Hi Konrad,
On Mon, Jul 18, 2011 at 04:22:19PM +0200, Konrad Meier wrote:
The original plan was to test the setup at the GPN. But stupid me forgot to order the RJ69 connectors :-( Last week I was finally able to try the multi TRX setup with two nanoBTS, but without success. TRX 0 worked well but TRX 1 was not working for some reason. I think the problem is the initialization of TRX 1.
no problem. I have plenty of multi-trx setup experience, I doubt we would have any problem setting that part up at the camp.
I have two "SPLIT2P-SMA" from "Global Professional" [1]. My Idea was to use these two units with one naoBTS-Booster like shown here: [2]
unfortnately this url fails to load: [2] http://lab.ks.uni-freiburg.de/attachments/download/260/setup.png
I can ping the server, and I can connect to port 80, but it never responds to a GET request.
Your idea sounds good too, but would require some RX LNA.
Sylvain seems to have built some uplink LNAs.
We have two omnidirectional antennas from PROCOM: CXL 1800-3 More information: [3]
Ok. I have just ordered a couple of 1.4m long 8dBi gain omni antennas, just in case. I also ordered 50m low-loss cable (20dB on 100m) and 20 matching N plugs. A 500m roll of CAT6 cable for the abis/ip back-haul is here already
Ok, I will see what I can do.
thanks in advance.