OpenBSC

openbsc@lists.osmocom.org

4 participants
4156 discussions

osmo-nitb + osmo-sip-connector: background noise on peer to peer calls

by Anonim Stefan

Hi, I am using osmo-nitb + osmo-sip-connector and nanoBTS to establish a per to peer call. I am using: osmocom-nitb 0.15.1.20161024 osmo-sip-connector 1.20161024 While in call, I hear an annoying background noise while not talking. The noise disappears when someone speaks. Any idea what might be causing this and how this can be fixed? Thanks, Stefan

8 years, 8 months

Osmo BTS Multi Carrier activation with 1 TRX

by Dhananjay kumar

Hi All, We are trying to configure Multi carrier [ 2 or more ARFCN working in parallel with 1 TRX] with B200 board. If anyone has done it ,please share working config file and executing command for BTS and TRX. Thanks in advance ! -- Thanks & Regards Dhananjay

8 years, 8 months

estimate distance

by sami

Hi, Is there a function in OpenBSC that can help in estimating the diastase of the connected phone ? For example, something that gives the value of the power received by the phone from the BTS and the power received by the BTS from the phone (during paging or active call). best regards,

8 years, 8 months

P*CH activation

by Max

HI. Pardon the cross-posting, I'm not sure where this question really belongs. I've been trying to wrap my head around how PDTCH/PACCH/PTCCH activation works. In osmo-bts-sysmo/oml.c there is pdtch_sapis[] which defines what got to be activated both in DL and UL directions. Right now it's PDTCH (UL & DL), PTCCH (DL) and PRACH. Note that PACCH (DL) and PTCCH (UL) are commented out. Yet I see code dealing with PACCH in osmo-pcu and corresponding log messages. So the question is - how does this works? The PACCH seems to be used so it's somehow activated but apparently not the same way as PDTCH. -- Max Suraev <msuraev(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte

8 years, 8 months

Re: [MERGED] openbsc[master]: gsm0408: Adding log output for 3g specific RR messages

