OpenBSC

openbsc@lists.osmocom.org

13 participants
4278 discussions

PRACH fails
by Sipos Csaba 09 Sep '16

09 Sep '16

Dear Tom and List, I am in the process of updating the wiki for USRP radios, therefor I am recompiling everything Osmocom related with the latest master branches. I managed to setup the system, the CS services are working just fine (only fullrate and SMS is tested yet), but the GPRS service seems to be not working. I am using my well tested setup on 1800MHz (ARFCN 885), with duplex filters. On the Osmo-BTS end I get this message: <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access <0007> l1sap.c:957 RACH for packet access Osmo-PCU in the same time shows the following (repeatedly): Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:819 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) timer 3169 expired. Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:893 - Assignment was on CCCH Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:899 - No uplink data received yet Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:879 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) will be freed due to timeout Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:334 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) free Thu Sep 8 12:48:30 2016 DRLCMAC <0002> bts.cpp:1501 PDCH(TS 6, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN), 0 TBFs, USFs = 00, TFIs = 00000000. Thu Sep 8 12:48:30 2016 DRLCMAC <0002> gprs_ms.cpp:323 Detaching TBF from MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) Thu Sep 8 12:48:30 2016 DRLCMAC <0002> gprs_ms.cpp:140 Destroying MS object, TLLI = 0x00000000 Thu Sep 8 12:48:30 2016 DRLCMAC <0002> tbf.cpp:355 ********** TBF ends here ********** Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:486 MS requests UL TBF on RACH, so we provide one: Thu Sep 8 12:48:31 2016 DRLCMAC <0002> tbf.cpp:672 ********** TBF starts here ********** Thu Sep 8 12:48:31 2016 DRLCMAC <0002> tbf.cpp:674 Allocating UL TBF: MS_CLASS=0/0 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_ms.cpp:114 Creating MS object, TLLI = 0x00000000 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:413 Searching for first unallocated TFI: TRX=0 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:423 Found TFI=0. Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:525 Slot Allocation (Algorithm B) for unknown class (assuming 12) Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:560 - Rx=4 Tx=4 Sum Rx+Tx=5 Tta=2 Ttb=1 Tra=2 Trb=1 Type=1 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 0, because not enabled Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 1, because not enabled Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 2, because not enabled Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 3, because not enabled Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:579 - Possible DL/UL slots: (TS=0)"....CCCC"(TS=7) Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:940 - Selected UL slots: (TS=0)"......U."(TS=7), single Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:966 Using single slot at TS 6 for UL Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:990 - Reserved DL/UL slots: (TS=0)"......C."(TS=7) Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:1017 - Assigning UL TS 6 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:1481 PDCH(TS 6, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001. Thu Sep 8 12:48:31 2016 DRLCMAC <0002> tbf.cpp:385 - Setting Control TS 6 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> gprs_ms.cpp:267 Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Thu Sep 8 12:48:31 2016 DRLCMAC <0002> tbf.cpp:625 Allocated TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL): trx = 0, ul_slots = 40, dl_slots = 00 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:291 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW Thu Sep 8 12:48:31 2016 DRLCMAC <0002> tbf.cpp:409 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer 3169. Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:530 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:534 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=0 ra=0x78, Fn=1011875 (27,35,7) Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:536 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH) Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:549 - TRX=0 (885) TS=6 TA=0 TSC=7 TFI=0 USF=0 Thu Sep 8 12:48:31 2016 DRLCMAC <0002> bts.cpp:291 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) changes state from FLOW to WAIT ASSIGN Thu Sep 8 12:48:33 2016 DBSSGP <0009> gprs_bssgp_pcu.cpp:792 Sending flow control info on BVCI 2 Thu Sep 8 12:48:33 2016 DBSSGP <0009> gprs_bssgp_pcu.cpp:705 Computed BVC leak rate = 10000, num_pdch = 4, cs = CS-4 Thu Sep 8 12:48:33 2016 DBSSGP <0009> gprs_bssgp_pcu.cpp:729 Computed MS default leak rate = 10000, ms_num_pdch = 4, cs = CS-4 Thu Sep 8 12:48:33 2016 DBSSGP <0009> gprs_bssgp_pcu.cpp:758 Sending FLOW CONTROL BVC, Bmax = 100000, R = 10000, Bmax_MS = 100000, R_MS = 10000, avg_dly = 0 Thu Sep 8 12:48:33 2016 DBSSGP <0009> gprs_bssgp_pcu.cpp:385 rx BVCI_PTP gprs_bssgp_rx_ptp Thu Sep 8 12:48:33 2016 DBSSGP <0009> gprs_bssgp_pcu.cpp:245 rx BSSGP_PDUT_FLOW_CONTROL_BVC_ACK Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:819 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) timer 3169 expired. Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:893 - Assignment was on CCCH Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:899 - No uplink data received yet Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:879 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) will be freed due to timeout Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:334 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) free Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:1501 PDCH(TS 6, TRX 0): Detaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN), 0 TBFs, USFs = 00, TFIs = 00000000. Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_ms.cpp:323 Detaching TBF from MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_ms.cpp:140 Destroying MS object, TLLI = 0x00000000 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:355 ********** TBF ends here ********** Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:486 MS requests UL TBF on RACH, so we provide one: Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:672 ********** TBF starts here ********** Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:674 Allocating UL TBF: MS_CLASS=0/0 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_ms.cpp:114 Creating MS object, TLLI = 0x00000000 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:413 Searching for first unallocated TFI: TRX=0 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:423 Found TFI=0. Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:525 Slot Allocation (Algorithm B) for unknown class (assuming 12) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:560 - Rx=4 Tx=4 Sum Rx+Tx=5 Tta=2 Ttb=1 Tra=2 Trb=1 Type=1 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 0, because not enabled Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 1, because not enabled Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 2, because not enabled Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:157 - Skipping TS 3, because not enabled Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:579 - Possible DL/UL slots: (TS=0)"....CCCC"(TS=7) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:940 - Selected UL slots: (TS=0)"......U."(TS=7), single Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:966 Using single slot at TS 6 for UL Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:990 - Reserved DL/UL slots: (TS=0)"......C."(TS=7) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_rlcmac_ts_alloc.cpp:1017 - Assigning UL TS 6 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:1481 PDCH(TS 6, TRX 0): Attaching TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL), 1 TBFs, USFs = 01, TFIs = 00000001. Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:385 - Setting Control TS 6 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> gprs_ms.cpp:267 Attaching TBF to MS object, TLLI = 0x00000000, TBF = TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:625 Allocated TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL): trx = 0, ul_slots = 40, dl_slots = 00 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:291 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=NULL) changes state from NULL to FLOW Thu Sep 8 12:48:36 2016 DRLCMAC <0002> tbf.cpp:409 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) starting timer 3169. Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:530 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) [UPLINK] START Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:534 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) RX: [PCU <- BTS] RACH qbit-ta=0 ra=0x79, Fn=1013049 (27,36,11) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:536 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) TX: START Immediate Assignment Uplink (AGCH) Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:549 - TRX=0 (885) TS=6 TA=0 TSC=7 TFI=0 USF=0 Thu Sep 8 12:48:36 2016 DRLCMAC <0002> bts.cpp:291 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=FLOW) changes state from FLOW to WAIT ASSIGN Thu Sep 8 12:48:41 2016 DRLCMAC <0002> tbf.cpp:819 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) timer 3169 expired. Thu Sep 8 12:48:41 2016 DRLCMAC <0002> tbf.cpp:874 TBF(TFI=0 TLLI=0x00000000 DIR=UL STATE=WAIT ASSIGN) T3169 timeout during transsmission The SGSN and GGSN logs are empty. The RX gain is on 5dB, the UHD version is 3.10.0-release. Only GPRS is allowed so far on 4 PDCHs. Osmo-TRX is started with default set: Config Settings Log Level............... NOTICE Device args............. TRX Base Port........... 5700 TRX Address............. 127.0.0.1 Channels................ 1 Tx Samples-per-Symbol... 4 Rx Samples-per-Symbol... 1 EDGE support............ Disabled Reference............... Internal C0 Filler Table......... Disabled Multi-Carrier........... Disabled Diversity............... Disabled Tuning offset........... 0 RSSI to dBm offset...... 0 Swap channels........... 0 The CS call and SMS are both working fine, the audio quality is quite good. Can someone give me a hint where this goes wrong? From what I see the PRACH is failing to succeed. Regards, Csaba

