> I don't understand. This callback will be called with data you need to
write
> to the network. In case of MTP Level3 you will need to wrap that around
the
> msgb you got.
I means: is the interaction with mtp3 layer implemented (is sending sccp
data by mtp3 implemented by the library?)?
Also, what about the reception of data from mtp3 layer. is that implemented
in the sccp lib.
I am asking these questions because I see the code of mtp3 in the lib but no
significant call is present in the sccp part of the lib.
Thank you for your help.
Hi all,
Just wanted to share an issue and a quick workaround I found for it in case
anyone else has the same problem. I believe a cmd2 update is causing
pySim-shell to fail. After installing it on a fresh install of Ubuntu
Server 20.04 and getting the following error when I run "python3
pySim-shell -p0":
>Using PC/SC reader interface
>Autodetected card type: sysmoUSIM-SJS1
>AIDs on card:
> USIM: a0000000871002ffffffff8907090000
>Traceback (most recent call last):
> File "pySim-shell.py", line 512, in <module>
> app = PysimApp(card, rs, opts.script)
> File "pySim-shell.py", line 59, in __init__
> super().__init__(persistent_history_file='~/.pysim_shell_history',
allow_cli_args=False, use_ipython=True, auto_load_commands=False,
command_sets=basic_commands, >startup_script=script)
>TypeError: __init__() got an unexpected keyword argument 'use_ipython'
If you run into this you can fix it by uninstalling cmd2 and reinstalling
cmd2 with "pip3 install cmd2==1.5".
Best,
Bryan
On Tue, Jun 28, 2016 at 10:05:28AM +0200, Harald Welte wrote:
> [translated from german]
> is it certain that we switch a channel to PDCH only when
> gprs mode != none?
A TS can be GSM_PCHAN_TCH_F_PDCH; those are the only ones for which we
send a PDCH ACT message.
We send a PDCH ACT message
- during init (CHANNEL OML's state changed to enabled -> send PDCH ACT),
- and upon channel release ack when pchan == GSM_PCHAN_TCH_F_PDCH.
So the question is, when we receive a channel release ack, could that be
the PDCH release and we switch PDCH right back on by accident? No, because
we only receive a chan rel ack when the *TCH/F* is being released.
That is because the PDCH release is initiated "internally" from the PDCH
DEACT, and thus this condition in common/rsl.c rsl_tx_rf_rel_ack() catches
on, which existed before dyn PDCH:
if (lchan->rel_act_kind != LCHAN_REL_ACT_RSL) {
LOGP(DRSL, LOGL_NOTICE, "%s not sending REL ACK\n",
gsm_lchan_name(lchan));
return 0;
}
In rsl_rx_rf_chan_rel() the rel_act_kind is set to LCHAN_REL_ACT_RSL, but
not in the rsl_rx_dyn_pdch().
This is analogous to the ip.access way -- the ip.access nanobts replies to
a PDCH DEACT with a PDCH DEACT ACK and doesn't send a separate channel
release ack.
Maybe we could set rel_act_kind to some new LCHAN_REL_ACT_IPAC_DYN_PDCH
for clarity? (But we shouldn't actually send a release ack, to stay
compatible.)
Even though it works as-is, we should indeed add another flag check:
- We do check the flags that no ACT/DEACT is already pending;
- And we do send a PDCH DEACT only if ts->flags & TS_F_PDCH_ACTIVE;
- But we would send a PDCH ACT despite ts->flags & TS_F_PDCH_ACTIVE.
This should never happen, but it would make sense to ensure that.
~Neels
Hi,
My name is Brackley Cassinga Form DRC, we run a community network called
pamoja net where we offer gsm services using osmocom open source software
and OC Base station.
Recently I have tried to install another base station as the same installed
but I could not find any resource guiding through all the steps to take to
run NIB on a base station.
I'm currently running Ubuntu and I will appreciate if you could guide me on
the installation of BSC,hlr,MSC , in order to run a basic gsm network.
Thank you. Regards
--
*Ir Brackley heshima Casinga **Pacifique*
*CEO and Founder of kwanzatechnologie*
KwanzaTechnologies ,GlobalElectronics
+243977265291 | +243977265291 | Pcassinga(a)gmail.com/
brackley(a)ensemblepourladifference.org
www.kwantechnologies.jimdosite.com <http://www.kwantechnologies.com/> |
Skype: Brackley cassinga <https://webapp.wisestamp.com/#>
Av Semliki N 43
Hi,
I would like to know if it is possible to disconnect a connected device to
my osmo-bsc system?
After running my osmo-bsc setup and my test phone is connected to my usrp
via 2g, is it possible to send a vty command or what are the steps to make
the connected device to detach to my bts?
Thank you so much.
Hnjojo
Dear Osmocom community,
It's my pleasure to announce the next OsmoDevCall at
July 23, 2021 at 20:00 CEST
at
https://meeting4.franken.de/b/har-xbc-bsx-wvs
This meeting will have the following schedule:
20:00 meet + greet
20:15 presentation on "high-level overview on IMS, VoLTE, VoWiFi"
21:00 USSE: unstructured supplementary social event [*]
22:00 close of call
Attendance is free of charge and open to anyone with an interest
in Osmocom.
More information about OsmoDevCall, including the schedule
for further upcoming events can be found at
https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCall
Looking forward to meeting you on Friday.
Best regards,
Harald
[*] this is how we started to call the "unstructured" part of osmocom
developer conferences in the past, basically where anyone can talk about
anything, no formal schedule or structure.
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Hello develop,
I want to program Administrative Data update the MS operation mode.
Are there any option command can use on "pySim-prog.py" ?
I saw "update_ad" in the pySIM/cards.py it mean Update Administrative Data.
Please help me......, thank you so much.
Best Regards,
Kenny