by Neels Hofmeyr

Possible error in this merged patch, see inline: On Tue, Nov 01, 2016 at 09:56:24PM +0000, Harald Welte wrote: > Harald Welte has submitted this change and it was merged. > > Change subject: gsm0408: Adding log output for 3g specific RR messages > ...................................................................... > > > gsm0408: Adding log output for 3g specific RR messages > > GSM 04.18, which is the successor of GSM 04.08, describes > additional RR 3g specific message types. This commit adds > log output for those messages. The behaviour is not changed > all affected message types are still forwared to the MSC > as they were before. > > See also 3GPP TS 04.18, section 10.4, table 10.4.1 > > The change requires to update libosmocore as well, see > also commit f48fdb3a108da0dc23d7af4ac021e98e11f07152 in > libosmocore.git for details. > > Change-Id: I41f2242fdf59c3eb4b3f8f7f003c17f7e0df01aa > --- > M openbsc/src/libbsc/bsc_api.c > M openbsc/src/libmsc/gsm_04_08.c > 2 files changed, 11 insertions(+), 7 deletions(-) > > Approvals: > Harald Welte: Looks good to me, approved > Jenkins Builder: Verified > > > > diff --git a/openbsc/src/libbsc/bsc_api.c b/openbsc/src/libbsc/bsc_api.c > index cc12e9f..207e12a 100644 > --- a/openbsc/src/libbsc/bsc_api.c > +++ b/openbsc/src/libbsc/bsc_api.c > @@ -34,6 +34,7 @@ > #include <openbsc/trau_mux.h> > > #include <osmocom/gsm/protocol/gsm_08_08.h> > +#include <osmocom/gsm/gsm48.h> > > #include <osmocom/core/talloc.h> > > @@ -587,11 +588,13 @@ > case GSM48_PDISC_RR: > switch (msg_type) { > case GSM48_MT_RR_GPRS_SUSP_REQ: > - DEBUGP(DRR, "GRPS SUSPEND REQUEST\n"); > + DEBUGP(DRR, "%s\n", > + gsm48_rr_msg_name(GSM48_MT_RR_GPRS_SUSP_REQ)); > break; > case GSM48_MT_RR_STATUS: > - LOGP(DRR, LOGL_NOTICE, "RR STATUS (cause: %s)\n", > - rr_cause_name(gh->data[0])); > + LOGP(DRR, LOGL_NOTICE, "%s (cause: %s)\n", > + gsm48_rr_msg_name(GSM48_MT_RR_GPRS_SUSP_REQ), Although this is in case GSM48_MT_RR_STATUS, it logs GSM48_MT_RR_GPRS_SUSP_REQ. I'd prefer it it logs gsm48_rr_msg_name(msg_type), also in the call above, and like the patch does below. > + rr_cause_name(gh->data[0])); > break; > case GSM48_MT_RR_MEAS_REP: > /* This shouldn't actually end up here, as RSL treats > @@ -643,8 +646,9 @@ > /* Normally, a MSC should never receive RR > * messages, but we'd rather forward what we > * don't know than drop it... */ > - LOGP(DRR, LOGL_NOTICE, "BSC: Passing unknown 04.08 " > - "RR message type 0x%02x to MSC\n", msg_type); > + LOGP(DRR, LOGL_NOTICE, > + "BSC: Passing %s 04.08 RR message to MSC\n", > + gsm48_rr_msg_name(msg_type)); > if (api->dtap) > api->dtap(conn, link_id, msg); > } > diff --git a/openbsc/src/libmsc/gsm_04_08.c b/openbsc/src/libmsc/gsm_04_08.c > index a22e3c2..3e362fa 100644 > --- a/openbsc/src/libmsc/gsm_04_08.c > +++ b/openbsc/src/libmsc/gsm_04_08.c > @@ -1270,8 +1270,8 @@ > rc = gsm48_rx_rr_app_info(conn, msg); > break; > default: > - LOGP(DRR, LOGL_NOTICE, "MSC: Unimplemented " > - "GSM 04.08 RR msg type 0x%02x\n", gh->msg_type); > + LOGP(DRR, LOGL_NOTICE, "MSC: Unimplemented %s GSM 04.08 RR " > + "message\n", gsm48_rr_msg_name(gh->msg_type)); > break; > } > > > -- > To view, visit https://gerrit.osmocom.org/1037 > To unsubscribe, visit https://gerrit.osmocom.org/settings > > Gerrit-MessageType: merged > Gerrit-Change-Id: I41f2242fdf59c3eb4b3f8f7f003c17f7e0df01aa > Gerrit-PatchSet: 9 > Gerrit-Project: openbsc > Gerrit-Branch: master > Gerrit-Owner: dexter <pmaier(a)sysmocom.de> > Gerrit-Reviewer: Harald Welte <laforge(a)gnumonks.org> > Gerrit-Reviewer: Jenkins Builder > Gerrit-Reviewer: Max <msuraev(a)sysmocom.de> > Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> -- - Neels Hofmeyr <nhofmeyr(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte

8 years, 8 months

osmo-bts-trx channel activation

by Max

Hi. In sysmobts we use ugly hack to auto-activate BCCH/CCCH on TS0 via opstart_compl(). How does channel activation looks like for osmo-bts-trx? On a related note: how do we decide on number of AGCH? In case of sysmobts it's communicated to L1 in agch.u8NbrOfAgch via lch_par. What would be equivalent for osmo-bts-trx? -- Max Suraev <msuraev(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte

8 years, 8 months

Re: Profiling data of decoding EPDAN compressed bitmap

by Holger Freyther

> On 13 Jul 2016, at 12:21, Max <msuraev(a)sysmocom.de> wrote: > Hi all, > After looking at the code, I don't think reusing table implementation > would be easy - the approaches are too different as well as underlying > data structures. okay. then we will need to use the tree based version and from my point of view we should do it the following way: * Remove osmo_t4_decode (and related routines) from libosmocore (last step) * Make the tree based decoder ready in terms of the surrounding style * Adopt/Clone the osmo_t4_decode tests and move them to the PCU (as part of the commit that adds the decoder to the PCU) @Me: After the infrastructure is in the PCU I will remove osmo_t4_decode (and tests) from libosmocore @Radisys: I am afraid the tree based decoding is not ready yet and as it impacts the upcoming encoder (and other RLE code as far as I understand) let me put it here. In osmo-pcu (and all other projects) we use libtalloc for memory allocations. This means the tree should use talloc with proper parent/child allocations. This way the destructor of the decoder will also free all nodes of the tree. There should be no call to malloc/free in the PCU. Please take the tests from libosmocore and make sure they work with the new decoder. Tests are the lifeline and we need more and not less of them. The decoder needs to be robust against invalid input. search_runlen can fail but the caller doesn't check for that. Please test with invalid/truncated or broken inputs to see we don't end in a never terminating while loop. Test using unit tests. Similar the current osmo_t4_decode can return an error that is propagated back to the compressed bitmap decoding and we should have the same. Reduce code duplication. With the decoder the only difference between the if/else is if the data is filled with 0x00 or 0xFF and which table/root to use. Instead of having code clones please parameterize either by having local variables in the beginning or by calling different (inline) functions. kind regards holger

8 years, 8 months

open-sip-connector error logs

by Anonim Stefan

Hi, I am using osmo-sip-connector 1.20161024 with osmocom-nitb 0.15.1.20161024 on debian jessie. I keep getting the below error[1] causing my syslog to fill up. Also I can see sometimes the sip connector replies with 0.0.0.0 RTP IP address. Anyone had this issues before ? Any idea what might be causing this? Regards, Stefan [1] Oct 25 11:58:28 openbsc1 osmo-sip-connector[283]: length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettport(0x1064c30): zero length packettpor