3 5

octasic build failure / header versions
by Neels Hofmeyr 09 Sep '16

09 Sep '16

Yesterday we had problems building the current osmo-bts-octphy with the current octphy-2g-headers. To resolve, we've reverted two commits and added a change in osmo-bts. (1) osmo-bts included a struct member not present anywhere in octphy-2g-headers. https://gerrit.osmocom.org/820 https://gerrit.osmocom.org/821 On our test setup at sysmocom, I found a version of the headers called OCTSDR-2G-02.05.00-B780-DEBUG that includes this struct member, but those headers have proprietary licensing. Also, the current version apparently is 2.07, while the one with the unknown struct header seems to be older: 2.05. So it looks like the usCentreArfcn item has been removed in a newer version, even though it looks really useful to me. It would be good to resolve this confusion, probably as soon as Max is back from vacation (Max is the author of the reverted commits). (2) In the most recent version, a #define naming has changed. In https://gerrit.osmocom.org/822 Holger asks: > Do we have any precedence of using #if for version checks? You can > use #ifdef for both of them to support old and new headers? We could use a check like #if cOCTVC1_HW_VERSION_MAJOR <=2 && cOCTVC1_HW_VERSION_MINOR < 7 [...]_IDLE[...] #else [...]_UNUSED[...] #endif but I doubt that we will want to go back to old headers. If I'm the only one in doubt, we'd have a check like above in three places in osmo-bts. Thanks for your opinions, ~Neels -- - Neels Hofmeyr <nhofmeyr(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte

