17 Nov
2009
17 Nov
'09
10:27 a.m.
On Monday 16 November 2009 18:52:31 Andreas.Eversberg wrote:
<0200> paging.c:113 Going to send paging
commands: imsi:
'262XXXXXXXXXXX' tmsi: '0x3044ea7a'
<0010> abis_rsl.c:1179 Activating ARFCN(121) TS(0) SS(0) lctype SDCCH
chan_nr=0x20 r=PAGING ra=0x83
can we figure out which subscriber did the channel request?
We can not on this level. This a tricky question. So the MS is asking for any
channel and we were conservative and gave it a SDCCH and then the chan modify
for the voice call will fail.
The options I'm seeing for this are:
- Assign the SDCCH and don't do very early assignment... E.g. change
the mncc code to do the assignment command for a tch...
- Assign the TCH even if we don't need that much bandwidth...
I'm not sure if we want to support both very early and early assignment in the
code base or not... I'm just leaving this to harald to make the call.
z.