Hi, I am using OsmoSGSN in topology with OpenGGSN and proprietary simulator
of BSS. There was a problem with an implementation of Network service,
cause Network Service implementation in the simulator of BSS is based on
different release of 3GPP standard (3GPP TS 48. 016 v7. 4. 0
(2008-04)/Network service (Release 7))...and the problem is that in
IP-subnetwork, which I am using there is no use for RESET or UNBLOCK
procedure, so I had to do a PATCH in gprs_ns.c, which was needed to
complete succesful connection between sim-bss and OsmoSGSN:
switch (nsh->pdu_type) {
case NS_PDUT_ALIVE:
+++ LOGP(DNS, LOGL_INFO, "Rx NS ALIVE\n");
+++ /*mark NS-VC as alive*/
+++ (*nsvc)->state = NSE_S_ALIVE;
+++ (*nsvc)->remote_state = NSE_S_ALIVE;
+++ /*initiate TEST procedure: Send ALIVE_ACK and start timer*/
+++ rc = gprs_ns_tx_simple((*nsvc), NS_PDUT_ALIVE_ACK);
+++ nsvc_start_timer((*nsvc), NSVC_TIMER_TNS_TEST);
+++ break;
.
.
.
}
another PATCH I needed to do was to change a little bit procedure for
allocation of P-TMSI in procedure uint32_t sgsn_alloc_ptmsi(void) in
gprs_sgsn.c
uint32_t sgsn_alloc_ptmsi(void)
{
struct sgsn_mm_ctx *mm;
uint32_t ptmsi;
restart:
+++ ptmsi = rand() | 0xc0000000; /*because of GPRS IMSI
ATTACH*/
llist_for_each_entry(mm, &sgsn_mm_ctxts, list) {
if (mm->p_tmsi == ptmsi)
goto restart;
}
return ptmsi;
}
because in GPRS IMSI ATTACH in message ATTACH COMPLETE (3GPP 24.008,
23.003, 48.018) there is new TLLI==new allocated P-TMSI and I need local
TLLI, so I had to do it this way
regards Michal