2 2

chan_alloc.c help
by Abdulghafar Shabaneh 06 Sep '16

06 Sep '16

Hi Neels and everyone in the list, Thanks for your help in installing OpenBSc on my Raspberry Pi :) It was as you said that I should delete it and build from scratch. The prefix command fixed the issue as well ./configure --prefix=/usr .. I was unable to install lcr due to an error: Makefile:1306: recipe for target 'chan_lcr.po' failed I don't know if that will fix the problem, though, its optional, and osmo-nitb should do the job by it self. Now I ran the osmo-nitb, osmo-bts-trx and osmo-trx all together with the USRP2 with FLEX900 daughter board GSM900 band, it all works well except the mobile is not able to register on the network. osmo-nitb shows this error: (towards the end) my file >trybsc.cfg contains this: ! password foo ! line vty no login ! e1_input e1_line 0 driver ipa network network country code 416 mobile network code 77 short name GSMab long name GSMab auth policy accept-all location updating reject cause 13 encryption a5 0 neci 1 paging any use tch 0 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3101 10 timer t3103 0 timer t3105 0 timer t3107 0 timer t3109 0 timer t3111 0 timer t3113 60 timer t3115 0 timer t3117 0 timer t3119 0 timer t3122 10 timer t3141 0 dtx-used 0 subscriber-keep-in-ram 0 bts 0 type sysmobts band GSM900 cell_identity 0 location_area_code 1 training_sequence_code 7 base_station_id_code 63 ms max power 0 cell reselection hysteresis 4 rxlev access min 0 periodic location update 30 channel allocator descending rach tx integer 9 rach max transmission 7 ! channel-descrption attach 1 ! channel-descrption bs-pa-mfrms 5 ! channel-descrption bs-ag-blks-res 1 ip.access unit_id 1801 0 oml ip.access stream_id 255 line 0 neighbor-list mode automatic trx 0 rf_locked 0 arfcn 100 nominal power 0 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 pi@dwarfabd:~ $ sudo osmo-nitb -c ~/trybsc.cfg -l hlr.sqlite3 -P -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM <0005> bsc_init.c:498 VTY at 127.0.0.1 4242 <0005> bsc_init.c:427 WARNING: You are running an 'accept-all' network on a BTS that is not barred. This configuration is likely to interfere with production GSM networks and should only be used in a RF shielded environment such as a faraday cage! <0005> bsc_hack.c:318 CTRL at 127.0.0.1 4249 DB: Database initialized. DB: Database prepared. <0005> abis_nm.c:316 OC=SITE-MANAGER(00) INST=(ff,ff,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:1768 OC=SITE-MANAGER(00) INST=(ff,ff,ff) Sending OPSTART <0005> abis_nm.c:316 OC=BTS(01) INST=(00,ff,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05) <0005> abis_nm.c:1449 Set BTS Attr (bts=0) <0005> abis_nm.c:1768 OC=BTS(01) INST=(00,ff,ff) Sending OPSTART <0005> abis_nm.c:316 OC=GPRS-NSE(f0) INST=(00,ff,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05) <0005> abis_nm.c:316 OC=GPRS-CELL(f1) INST=(00,ff,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05) <0005> abis_nm.c:316 OC=GPRS-NSVC(f2) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05) <0005> abis_nm.c:316 OC=GPRS-NSVC(f2) INST=(00,01,ff) STATE CHG: OP_STATE=Disabled AVAIL=Off line(03) <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=NULL AVAIL=Power off(02) <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=OK(ff) <0005> abis_nm.c:1768 OC=RADIO-CARRIER(02) INST=(00,00,ff) Sending OPSTART <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=OK(ff) <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) Software Activated Report <0005> abis_nm.c:1466 Set TRX Attr (bts=0,trx=0) <0005> abis_nm.c:1768 OC=RADIO-CARRIER(02) INST=(00,00,ff) Sending OPSTART <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) Software Activated Report <0005> abis_nm.c:1768 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) Sending OPSTART <0005> abis_nm.c:2587 ip.access RSL CONNECT IP=0.0.0.0 PORT=3003 STREAM=0x00 <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=0) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,00) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=1) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,01) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=2) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,02) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=3) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,03) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=4) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,04) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=5) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,05) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=6) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,06) Sending OPSTART <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05) <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=7) <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,07) Sending OPSTART <0005> abis_nm.c:316 OC=BTS(01) INST=(00,ff,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:2429 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) IPACCESS(0xe1): RSL CONNECT ACK <0004> bsc_init.c:287 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 100 using MCC=416 MNC=77 LAC=1 CID=0 BSIC=63 <0003> system_information.c:525 Serving cell: 100 <0003> bsc_init.c:104 SI1: 55 06 19 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b <0003> bsc_init.c:104 SI2: 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00 <0003> bsc_init.c:104 SI3: 49 06 1b 00 00 14 f6 77 00 01 49 03 05 27 53 40 e5 04 00 39 2b 2b 2b <0003> bsc_init.c:104 SI4: 31 06 1c 14 f6 77 00 01 53 40 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b <0003> bsc_init.c:104 SI5: 49 06 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b <0003> bsc_init.c:104 SI6: 2d 06 1e 00 00 14 f6 77 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff) <0000> chan_alloc.c:367 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Allocating lchan=0 as SDCCH <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=0,ss=0) Activating ARFCN(100) SS(0) lctype SDCCH r=LOCATION_UPDATE ra=0x0b ta=3 <0004> abis_rsl.c:539 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Tx RSL Channel Activate with act_type=INITIAL <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state NONE -> ACTIVATION REQUESTED <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=0,ss=0) CHANNEL ACTIVATE ACK <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state ACTIVATION REQUESTED -> ACTIVE <0000> chan_alloc.c:367 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Allocating lchan=1 as SDCCH <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=0,ss=1) Activating ARFCN(100) SS(1) lctype SDCCH r=OTHER ra=0x1f ta=2 <0004> abis_rsl.c:539 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Tx RSL Channel Activate with act_type=INITIAL <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state