Hello Bjoern,

Am Di, 5.05.2009, 08:59, schrieb Bjoern Heller:

So,

here is the console dump:

...

Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF

Um=(bts=0,trx=0,ts=6) E1=(0,3,2)

Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr

(bts=0,trx=0,ts=7)

Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF

Um=(bts=0,trx=0,ts=7) E1=(0,3,3)

bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1

Tue May  5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)

INST=(00,ff,ff) Failure Event Report

Tue May  5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)

INST=(00,ff,ff) STATE CHG:

The net wont become visible.

Maybe it is related to this line?

Tue May  5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)

INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)

Everythings looks fine. You have to wait up to 15 minutes until you can
select the network w/ your mobile phone.

There's also a frequency stability  problem (see the last dozen of posts
here) which occours with the HFC-E1 card. With the current OpenBSC version
you can switch the frequency reference to the internal quartz. We
(Faculty of Com. Eng.) are building a GPS/DCF77 disciplined quartz
reference for the HFC-E1 card at the moment where we hopefully get the
required ~0.01PPM precision. Maybe it's finished until the 26c3.

Some mobile phones are also very choosy, just try another one.

Best Regards,
Holger

--
| Holger Adams <holger@kernreaktor.org>
| University of Applied Sciences Esslingen
| Faculty of Communications Engineering