> I don't understand. This callback will be called with data you need to
write
> to the network. In case of MTP Level3 you will need to wrap that around
the
> msgb you got.
I means: is the interaction with mtp3 layer implemented (is sending sccp
data by mtp3 implemented by the library?)?
Also, what about the reception of data from mtp3 layer. is that implemented
in the sccp lib.
I am asking these questions because I see the code of mtp3 in the lib but no
significant call is present in the sccp part of the lib.
Thank you for your help.
On Tue, Jun 28, 2016 at 10:05:28AM +0200, Harald Welte wrote:
> [translated from german]
> is it certain that we switch a channel to PDCH only when
> gprs mode != none?
A TS can be GSM_PCHAN_TCH_F_PDCH; those are the only ones for which we
send a PDCH ACT message.
We send a PDCH ACT message
- during init (CHANNEL OML's state changed to enabled -> send PDCH ACT),
- and upon channel release ack when pchan == GSM_PCHAN_TCH_F_PDCH.
So the question is, when we receive a channel release ack, could that be
the PDCH release and we switch PDCH right back on by accident? No, because
we only receive a chan rel ack when the *TCH/F* is being released.
That is because the PDCH release is initiated "internally" from the PDCH
DEACT, and thus this condition in common/rsl.c rsl_tx_rf_rel_ack() catches
on, which existed before dyn PDCH:
if (lchan->rel_act_kind != LCHAN_REL_ACT_RSL) {
LOGP(DRSL, LOGL_NOTICE, "%s not sending REL ACK\n",
gsm_lchan_name(lchan));
return 0;
}
In rsl_rx_rf_chan_rel() the rel_act_kind is set to LCHAN_REL_ACT_RSL, but
not in the rsl_rx_dyn_pdch().
This is analogous to the ip.access way -- the ip.access nanobts replies to
a PDCH DEACT with a PDCH DEACT ACK and doesn't send a separate channel
release ack.
Maybe we could set rel_act_kind to some new LCHAN_REL_ACT_IPAC_DYN_PDCH
for clarity? (But we shouldn't actually send a release ack, to stay
compatible.)
Even though it works as-is, we should indeed add another flag check:
- We do check the flags that no ACT/DEACT is already pending;
- And we do send a PDCH DEACT only if ts->flags & TS_F_PDCH_ACTIVE;
- But we would send a PDCH ACT despite ts->flags & TS_F_PDCH_ACTIVE.
This should never happen, but it would make sense to ensure that.
~Neels
Hi all,
Just wanted to share an issue and a quick workaround I found for it in case
anyone else has the same problem. I believe a cmd2 update is causing
pySim-shell to fail. After installing it on a fresh install of Ubuntu
Server 20.04 and getting the following error when I run "python3
pySim-shell -p0":
>Using PC/SC reader interface
>Autodetected card type: sysmoUSIM-SJS1
>AIDs on card:
> USIM: a0000000871002ffffffff8907090000
>Traceback (most recent call last):
> File "pySim-shell.py", line 512, in <module>
> app = PysimApp(card, rs, opts.script)
> File "pySim-shell.py", line 59, in __init__
> super().__init__(persistent_history_file='~/.pysim_shell_history',
allow_cli_args=False, use_ipython=True, auto_load_commands=False,
command_sets=basic_commands, >startup_script=script)
>TypeError: __init__() got an unexpected keyword argument 'use_ipython'
If you run into this you can fix it by uninstalling cmd2 and reinstalling
cmd2 with "pip3 install cmd2==1.5".
Best,
Bryan
Hi,
My name is Brackley Cassinga Form DRC, we run a community network called
pamoja net where we offer gsm services using osmocom open source software
and OC Base station.
Recently I have tried to install another base station as the same installed
but I could not find any resource guiding through all the steps to take to
run NIB on a base station.
I'm currently running Ubuntu and I will appreciate if you could guide me on
the installation of BSC,hlr,MSC , in order to run a basic gsm network.
Thank you. Regards
--
*Ir Brackley heshima Casinga **Pacifique*
*CEO and Founder of kwanzatechnologie*
KwanzaTechnologies ,GlobalElectronics
+243977265291 | +243977265291 | Pcassinga(a)gmail.com/
brackley(a)ensemblepourladifference.org
www.kwantechnologies.jimdosite.com <http://www.kwantechnologies.com/> |
Skype: Brackley cassinga <https://webapp.wisestamp.com/#>
Av Semliki N 43
Dear fellow Osmocom developers,
as you all know, we've sadly had to skip OsmoDevCon 2020 and 2021,
trying to compensate it at least to some extent with our OsmoDevCall
every two weeks.
The COVID-19 pandemic is far from over, and we don't know what the
upcoming winter season will bring.
Nevertheless, I think it would be a good idea to start a discussion of
whether we should plan for an OsmoDevCon in 2022.
I personally would say let's plan for the usual late April 2022 time frame,
and if the pandemic situation deteriorates, we can still cancel it with
something like one month lead time.
I would also personally suggest to limit attendance to people who are fully
vaccinated, and in addition do a self-test for all participants every
morning.
In terms of venue, we might also consider to move to a venue that allows better
ventilation. Irrespective of the above we can also bring the air filters from
the sysmocom office.
So with that as an input statement, I would like to hear your opinion
on the above proposals. Who would want to attend? Any complaints against
the "vaccinated only plus daily self-tests in the morning" approach?
Regards,
Harald
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Hi all,
I have a SysmoISIM-SJA2 which I believe doesn't have a CAT application and
doesn't support the SUSPEND APDU (per the manual). Given that, is there any
way to reset/refresh the card through APDU commands (or through any other
means)? Would something along the lines of deactivating and then
reactivating the USIM application work?
Thanks,
Bryan
Hi,
I'm wondering if anyone has a pcap file containing an Iu (or Iuh)
interface protocol trace of a classic 3G circuit-switched video call
around?
I would be curious particularly in the user plane side, i.e. showing
the RTP with IuUP for video calls. But I presume the RAB assignments
are also going to be interesting...
I know Dieter used to play with 3G CS video with one of his handset testers.
Hoewver, I doubt that device would have any Iu interface internally, so this
will unlikely provide any help here :/
Thanks in advance,
Harald
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Dear Osmocom community,
It's my pleasure to announce the next OsmoDevCall at
December 10, 2021 at 20:00 CET
at
https://meeting4.franken.de/b/har-xbc-bsx-wvs
This meeting will have the following schedule:
20:00 meet + greet
20:10 presentation "osmo-dev and running Osmocom TTCN3 tests suites locally" by osmith
21:00 unstructured supplementary social event [*]
Attendance is free of charge and open to anyone with an interest
in Osmocom or open source cellular technologies.
More information about OsmoDevCall, including the schedule
for further upcoming events can be found at
https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCall
Looking forward to meeting you on Friday.
Best regards,
Harald
[*] this is how we started to call the "unstructured" part of osmocom
developer conferences in the past, basically where anyone can talk about
anything, no formal schedule or structure.
--
- Harald Welte <laforge(a)osmocom.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
Hi Osmocom,
I'm trying to integrate the FreeSwitch as my external MNCC in my test lab using split stack. Currently, I'm getting an error message on FreeSwitch SIP/2.0 400 Missing Contact Header. I'm little bit confused with the error and I don't know where to troubleshoot this.
I've attached my osmo configurations and pcap trace for your reference. Hoping for your reply. Thank you.
Regards,
Justin Mark Repollo