8 years, 8 months

openbsc - make check error

by Abdulghafar Shabaneh

Hi everyone I was trying Openbsc recently on Ubuntu 16.04.1 and came through these errors in make check command. Are they harmless? since installation and make commands were not having any error. myself@myself34:~/project/openbsc/openbsc$ make check make check-recursive make[1]: Entering directory '/home/myself/project/openbsc/openbsc' Making check in doc make[2]: Entering directory '/home/myself/project/openbsc/openbsc/doc' Making check in examples make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/doc/examples' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/doc/examples' make[3]: Entering directory '/home/myself/project/openbsc/openbsc/doc' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/doc' make[2]: Leaving directory '/home/myself/project/openbsc/openbsc/doc' Making check in include make[2]: Entering directory '/home/myself/project/openbsc/openbsc/include' Making check in openbsc make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/include/openbsc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/include/openbsc' make[3]: Entering directory '/home/myself/project/openbsc/openbsc/include' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/include' make[2]: Leaving directory '/home/myself/project/openbsc/openbsc/include' Making check in src make[2]: Entering directory '/home/myself/project/openbsc/openbsc/src' Making check in libcommon make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/libcommon' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/libcommon' Making check in libmgcp make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/libmgcp' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/libmgcp' Making check in libbsc make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/libbsc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/src/libbsc' Making check in libmsc make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/libmsc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/src/libmsc' Making check in libtrau make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/libtrau' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/libtrau' Making check in libfilter make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/libfilter' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/libfilter' Making check in osmo-nitb make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/osmo-nitb' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/osmo-nitb' Making check in osmo-bsc_mgcp make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/osmo-bsc_mgcp' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/osmo-bsc_mgcp' Making check in utils make[3]: Entering directory '/home/myself/project/openbsc/openbsc/src/utils' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/src/utils' Making check in ipaccess make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/ipaccess' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/ipaccess' Making check in gprs make[3]: Entering directory '/home/myself/project/openbsc/openbsc/src/gprs' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/src/gprs' Making check in osmo-bsc_nat make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/osmo-bsc_nat' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/osmo-bsc_nat' Making check in osmo-bsc make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/src/osmo-bsc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/src/osmo-bsc' make[3]: Entering directory '/home/myself/project/openbsc/openbsc/src' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/src' make[2]: Leaving directory '/home/myself/project/openbsc/openbsc/src' Making check in tests make[2]: Entering directory '/home/myself/project/openbsc/openbsc/tests' Making check in gsm0408 make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/gsm0408' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/gsm0408' Making check in db make[3]: Entering directory '/home/myself/project/openbsc/openbsc/tests/db' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/db' Making check in channel make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/channel' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/channel' Making check in mgcp make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/mgcp' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/mgcp' Making check in gprs make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/gprs' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/gprs' Making check in abis make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/abis' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/abis' Making check in gbproxy make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/gbproxy' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/gbproxy' Making check in trau make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/trau' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/trau' Making check in subscr make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/subscr' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/subscr' Making check in mm_auth make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/mm_auth' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/mm_auth' Making check in bsc-nat make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/bsc-nat' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/bsc-nat' Making check in bsc-nat-trie make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/bsc-nat-trie' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/bsc-nat-trie' Making check in bsc make[3]: Entering directory '/home/myself/project/openbsc/openbsc/tests/bsc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/bsc' Making check in smpp make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/smpp' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/smpp' Making check in gtphub make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/gtphub' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/gtphub' Making check in sgsn make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/sgsn' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/sgsn' Making check in oap make[3]: Entering directory '/home/myself/project/openbsc/openbsc/tests/oap' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/oap' Making check in xid make[3]: Entering directory '/home/myself/project/openbsc/openbsc/tests/xid' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/xid' Making check in sndcp_xid make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/sndcp_xid' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/sndcp_xid' Making check in slhc make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/slhc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests/slhc' Making check in v42bis make[3]: Entering directory '/home/myself/project/openbsc/ openbsc/tests/v42bis' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/myself/project/openbsc/ openbsc/tests/v42bis' make[3]: Entering directory '/home/myself/project/openbsc/openbsc/tests' make check-local make[4]: Entering directory '/home/myself/project/openbsc/openbsc/tests' :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [openbsc])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [openbsc])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.15.0.498-582e4])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [openbsc 0.15.0.498-582e4])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------ ## ## openbsc 0.15.0.498-582e4 test suite. ## ## ------------------------------------ ## Regression tests. 1: gsm0408 ok 2: subscr ok 3: db FAILED (testsuite.at:21 ) 4: channel ok 5: mgcp ok 6: mgcp-trans skipped ( testsuite.at:38) 7: gprs ok 8: bsc-nat ok 9: smpp ok 10: bsc-nat-trie ok 11: abis ok 12: bsc ok 13: gbproxy ok 14: trau ok 15: sgsn ok 16: oap ok 17: gtphub ok 18: mm_auth ok 19: xid ok 20: sndcp_xid ok 21: slhc ok 22: v42bis ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: 21 tests were run, 1 failed unexpectedly. 1 test was skipped. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [openbsc 0.15.0.498-582e4] testsuite: 3 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:717: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '/home/myself/project/openbsc/openbsc/tests' Makefile:568: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '/home/myself/project/openbsc/openbsc/tests' Makefile:420: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '/home/myself/project/openbsc/openbsc/tests' Makefile:484: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '/home/myself/project/openbsc/openbsc' Makefile:775: recipe for target 'check' failed make: *** [check] Error 2 myself@myself34:~/project/openbsc/openbsc$ Thanks Abdulghafar

8 years, 8 months

asan for libosmo*

by Max

Hi. Address Sanitizer is currently enabled for libosmocore jenkins build (which is really great, thanks al being involved!) but not for other libraries. According to recent checks in http://jenkins.osmocom.org/jenkins/job/Osmocom_Sanitizer/ asan only fails for OpenBSC so it seems like it can be enabled for other libosmo* libraries as well. What do you think? -- Max Suraev <msuraev(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte

8 years, 8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC