Hi all,
After buying a super Sim Kit (16 in 1) from China, I tried the reader (green PCB inside a blue transparent plastic case with a blue LED) and SIM (identified as a fakesupersim) with pysim tool. However i am getting the following error:
/pySim-prog.py -n 26C3 -c 49 -x 262 -y 42 -z 1234 -j 1 -t auto
Insert card now (or CTRL-C to cancel)
Autodetected card type fakemagicsim
Generated card parameters :
> Name : 26C3
> SMSP : e1ffffffffffffffffffffffff058100945555ffffffffffff000000
> ICCID : 8949262427518313026
> MCC/MNC : 262/42
> IMSI : 262422461512085
> Ki : 7b74741a1ee14337ec23f9ab92a13648
> OPC : ccd867d60797d8d45354a51b3ef568ff
Programming ...
Traceback (most recent call last):
File "./pySim-prog.py", line 530, in <module>
card.program(cp)
File "/home/nadicek/pysim/pysim/pySim/cards.py", line 231, in program
self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3))
File "/home/nadicek/pysim/pysim/pySim/commands.py", line 53, in update_binary
return self._tp.send_apdu_checksw(pdu)
File "/home/nadicek/pysim/pysim/pySim/transport/__init__.py", line 87, in send_apdu_checksw
raise RuntimeError("SW match failed ! Expected %s and got %s." % (sw.lower(), rv[1]))
RuntimeError: SW match failed ! Expected 9000 and got 9804.
I checked mailing lists and haven’t found anybody who had similar problem with pysim. Also I have tried forcing different models of SIM, but nothing is working. Obviously I can remove this check from the script file (__init__.py in /pySim/transport), however somebody had a reason to put such condition there. I would like to ask if it is safe to remove that line of code and the purpose of that line of code.
Thanks a lot and best regards
Martin
> I don't understand. This callback will be called with data you need to
write
> to the network. In case of MTP Level3 you will need to wrap that around
the
> msgb you got.
I means: is the interaction with mtp3 layer implemented (is sending sccp
data by mtp3 implemented by the library?)?
Also, what about the reception of data from mtp3 layer. is that implemented
in the sccp lib.
I am asking these questions because I see the code of mtp3 in the lib but no
significant call is present in the sccp part of the lib.
Thank you for your help.
Hi all,
Just wanted to share an issue and a quick workaround I found for it in case
anyone else has the same problem. I believe a cmd2 update is causing
pySim-shell to fail. After installing it on a fresh install of Ubuntu
Server 20.04 and getting the following error when I run "python3
pySim-shell -p0":
>Using PC/SC reader interface
>Autodetected card type: sysmoUSIM-SJS1
>AIDs on card:
> USIM: a0000000871002ffffffff8907090000
>Traceback (most recent call last):
> File "pySim-shell.py", line 512, in <module>
> app = PysimApp(card, rs, opts.script)
> File "pySim-shell.py", line 59, in __init__
> super().__init__(persistent_history_file='~/.pysim_shell_history',
allow_cli_args=False, use_ipython=True, auto_load_commands=False,
command_sets=basic_commands, >startup_script=script)
>TypeError: __init__() got an unexpected keyword argument 'use_ipython'
If you run into this you can fix it by uninstalling cmd2 and reinstalling
cmd2 with "pip3 install cmd2==1.5".
Best,
Bryan
On Tue, Jun 28, 2016 at 10:05:28AM +0200, Harald Welte wrote:
> [translated from german]
> is it certain that we switch a channel to PDCH only when
> gprs mode != none?
A TS can be GSM_PCHAN_TCH_F_PDCH; those are the only ones for which we
send a PDCH ACT message.
We send a PDCH ACT message
- during init (CHANNEL OML's state changed to enabled -> send PDCH ACT),
- and upon channel release ack when pchan == GSM_PCHAN_TCH_F_PDCH.
So the question is, when we receive a channel release ack, could that be
the PDCH release and we switch PDCH right back on by accident? No, because
we only receive a chan rel ack when the *TCH/F* is being released.
That is because the PDCH release is initiated "internally" from the PDCH
DEACT, and thus this condition in common/rsl.c rsl_tx_rf_rel_ack() catches
on, which existed before dyn PDCH:
if (lchan->rel_act_kind != LCHAN_REL_ACT_RSL) {
LOGP(DRSL, LOGL_NOTICE, "%s not sending REL ACK\n",
gsm_lchan_name(lchan));
return 0;
}
In rsl_rx_rf_chan_rel() the rel_act_kind is set to LCHAN_REL_ACT_RSL, but
not in the rsl_rx_dyn_pdch().
This is analogous to the ip.access way -- the ip.access nanobts replies to
a PDCH DEACT with a PDCH DEACT ACK and doesn't send a separate channel
release ack.
Maybe we could set rel_act_kind to some new LCHAN_REL_ACT_IPAC_DYN_PDCH
for clarity? (But we shouldn't actually send a release ack, to stay
compatible.)
Even though it works as-is, we should indeed add another flag check:
- We do check the flags that no ACT/DEACT is already pending;
- And we do send a PDCH DEACT only if ts->flags & TS_F_PDCH_ACTIVE;
- But we would send a PDCH ACT despite ts->flags & TS_F_PDCH_ACTIVE.
This should never happen, but it would make sense to ensure that.
~Neels
Hi,
My name is Brackley Cassinga Form DRC, we run a community network called
pamoja net where we offer gsm services using osmocom open source software
and OC Base station.
