New subject: AW: AW: BS-11 runs, but no Network on my Mobile

1 Apr 2009

i tried different network and country codes (other than '1'). also i tried
different ARFCN, like 120 or so.
also note that eary tests showed me the network "01" just once, but at this time
i did not get complete provisioning of BS-11 (only 3 channels were configured).

does BS-11 need to react on telephone messages in order to show the network to the phone?
or does the phone just receive the BS-11 signalling information in order to display the
available network? i don't know if the receiver works.

also i can create BBSIG1 and PA1, but it will not be used by bsc_hack. what do i need to
change in order to use the second transponder? maybe this one works.

-----Ursprüngliche Nachricht-----
Von: Dieter Spaar [mailto:spaar@mirider.augusta.de] 
Gesendet: Mittwoch, 1. April 2009 15:09
An: Andreas.Eversberg
Cc: openbsc(a)lists.gnumonks.org
Betreff: Re: AW: AW: BS-11 runs, but no Network on my Mobile

Hello Andreas,

On Wed, 1 Apr 2009 12:36:15 +0200, "Andreas.Eversberg"
&lt;Andreas.Eversberg(a)versatel.de&gt; wrote:
...
  the load is correct. i get an error pop-up while
starting bsc_hack. this
 is because the LMT seems not to be 100% compatible with the load. with
 an older load i don't get this error pop-up, but it also doesn't work.
 also no alarms show on the LMT after syncing database. i will get the
 exact error message this weekend. 
The error message that LMT is not compatible to the firmware version
should be no problem, it just complains about unknown attributes.

Its strange, because you already know that the transmitter
is working, so I wonder why you don't receive something on
the phone. Have you tried a different phone, just to be
sure ? Maybe also using a different ARFCN might help.

Best regards,
  Dieter
-- 
Dieter Spaar, Germany                           spaar(a)mirider.augusta.de

AW: AW: AW: BS-11 runs, but no Network on my Mobile