NONE -> ACTIVATION REQUESTED <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=0,ss=1) CHANNEL ACTIVATE ACK <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state ACTIVATION REQUESTED -> ACTIVE <0004> abis_rsl.c:772 (bts=0,trx=0,ts=0,ss=0) RF Channel Release CMD due error 1 <0004> abis_rsl.c:721 (bts=0,trx=0,ts=0,ss=0) DEACTivate SACCH CMD <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state ACTIVE -> RELEASE DUE ERROR <0004> abis_rsl.c:830 (bts=0,trx=0,ts=0,ss=0) RF CHANNEL RELEASE ACK <0004> abis_rsl.c:736 (bts=0,trx=0,ts=0,ss=0) is back in operation. <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state RELEASE DUE ERROR -> NONE <0004> abis_rsl.c:772 (bts=0,trx=0,ts=0,ss=1) RF Channel Release CMD due error 1 <0004> abis_rsl.c:721 (bts=0,trx=0,ts=0,ss=1) DEACTivate SACCH CMD <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state ACTIVE -> RELEASE DUE ERROR <0004> abis_rsl.c:830 (bts=0,trx=0,ts=0,ss=1) RF CHANNEL RELEASE ACK <0004> abis_rsl.c:736 (bts=0,trx=0,ts=0,ss=1) is back in operation. <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state RELEASE DUE ERROR -> NONE <0000> chan_alloc.c:367 (bts=0,trx=0,ts=7,pchan=TCH/F) Allocating lchan=0 as TCH_F <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=7,ss=0) Activating ARFCN(100) SS(0) lctype TCH_F r=PAGING ra=0x37 ta=0 <0004> abis_rsl.c:539 (bts=0,trx=0,ts=7,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVATION REQUESTED <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=7,ss=0) CHANNEL ACTIVATE ACK <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVATION REQUESTED -> ACTIVE <0004> abis_rsl.c:772 (bts=0,trx=0,ts=7,ss=0) RF Channel Release CMD due error 1 <0004> abis_rsl.c:721 (bts=0,trx=0,ts=7,ss=0) DEACTivate SACCH CMD <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVE -> RELEASE DUE ERROR <0004> abis_rsl.c:830 (bts=0,trx=0,ts=7,ss=0) RF CHANNEL RELEASE ACK <0004> abis_rsl.c:736 (bts=0,trx=0,ts=7,ss=0) is back in operation. <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state RELEASE DUE ERROR -> NONE <0000> chan_alloc.c:367 (bts=0,trx=0,ts=7,pchan=TCH/F) Allocating lchan=0 as TCH_F <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=7,ss=0) Activating ARFCN(100) SS(0) lctype TCH_F r=CALL ra=0xc4 ta=5 <0004> abis_rsl.c:539 (bts=0,trx=0,ts=7,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVATION REQUESTED <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=7,ss=0) CHANNEL ACTIVATE ACK <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVATION REQUESTED -> ACTIVE <0004> abis_rsl.c:772 (bts=0,trx=0,ts=7,ss=0) RF Channel Release CMD due error 1 <0004> abis_rsl.c:721 (bts=0,trx=0,ts=7,ss=0) DEACTivate SACCH CMD <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVE -> RELEASE DUE ERROR <0004> abis_rsl.c:830 (bts=0,trx=0,ts=7,ss=0) RF CHANNEL RELEASE ACK <0004> abis_rsl.c:736 (bts=0,trx=0,ts=7,ss=0) is back in operation. <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state RELEASE DUE ERROR -> NONE <0000> chan_alloc.c:367 (bts=0,trx=0,ts=7,pchan=TCH/F) Allocating lchan=0 as TCH_F <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=7,ss=0) Activating ARFCN(100) SS(0) lctype TCH_F r=OTHER ra=0x51 ta=1 <0004> abis_rsl.c:539 (bts=0,trx=0,ts=7,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVATION REQUESTED <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=7,ss=0) CHANNEL ACTIVATE ACK <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVATION REQUESTED -> ACTIVE <0004> abis_rsl.c:772 (bts=0,trx=0,ts=7,ss=0) RF Channel Release CMD due error 1 <0004> abis_rsl.c:721 (bts=0,trx=0,ts=7,ss=0) DEACTivate SACCH CMD <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVE -> RELEASE DUE ERROR <0004> abis_rsl.c:830 (bts=0,trx=0,ts=7,ss=0) RF CHANNEL RELEASE ACK <0004> abis_rsl.c:736 (bts=0,trx=0,ts=7,ss=0) is back in operation. <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state RELEASE DUE ERROR -> NONE ************************************************************************************************************************************************ ************************************************************************************************************************************************ Part of osmo-bts-trx output: :375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611408 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611412 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611412 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1611449 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1611449 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611453 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611453 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611459 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611459 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611463 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611463 ts=0 trx=0 9 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613809 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1613846 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1613846 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613850 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613850 ts=0 trx=0 7 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616247 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616253 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616253 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616257 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616257 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1616294 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1616294 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616298 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616298 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616304 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616304 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616308 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616308 ts=0 trx=0 <0006> scheduler_trx.c:1517 GSM clock jitter: -2556 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613856 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613856 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613860 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613860 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1613897 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1613897 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613901 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613901 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613907 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613907 ts=0 trx=0 <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613911 ts=0 trx=0 <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613911 ts=0 trx=0 Thanks Abdulghafar

