17 Jun
2009
17 Jun
'09
1:12 a.m.
On Tue, Jun 16, 2009 at 05:22:55PM +0200, Dieter Spaar wrote:
ACK!
i like to
check out the measturement report feature of GSM. the A-bis
protocol shows measurement report indications, but i can't see any
request to turn it on. on the BCCH it is turned on, as far as i can see
in the bsc_hack.c. what do i miss? (neighbor cell frequencies?)
You need an active connection between the BTS and the MS to get the
measurement reports. The BTS will send its own results together with
the data received from the MS. If the cell has neighbor cells the
MS will also report their data (right now bsc_hack does not configure
any neighbor cells). I am not sure if you will get the measurement reports
for an active
connection by default or if they have to be turned on with a "Start
Measurement" command over OML.
it's part of the BTS or TRX attributes that are set from the BSC.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)