5 May
2009
5 May
'09
9:33 a.m.
Hello Bjoern,
Am Di, 5.05.2009, 08:59, schrieb Bjoern Heller:
So,
here is the console dump:
...
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr
(bts=0,trx=0,ts=7)
Tue May 5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) Failure Event Report
Tue May 5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)
INST=(00,ff,ff) STATE CHG:
The net wont become visible.
Maybe it is related to this line?
Tue May 5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
Everythings looks fine. You have to wait up to 15 minutes until you can
select the network w/ your mobile phone.
There's also a frequency stability problem (see the last dozen of posts
here) which occours with the HFC-E1 card. With the current OpenBSC version
you can switch the frequency reference to the internal quartz. We
(Faculty of Com. Eng.) are building a GPS/DCF77 disciplined quartz
reference for the HFC-E1 card at the moment where we hopefully get the
required ~0.01PPM precision. Maybe it's finished until the 26c3.
Some mobile phones are also very choosy, just try another one.
Best Regards,
Holger
--
| Holger Adams <holger(a)kernreaktor.org>
| University of Applied Sciences Esslingen
| Faculty of Communications Engineering