Recently I have tried to install another base station as the same installed
but I could not find any resource guiding through all the steps to take to
run NIB on a base station.
I'm currently running Ubuntu and I will appreciate if you could guide me on
the installation of BSC,hlr,MSC , in order to run a basic gsm network.
Thank you. Regards
--
*Ir Brackley heshima Casinga **Pacifique*
*CEO and Founder of kwanzatechnologie*
KwanzaTechnologies ,GlobalElectronics
+243977265291 | +243977265291 | Pcassinga(a)gmail.com/
brackley(a)ensemblepourladifference.org
www.kwantechnologies.jimdosite.com <http://www.kwantechnologies.com/> |
Skype: Brackley cassinga <https://webapp.wisestamp.com/#>
Av Semliki N 43
Hi all!
[please follow-up-to the openbsc(a)lists.osmocom.org mailing list, if
there is any discussion, we don't want to drag it over tons of mailing
lists in parallel]
Some weeks ago, I created https://osmocom.org/issues/5397 but it seems nobody
noticed the ticket or had any comments to it.
So let me post this as RFC here on the mailing list:
In the past, we had a gitolite/gitosis setup, which was fine in the
early days of git, but it means that people cannot easily create new
repositories, see who has permissions, and we cannot delegate ownership.
Even updating SSH keys requires manual interaction of a sysadmin like
me.
I would therefore suggest to migrate git.osmocom.org to gitea[1]
This would allow the following features:
* users can self-create any number of personal repositories (like gitlab/github)
* we can create 'organizations' along the line of reasonably independent
osmocom member projects like op25, who can then manage their own
repos/permissions/...
* gitea can link to redmine wiki and redmine issue trackers (rather than
using its own built-in)
For those repositories hosted in gerrit (mainly CNI), we would still
keep git.osmocom.org a read-only mirror, like we do it right now.
For those repositories not hosted in gerrit, users/projects could then
accept merge requests in gitea. Coupling this with 3rd party
authentication via github/gitlab/etc should make it easier for the
occasional contributor to submit changes.
There is a downside, of course; A lot of repo URLs have to change. Most
of our current repositories are at git.osmocom.org/project.git while
gitea follows a git.osmocom.org/organization/project.git scheme. I'm not
sure there is any way to help to mitigate this...
Any thoughts, comments?
[1] https://gitea.io/
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Dear fellow Osmocom developers,
as you all know, we've sadly had to skip OsmoDevCon 2020 and 2021,
trying to compensate it at least to some extent with our OsmoDevCall
every two weeks.
The COVID-19 pandemic is far from over, and we don't know what the
upcoming winter season will bring.
Nevertheless, I think it would be a good idea to start a discussion of
whether we should plan for an OsmoDevCon in 2022.
I personally would say let's plan for the usual late April 2022 time frame,
and if the pandemic situation deteriorates, we can still cancel it with
something like one month lead time.
I would also personally suggest to limit attendance to people who are fully
vaccinated, and in addition do a self-test for all participants every
morning.
In terms of venue, we might also consider to move to a venue that allows better
ventilation. Irrespective of the above we can also bring the air filters from
the sysmocom office.
So with that as an input statement, I would like to hear your opinion
on the above proposals. Who would want to attend? Any complaints against
the "vaccinated only plus daily self-tests in the morning" approach?
Regards,
Harald
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Dear Osmocom community,
It's my pleasure to announce the next OsmoDevCall on
February 25, 2022 at 20:00 CET
at
https://meeting5.franken.de/b/har-xbc-bsx-wvs (URL has changed!)
In this edition, I will present about a number of "advanced" SIM card topics,
such as GlobalPlatform SCP02, OTA, ARA-M and the ISIM applet.
This meeting will have the following schedule:
20:00 meet + greet
20:10 talk on advanced SIM topics by @laforge
21:00 unstructured supplementary social event [*]
Attendance is free of charge and open to anyone with an interest
in Osmocom or open source cellular technologies.
More information about OsmoDevCall, including the schedule
for further upcoming events can be found at
https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCall
Looking forward to meeting you on Friday.
Best regards,
Harald
[*] this is how we started to call the "unstructured" part of osmocom
developer conferences in the past, basically where anyone can talk about
anything, no formal schedule or structure.
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Dear Osmocom community,
It's my pleasure to announce the next OsmoDevCall on
February 11, 2022 at 20:00 CET
at
https://meeting5.franken.de/b/har-xbc-bsx-wvs (URL has changed!)
In this edition, we will not have a presentation, as unfortunately nobody
has volunteered to present this time. Nevertheless, we will still have
the call in case anyone wants to chat about random stuff.
This meeting will have the following schedule:
20:00 meet + greet
20:10 unstructured supplementary social event [*]
Attendance is free of charge and open to anyone with an interest
in Osmocom or open source cellular technologies.
More information about OsmoDevCall, including the schedule
for further upcoming events can be found at
https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCall
Looking forward to meeting you on Friday.
Best regards,
Harald
[*] this is how we started to call the "unstructured" part of osmocom
developer conferences in the past, basically where anyone can talk about
anything, no formal schedule or structure.
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Hello Harald & Co.
This sounds like a positive development. If there is any resulting trouble(s) we'll deal with it if / as nec.
Let me take this opportunity to thank you and Osmocom for hosting OP25.
Best Regards
Max
