Hi All,
I’m not sure if this is a valid question but still I’m going to try.
I just updated from my old version of OSMOCOM to the latest one.
Upon trying to test the updated version, it seems that the ring back tone, the one that rings in the Caller (Anum/Mobile Originating) side if the call started to ring on the Callee (BNUM/Mobile Terminating) side, is missing.
Can anyone direct me to the right path where to check it?
Below are the configuration files used for each OSMOCOM elements.
Best Regard,
Ron Menez ron.menez@entropysolution.commailto:ron.menez@entropysolution.com
On 27. Jul 2017, at 18:30, Ron ron.menez@entropysolution.com wrote:
Hi All,
I’m not sure if this is a valid question but still I’m going to try.
I just updated from my old version of OSMOCOM to the latest one.
Upon trying to test the updated version, it seems that the ring back tone, the one that rings in the Caller (Anum/Mobile Originating) side if the call started to ring on the Callee (BNUM/Mobile Terminating) side, is missing.
Can anyone direct me to the right path where to check it?
Check if this[1] is in your checkout and being called during the call. Check what happens if you revert it. Check the diff of the MNCC log.. send a patch.
cheers holger
[1] http://git.osmocom.org/osmo-sip-connector/commit/?id=9d796ff15690eb313ec6d23...
Hi Holger,
We'll check on this and will share the results.
Thanks, Ron
Sent from my Huawei Mobile
-------- Original Message -------- Subject: Re: Ring Back Tone Missing during Call Setup From: Holger Freyther To: Ron CC: openbsc@lists.osmocom.org
On 27. Jul 2017, at 18:30, Ron ron.menez@entropysolution.com wrote:
Hi All,
I’m not sure if this is a valid question but still I’m going to try.
I just updated from my old version of OSMOCOM to the latest one.
Upon trying to test the updated version, it seems that the ring back tone, the one that rings in the Caller (Anum/Mobile Originating) side if the call started to ring on the Callee (BNUM/Mobile Terminating) side, is missing.
Can anyone direct me to the right path where to check it?
Check if this[1] is in your checkout and being called during the call. Check what happens if you revert it. Check the diff of the MNCC log.. send a patch.
cheers holger
[1] http://git.osmocom.org/osmo-sip-connector/commit/?id=9d796ff15690eb313ec6d23...
Hi Holger,
As tested, we had confirmed that the updated version of osmo-sip-connector has an issue regarding the Ring Back Tone.
The version that we had confirmed with Ring Back Tone is the "4649746798fe3074edab720302d135c74dcf3a38”.
Updated version that has no Ring Back Tone is “9d796ff15690eb313ec6d2323902f9ea677f300e"
Thanks for the support!
Best Regard,
Ron Menez ron.menez@entropysolution.commailto:ron.menez@entropysolution.com
On Aug 2, 2017, at 1:37 AM, Ron <ron.menez@entropysolution.commailto:ron.menez@entropysolution.com> wrote:
This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofinghttp://aka.ms/LearnAboutSpoofing Feedbackhttp://aka.ms/SafetyTipsFeedback Hi Holger,
We'll check on this and will share the results.
Thanks, Ron
Sent from my Huawei Mobile
-------- Original Message -------- Subject: Re: Ring Back Tone Missing during Call Setup From: Holger Freyther To: Ron CC: openbsc@lists.osmocom.orgmailto:openbsc@lists.osmocom.org
On 27. Jul 2017, at 18:30, Ron <ron.menez@entropysolution.commailto:ron.menez@entropysolution.com> wrote:
Hi All,
I’m not sure if this is a valid question but still I’m going to try.
I just updated from my old version of OSMOCOM to the latest one.
Upon trying to test the updated version, it seems that the ring back tone, the one that rings in the Caller (Anum/Mobile Originating) side if the call started to ring on the Callee (BNUM/Mobile Terminating) side, is missing.
Can anyone direct me to the right path where to check it?
Check if this[1] is in your checkout and being called during the call. Check what happens if you revert it. Check the diff of the MNCC log.. send a patch.
cheers holger
[1] http://git.osmocom.org/osmo-sip-connector/commit/?id=9d796ff15690eb313ec6d23...
On 11. Aug 2017, at 14:47, Ron ron.menez@entropysolution.com wrote:
Hi Holger,
Hey!
As tested, we had confirmed that the updated version of osmo-sip-connector has an issue regarding the Ring Back Tone.
The version that we had confirmed with Ring Back Tone is the "4649746798fe3074edab720302d135c74dcf3a38”.
Updated version that has no Ring Back Tone is “9d796ff15690eb313ec6d2323902f9ea677f300e"
okay a single commit. I don't have much spare time right now. I mentioned to diff the MNCC log as well but thinking of the specific change. Is your PBX playing an early ringback?
holger
Hi Holger,
No. Our PBX is not playing the early ringback.
Best Regard,
Ron Menez ron.menez@entropysolution.commailto:ron.menez@entropysolution.com
On Aug 11, 2017, at 3:04 PM, Holger Freyther <holger@freyther.demailto:holger@freyther.de> wrote:
On 11. Aug 2017, at 14:47, Ron <ron.menez@entropysolution.commailto:ron.menez@entropysolution.com> wrote:
Hi Holger,
Hey!
As tested, we had confirmed that the updated version of osmo-sip-connector has an issue regarding the Ring Back Tone.
The version that we had confirmed with Ring Back Tone is the "4649746798fe3074edab720302d135c74dcf3a38”.
Updated version that has no Ring Back Tone is “9d796ff15690eb313ec6d2323902f9ea677f300e"
okay a single commit. I don't have much spare time right now. I mentioned to diff the MNCC log as well but thinking of the specific change. Is your PBX playing an early ringback?
holger
-
Holger Freyther -
Ron