Re: nano3g 237A

Hi Paul,

depending on your firmware your device will either use bmis or tr069 as configuration.

If you have a tr069 firmware you can use this "simple" tr069 https://git.sysmocom.de/sysmocom/femto-acs to configure and connect to the osmo-hnbgw. Over the provisioning webui you can set the tr069 server.

So you would need to setup osmo-hnbgw, osmo-msc, osmo-mgw, osmo-sgsn, osmo-ggsn, osmo-hlr, osmo-stp. depending on your voice setup you would also need osmo-sip-connector to a pbx (e.g. asterisk, freeswitch, ..).

You should read https://osmocom.org/projects/cellular-infrastructure/wiki/Osmocom_Network_In... for further information.

Best, lynxis