Hello! when you look at http://openbsc.osmocom.org/trac/attachment/wiki/BS11_Configuration/bs11_conn...
you see that the second rx/TX-Ports are connected. Is this absolutly nesessary?
T.
this is only neccessary if you want to daisy-chain multiple bts in a molti-drop configuration.
"Thomas Ansorg" kobayashi_maru@onlinehome.de wrote:
Hello! when you look at http://openbsc.osmocom.org/trac/attachment/wiki/BS11_Configuration/bs11_conn...
you see that the second rx/TX-Ports are connected. Is this absolutly nesessary?
T.
-- Wer Rechtschreibfehler findet, darf sie behalten!
-- Sent from a mobile device, excuse my short response
Hi Thomas.
Hello! when you look at http://openbsc.osmocom.org/trac/attachment/wiki/BS11_Configuration/bs11_conn...
you see that the second rx/TX-Ports are connected. Is this absolutly nesessary?
No, you can leave the port unconnected. All setups (with a single BTS) i have seen yet are only connected through the first port.
But it would be interesting to know why the author of the picture has connected the TX and RX of port 2. This is the first time i see a setup that is connected that way.
regards. Philipp
-
dexter -
Harald Welte -
Thomas Ansorg