24 Sep
2012
24 Sep
'12
8:18 p.m.
On Wed, Sep 19, 2012 at 11:48 AM, Peter Stuge <peter(a)stuge.se> wrote:
☎ wrote:
Hmm... They are both set to the same port in my openbsc.cfg (which appears
to be working). The main GPRS page (
http://openbsc.osmocom.org/trac/wiki/OpenBSC_GPRS) has them both the same
when discussing the OpenBSC configuration. Should they be different? Could
my version be working because I have aliased some IP addresses on my system?
I don't want to modify a working configuration to find out, but if making
them different is a good plan, I would want to explore that option.
Thanks,
John
I have similar setup although in my case it
doesn't work at all.
..
/etc/osmo_sgsn.cfg:
..
ns
..
encapsulation udp local-ip 192.168.10.53
encapsulation udp local-port 23000
/etc/openbsc.cfg:
..
bts 0
..
gprs nsvc 0 local udp port 23000
gprs nsvc 0 remote udp port 23000
gprs nsvc 0 remote ip 192.168.10.53
I don't think both processes can use the same port; move one of them
and configure the other accordingly.
//Peter