5 May
2009
5 May
'09
12:55 a.m.
Hello,
I have an Issue related to my Debian OpenBSC.
Every time I fire up openbsc everything goes well like the btse
alignement/db alignement on lmt and there are no errors on lmt.
Only openBSC tells me after the initial state were the net should be
up, that the oc or some module(ill add more details later on today) is
"in test".
So this looks like the issue to me why the net wont come up.
But sometimes it works (sometimes it helps to restart the bts but it
wont help everytime).
Im a bit curious why the In test is appearing while lmt (the gui app)
tells me that everything is as it should be...
As far as I know this normally tells me that the object is in Test
mode and is checked because requested on lmt.
May this also be a timing issue on the abis link?
Im writing from iPhone in bed so enough for now.
I would be glad if someone could help/ has an idea.
By the way Ill be at SIGINT09 in Cologne helping out at the GSM
Workshop.
Who will be there too?
Best Regards
Björn Heller
5 May
5 May
8:59 a.m.
So,
here is the console dump:
./bsc_hack -f 123 -a -c 602 -n 01
Allowing everyone?
DB: Database initialized.
DB: Database prepared.
1 device found
id: 0
Dprotocols: 00000018
Bprotocols: 0000006e
protocol: 0
nrbchan: 30
name: hfc-e1.1
activate bchan
activate bchan
bootstrapping OML for BTS 0
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=0)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=1)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=1) E1=(0,2,1)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=2)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=2) E1=(0,2,2)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=3)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=3) E1=(0,2,3)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=4)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=4) E1=(0,3,0)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=5)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=5) E1=(0,3,1)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=6)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=7)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
Tue May 5 10:53:00 2009 <0020> abis_nm.c:674 OC=SITE MANAGER(00)
INST=(ff,ff,ff) Software Activated Report
bootstrapping OML for BTS 0
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=0)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=1)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=1) E1=(0,2,1)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=2) E1=(0,2,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=3)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=3) E1=(0,2,3)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=4)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=4) E1=(0,3,0)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=5)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=5) E1=(0,3,1)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=6)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=7)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
bootstrapping OML for BTS 0
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=0)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=1)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=1) E1=(0,2,1)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=2) E1=(0,2,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=3)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=3) E1=(0,2,3)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=4)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=4) E1=(0,3,0)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=5)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=5) E1=(0,3,1)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=6)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=7)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) Failure Event Report
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) STATE CHG:
The net wont become visible.
Maybe it is related to this line?
Tue May 5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
Best regards
Björn Heller
Am 05.05.2009 um 00:55 schrieb Bjoern Heller:
Hello,
I have an Issue related to my Debian OpenBSC.
Every time I fire up openbsc everything goes well like the btse
alignement/db alignement on lmt and there are no errors on lmt.
Only openBSC tells me after the initial state were the net should be
up, that the oc or some module(ill add more details later on today)
is "in test".
So this looks like the issue to me why the net wont come up.
But sometimes it works (sometimes it helps to restart the bts but it
wont help everytime).
Im a bit curious why the In test is appearing while lmt (the gui
app) tells me that everything is as it should be...
As far as I know this normally tells me that the object is in Test
mode and is checked because requested on lmt.
May this also be a timing issue on the abis link?
Im writing from iPhone in bed so enough for now.
I would be glad if someone could help/ has an idea.
By the way Ill be at SIGINT09 in Cologne helping out at the GSM
Workshop.
Who will be there too?
Best Regards
Björn Heller
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
9:33 a.m.
Hello Bjoern,
Am Di, 5.05.2009, 08:59, schrieb Bjoern Heller:
So,
here is the console dump:
...
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=7)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) Failure Event Report
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) STATE CHG:
The net wont become visible.
Maybe it is related to this line?
Tue May 5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
Everythings looks fine. You have to wait up to 15 minutes until you can
select the network w/ your mobile phone.
There's also a frequency stability problem (see the last dozen of posts
here) which occours with the HFC-E1 card. With the current OpenBSC version
you can switch the frequency reference to the internal quartz. We
(Faculty of Com. Eng.) are building a GPS/DCF77 disciplined quartz
reference for the HFC-E1 card at the moment where we hopefully get the
required ~0.01PPM precision. Maybe it's finished until the 26c3.
Some mobile phones are also very choosy, just try another one.
Best Regards,
Holger
--
| Holger Adams <holger(a)kernreaktor.org>
| University of Applied Sciences Esslingen
| Faculty of Communications Engineering
9:48 a.m.
Ah,
perfect, because of that, that took soo long ;)
Thank you in advance!
Are you attending to SIGINT?
Best regards
Björn
Am 05.05.2009 um 09:33 schrieb Holger Adams:
Hello Bjoern,
Am Di, 5.05.2009, 08:59, schrieb Bjoern Heller:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
So,
here is the console dump:
...
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=7)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) Failure Event Report
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) STATE CHG:
The net wont become visible.
Maybe it is related to this line?
Tue May 5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
Everythings looks fine. You have to wait up to 15 minutes until you
can
select the network w/ your mobile phone.
There's also a frequency stability problem (see the last dozen of
posts
here) which occours with the HFC-E1 card. With the current OpenBSC
version
you can switch the frequency reference to the internal quartz. We
(Faculty of Com. Eng.) are building a GPS/DCF77 disciplined quartz
reference for the HFC-E1 card at the moment where we hopefully get the
required ~0.01PPM precision. Maybe it's finished until the 26c3.
Some mobile phones are also very choosy, just try another one.
Best Regards,
Holger
--
| Holger Adams <holger(a)kernreaktor.org>
| University of Applied Sciences Esslingen
| Faculty of Communications Engineering
11:34 a.m.
Hello Bjoern,
Am Di, 5.05.2009, 09:48, schrieb Bjoern Heller:
Ah,
perfect, because of that, that took soo long ;)
Thank you in advance!
No Problem.
Are you attending to SIGINT?
No - Sorry. Even 26c3 isn't yet 100% sure (I still need a new working
contract, can't take holiday before that). But 25c3 was quite funny with
you down at the hackcenter :-P
Best Regards,
Holger
--
| Holger Adams <holger(a)kernreaktor.org>
| University of Applied Sciences Esslingen
| Faculty of Communications Engineering
5475
days inactive
5476
days old
4 comments
2 participants
participants (2)
-
Bjoern Heller -
Holger Adams