3 Feb
2014
3 Feb
'14
4:35 p.m.
maybe try this:
use a gamma of 0. (this means that the maximum power of your phone is not
This I already am using, with only partial success, reaching about 10%
coverage, compared to voice.
reduced.) use an alpha of 0. (this means no reduction
depending on the
With the alpha I did not yet play very much, has to be tested this evening
:)
downlink RSSI.) also be sure to set MS_TXPWR_MAX_CCH
to 33dbm, so the
maximum allowed output power of the mobile is 2w, if supported. (at
openbsc the parameter is "ms max power 33")
My license allows only 100mW :) Anyway, this leads to jamming the receiver
when nearby subscribers drive the AGC (?) into limiting the signal, and not
recovering fast enough to decode the next (weaker) timeslot.
best regards,
andreas
Ralph.