3 3

OsmoBTS -> libosmogsm code migration
by Vadim Yanitskiy 06 Sep '16

06 Sep '16

Dear all, We recently discussed with Harald, that there is a lot of code related to GSM L1 should be migrated from OsmoBTS to libosmogsm. The reason is that it would be better to have one shared implementation of the convolutional codes, mapping, interleaving, etc., because then in near future it can be used not only from OsmoBTS, but also from OsmocomBB and even from foreign projects, such as GR-GSM. I just started to work on this direction, and found that there is already some code, related to the conventional codes, in libosmogsm. But unlike OsmoBTS, where all the tables can be found within the single file named 'gsm0503_conv.c', these tables appears in separate files during building process. So, I have several questions: 1) Which approach is better to use? To store everything in a single file or to use auto generation (utils/conv_gen.py)? 2) What about the copyright? I have not seen any license/author info at the top pf these files. Who is the author? Also, there is the 'gsm0503_coding.c' file, which uses the following external dependences: * The DL1C logging category, which isn't defined in libosmocore; * The 'osmo-bts/gsm_data.h', which includes 'openbsc/gsm_data_shared.h' as well. So, there is regarding questions: 3) Which logging category it would be better to use after migration? 4) What to do with the 'osmo-bts/gsm_data.h'? 5) I don't think, that it's a good way to require something from the OpenBSC sources during OsmoBTS build... How can we change it? With best regards, Vadim Yanitskiy.

4 4

osmo-sip-connector codecs
by Anonim Stefan 31 Aug '16

31 Aug '16

Hi, Is there a way to make osmo-sip-connector advertise additional codecs (e.g.G711) besides GSM codec? Thanks, Stefan

2 1

Re: Error compiling libosmocore under Mac Osx
by Neels Hofmeyr 31 Aug '16

31 Aug '16

On Wed, Jul 13, 2016 at 07:42:39PM +0200, Juan Antonio Barea Lopez wrote: > Well, the commands i used were: > ./configure --disable-pcsc (this is for not installing the chipcard library Hi Juan, today a patch for Mac OSX showed up that looks like it fixes exactly your problem: https://gerrit.osmocom.org/#/c/802/1/src/codec/Makefile.am It will probably be merged to master soon, but until then you could fix up that line in you Makefile.am manually. ~Neels -- - Neels Hofmeyr <nhofmeyr(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte

1 0

BS11 Outdoor casing
by Alexander Huemer 29 Aug '16

29 Aug '16

Hi, I have a Siemens BS11 outdoor casing lying around, still in the original box that is taking up space. It is available free of charge, shipping costs have to paid though. In case you are interested, contact me. First come, first serve. It will otherwise be thrown away coming Friday. Kind regards, -Alex

1 0

gerrit patch verification vs. rebase upon submission
by Neels Hofmeyr 29 Aug '16

29 Aug '16

Hi all, I've expected this before and now it has actually happened: a patch that was verified by jenkins caused a build failure after being merged by gerrit. Let's be aware of the possibility of this happening: Commit [1] changed the rcv_rach() signature and correctly fixed all callers. Commit [2] added a new caller of rcv_rach(), with the correct, old arguments. Both tested successfully on their own, and were accepted for merge. [2] was merged first, thus [1] no longer edited all callers as would have been necessary. One way to catch this: gerrit could run another jenkins build every time when we hit the Submit button and 'master' has already moved on. Not sure if this is easily achievable. The other way to catch this are the regular (non-gerrit) jenkins builds on http://jenkins.osmocom.org/jenkins . Maybe selected jobs could send failure reports to the noisy gerrit mailing list... Another way we would see this is as soon as another patch is rebased onto master, or when testing locally, obviously. Thanks for your attention, ~Neels [1] "Change interface in osmo-pcu for 11 bit RACH" 959d1dee67e1c6fcfc57b347be2fb7a2ed099b2d [2] "EGPRS: PUAN encoding: add test case to show wrong urbb_len issue" 02352b487ac6808b6adb8e8623f0921aad7f02d7 -- - Neels Hofmeyr <nhofmeyr(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte

2 1

openBSC OTA
by sami 26 Aug '16

26 Aug '16

Hi, Does openbsc support OTA messages? Is there any documentation about this subject ?

3 9

Silent call
by sami 18 Aug '16

18 Aug '16

Dear all, Does the Silent-call feature provide the same features of testcall from openbts ? Is there a way to use the fuzzer code with it ? Best regards, Sami,

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC