Thank you so much. I’m going to give this a try.
<end transmission>
On Oct 26, 2021, at 15:29, Alexander 'lynxis'
Couzens <lynxis(a)fe80.eu> wrote:
Hi Paul,
depending on your firmware your device will either use bmis or tr069 as
configuration.
If you have a tr069 firmware you can use this "simple" tr069
https://git.sysmocom.de/sysmocom/femto-acs to configure and connect to
the osmo-hnbgw.
Over the provisioning webui you can set the tr069 server.
So you would need to setup osmo-hnbgw, osmo-msc, osmo-mgw, osmo-sgsn,
osmo-ggsn, osmo-hlr, osmo-stp. depending on your voice setup you would
also need osmo-sip-connector to a pbx (e.g. asterisk, freeswitch, ..).
You should read
https://osmocom.org/projects/cellular-infrastructure/wiki/Osmocom_Network_I…
for further information.
Best,
lynxis
--
Alexander Couzens
mail: lynxis(a)fe80.eu
jabber: lynxis(a)fe80.eu
gpg: 390D CF78 8BF9 AA50 4F8F F1E2 C29E 9DA6 A0DF 8604