Ah,
perfect, because of that, that took soo long ;) Thank you in advance!
Are you attending to SIGINT?
Best regards Björn
Am 05.05.2009 um 09:33 schrieb Holger Adams:
Hello Bjoern,
Am Di, 5.05.2009, 08:59, schrieb Bjoern Heller:
So,
here is the console dump:
... Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=6) E1=(0,3,2) Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr (bts=0,trx=0,ts=7) Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=7) E1=(0,3,3) bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1 Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4) INST=(00,ff,ff) Failure Event Report Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4) INST=(00,ff,ff) STATE CHG:
The net wont become visible. Maybe it is related to this line?
Tue May 5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
Everythings looks fine. You have to wait up to 15 minutes until you can select the network w/ your mobile phone.
There's also a frequency stability problem (see the last dozen of posts here) which occours with the HFC-E1 card. With the current OpenBSC version you can switch the frequency reference to the internal quartz. We (Faculty of Com. Eng.) are building a GPS/DCF77 disciplined quartz reference for the HFC-E1 card at the moment where we hopefully get the required ~0.01PPM precision. Maybe it's finished until the 26c3.
Some mobile phones are also very choosy, just try another one.
Best Regards, Holger
-- | Holger Adams holger@kernreaktor.org | University of Applied Sciences Esslingen | Faculty of Communications Engineering
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Björn Heller Jabber: tec@jabber.hellercom.de