28 Apr
2009
28 Apr
'09
6:31 p.m.
On Fri, Apr 17, 2009 at 08:07:44PM +0200, Dieter Spaar wrote:
I have created a patch for bs11_config to emit those two messages. It's
attached to this mail, but I haven't had time to test it yet.
However, since it doesn't change any common code paths, I have committed it.
It would be great if somebody could do some testing if this actually works.
Regards,
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
We could add
this setting to the bs11_config program so people can try if
their E1 clock or their [10 years uncalibrated] BS11 internal oscillator is
better.
I did a quick test with this setting and it seems to work fine
with the BS-11 (so we should not believe the documentation ;-).
Here is the LMT dump for the PLL Mode, it can be changed during
normal operation:
; Locked
Tx D0A5070000FC0102
Rx D1A5070000FC0102
; Standalone
Tx D0A5070000FC0103
Rx D1A5070000FC0103