + efr_parity_bits_4(check_bits, tf->d_bits); + osmo_crc8gen_set_bits(&gsm0860_efr_crc3, check_bits, 12, + tf->d_bits + 204); + for (i = 207, j = 198; i < 257; i++, j++) + tf->d_bits[i] = (data[j/8] >> (7-(j%8))) & 1; + efr_parity_bits_5(check_bits, tf->d_bits); + osmo_crc8gen_set_bits(&gsm0860_efr_crc3, check_bits, 8, + tf->d_bits + 257); +} + int trau_send_frame(struct gsm_lchan *lchan, struct gsm_data_frame *frame) { uint8_t trau_bits_out[TRAU_FRAME_BITS]; struct gsm_e1_subslot *dst_e1_ss = &lchan->ts->e1_link; struct subch_mux *mx; - int i, j, k, l, o; - unsigned char *data = frame->data; struct decoded_trau_frame tf; mx = e1inp_get_mux(dst_e1_ss->e1_nr, dst_e1_ss->e1_ts); @@ -291,30 +502,10 @@ int trau_send_frame(struct gsm_lchan *lchan, struct gsm_data_frame *frame) switch (frame->msg_type) { case GSM_TCHF_FRAME: - /* set c-bits and t-bits */ - tf.c_bits[0] = 1; - tf.c_bits[1] = 1; - tf.c_bits[2] = 1; - tf.c_bits[3] = 0; - tf.c_bits[4] = 0; - memset(&tf.c_bits[5], 0, 6); - memset(&tf.c_bits[11], 1, 10); - memset(&tf.t_bits[0], 1, 4); - /* reassemble d-bits */ - i = 0; /* counts bits */ - j = 4; /* counts input bits */ - k = gsm_fr_map[0]-1; /* current number bit in element */ - l = 0; /* counts element bits */ - o = 0; /* offset output bits */ - while (i < 260) { - tf.d_bits[k+o] = (data[j/8] >> (7-(j%8))) & 1; - if (--k < 0) { - o += gsm_fr_map[l]; - k = gsm_fr_map[++l]-1; - } - i++; - j++; - } + trau_encode_fr(&tf, frame->data); + break; + case GSM_TCHF_FRAME_EFR: + trau_encode_efr(&tf, frame->data); break; default: DEBUGPC(DLMUX, "unsupported message type %d\n", diff --git a/openbsc/tests/Makefile.am b/openbsc/tests/Makefile.am index 7f51bfa..d4bb954 100644 --- a/openbsc/tests/Makefile.am +++ b/openbsc/tests/Makefile.am @@ -1,4 +1,4 @@ -SUBDIRS = gsm0408 db channel mgcp gprs si abis gbproxy +SUBDIRS = gsm0408 db channel mgcp gprs si abis gbproxy trau if BUILD_NAT SUBDIRS += bsc-nat bsc-nat-trie diff --git a/openbsc/tests/testsuite.at b/openbsc/tests/testsuite.at index 76110f5..652cfe9 100644 --- a/openbsc/tests/testsuite.at +++ b/openbsc/tests/testsuite.at @@ -81,3 +81,9 @@ AT_KEYWORDS([gbproxy]) cat $abs_srcdir/gbproxy/gbproxy_test.ok > expout AT_CHECK([$abs_top_builddir/tests/gbproxy/gbproxy_test], [], [expout], [ignore]) AT_CLEANUP + +AT_SETUP([trau]) +AT_KEYWORDS([trau]) +cat $abs_srcdir/trau/trau_test.ok > expout +AT_CHECK([$abs_top_builddir/tests/trau/trau_test], [], [expout], [ignore]) +AT_CLEANUP diff --git a/openbsc/tests/trau/Makefile.am b/openbsc/tests/trau/Makefile.am new file mode 100644 index 0000000..d4aa1c3 --- /dev/null +++ b/openbsc/tests/trau/Makefile.am @@ -0,0 +1,17 @@ +AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include +AM_CFLAGS=-Wall -ggdb3 $(LIBOSMOCORE_CFLAGS) $(LIBOSMOGSM_CFLAGS) $(LIBOSMOABIS_CFLAGS) $(LIBSMPP34_CFLAGS) $(COVERAGE_CFLAGS) +AM_LDFLAGS = $(COVERAGE_LDFLAGS) + +EXTRA_DIST = trau_test.ok + +noinst_PROGRAMS = trau_test + +trau_test_SOURCES = trau_test.c +trau_test_LDADD = $(top_builddir)/src/libbsc/libbsc.a \ + $(top_builddir)/src/libmsc/libmsc.a \ + $(top_builddir)/src/libbsc/libbsc.a \ + $(top_builddir)/src/libtrau/libtrau.a \ + $(top_builddir)/src/libcommon/libcommon.a \ + $(LIBOSMOCORE_LIBS) $(LIBOSMOABIS_LIBS) \ + $(LIBOSMOGSM_LIBS) $(LIBSMPP34_LIBS) $(LIBOSMOVTY_LIBS) -ldl -ldbi + diff --git a/openbsc/tests/trau/trau_test.c b/openbsc/tests/trau/trau_test.c new file mode 100644 index 0000000..f8a48db --- /dev/null +++ b/openbsc/tests/trau/trau_test.c @@ -0,0 +1,82 @@ +/* (C) 2013 by Andreas Eversberg <jolly(a)eversberg.eu> + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <osmocom/abis/trau_frame.h> +#include <openbsc/trau_mux.h> +#include <osmocom/core/msgb.h> + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> + +void test_trau_fr_efr(unsigned char *data) +{ + struct decoded_trau_frame tf; + struct msgb *msg; + struct gsm_data_frame *frame; + + printf("Testing TRAU FR transcoding.\n"); + data[0] = 0xd0; + trau_encode_fr(&tf, data); + tf.c_bits[11] = 0; /* clear BFI */ + msg = trau_decode_fr(1, &tf); + OSMO_ASSERT(msg != NULL); + frame = (struct gsm_data_frame *)msg->data; + OSMO_ASSERT(frame->msg_type == GSM_TCHF_FRAME); + OSMO_ASSERT(!memcmp(frame->data, data, 33)); + msgb_free(msg); + + printf("Testing TRAU EFR transcoding.\n"); + data[0] = 0xc0; + trau_encode_efr(&tf, data); + OSMO_ASSERT(tf.d_bits[0] == 1); /* spare bit must be 1 */ + tf.c_bits[11] = 0; /* clear BFI */ + msg = trau_decode_efr(1, &tf); + OSMO_ASSERT(msg != NULL); + frame = (struct gsm_data_frame *)msg->data; + OSMO_ASSERT(frame->msg_type == GSM_TCHF_FRAME_EFR); + OSMO_ASSERT(!memcmp(frame->data, data, 31)); + + printf("Testing TRAU EFR decoding with CRC error.\n"); + tf.d_bits[0] = 0; /* spare bit must be included */ + msg = trau_decode_efr(1, &tf); + OSMO_ASSERT(msg != NULL); + frame = (struct gsm_data_frame *)msg->data; + OSMO_ASSERT(frame->msg_type == GSM_TCHF_BAD_FRAME); + msgb_free(msg); +} + +int main() +{ + unsigned char data[33]; + int i; + + memset(data, 0x00, sizeof(data)); + test_trau_fr_efr(data); + memset(data, 0xff, sizeof(data)); + test_trau_fr_efr(data); + srandom(42); + for (i = 0; i < sizeof(data); i++) + data[i] = random(); + test_trau_fr_efr(data); + printf("Done\n"); + return 0; +} + +/* stubs */ +void vty_out() {} -- 1.7.3.4

11 years, 7 months

[PATCH] contrib/rtp: Fix default payload case

by Jacob Erlbeck

There is the wrong record field selection being used to extract the default value. It returns the tuple offset instead of the value. This patch fixes this. Sponsored-by: On-Waves ehf --- openbsc/contrib/rtp/gen_rtp_header.erl | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/openbsc/contrib/rtp/gen_rtp_header.erl b/openbsc/contrib/rtp/gen_rtp_header.erl index 9f980b0..cc4c61c 100755 --- a/openbsc/contrib/rtp/gen_rtp_header.erl +++ b/openbsc/contrib/rtp/gen_rtp_header.erl @@ -45,7 +45,9 @@ main([First | RemArgs], Opts) -> InFile = proplists:get_value(file, Opts, undef), Payload = case {PayloadData, InFile} of - {undef, undef} -> #rtp_packet.payload; + {undef, undef} -> + % use default value + #rtp_packet{}#rtp_packet.payload; {P, undef} -> P; {_, File} -> log(info, "Loading file '~s'~n", [File], Opts), -- 1.7.9.5

11 years, 7 months

Failing SuperSIM (fakemagicsim) cards?

by Andrew Back

Has anyone experienced these cards (as can be found on eBay) failing after a matter of months? I have some I programmed ~1 year ago and which worked fine in a bunch of Calypso handsets with NITB, but now I get "SIM card absent" whenever I try to make a call (but LUR is accepted OK and can see programmed IMSI in NITB debug). An operator SIM and an R&S test SIM is working fine with the setup. Also tried reprogramming the SuperSIM card (command used below). Regards, Andrew // ./pySim-prog.py -d /dev/ttyUSB0 -n OpenBSC -c 44 -x 001 -y 01 -i 001010000000053 -s 1234567890000000003 -k DEADBEEF0C0FFEE0F00D013370D00F03 Insert card now (or CTRL-C to cancel) Autodetected card type fakemagicsim Generated card parameters : > Name : OpenBSC > SMSP : e1ffffffffffffffffffffffff058100445555ffffffffffff000000 > ICCID : 1234567890000000003 > MCC/MNC : 1/1 > IMSI : 001010000000053 > Ki : DEADBEEF0C0FFEE0F00D013370D00F03 > OPC : 56078bafca0ce95e81089288cbfb296e Programming ... Done ! -- Andrew Back http://carrierdetect.com

11 years, 7 months

nanoBTS reset procedure

by Pierre Kim

Hello, For those who use nanoBTS for OpenBSC, I made a short video about how to properly reset the nanoBTS when something goes wrong. In the video demonstrates how to manually shirt the TIB pins For 110 series (Oval Shaped) : http://www.youtube.com/watch?v=VjW2EAP7wss For 165 series (Rectangular) : http://www.youtube.com/watch?v=9H-H5J8XxOE And happy holidays to all Cheers, Pierre

11 years, 7 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC December 2013