Yes all works fine when not launching the setup with asterisk the MGW can route calls just fine. Below are the configs for sip-custom-contexts.conf and extensions.conf
[GSM] type=friend host=127.0.0.1 dtmfmode=rfc2833 canreinvite=no disallow=all allow=gsm context=gsmsubscriber port=5062
extensions.conf is quite large so i will omit all that was there by default and included is what i have added directly to the end of the file
[gsmsubscriber] exten=>_xxxxx,1,Dial(SIP/GSM/${EXTEN}) exten=>_XXXXX,n,Playback(vm-nobodyavail) exten=>_xxxxx,n,HangUp
sip.conf is again default with just this library include at the end of the file
#include sip-custom-contexts.conf
Thanks for the assistance
nat=yes
On Tue, 31 Dec 2019 at 16:16, Sandi Suhendro djks74@gmail.com wrote:
Can you describe more your configuration and setup with asterisk? your sip connector settings, etc.. ? Sip.conf, sip-custom-contexts, extensions.conf ?
You said it it works when using osmo-mgw for voice?
On Tue, Dec 31, 2019 at 9:24 PM Garrett Allen garrett.allen1990@gmail.com wrote:
Unfortunately it made no difference adding nat=yes to the asterisk config.
On Tue, 31 Dec 2019, 11:13 Sandi Suhendro, djks74@gmail.com wrote:
Have you try adding :
nat=yes
???
:)
regards, Sandi / DUO
On Tue, Dec 31, 2019, 09:20 Garrett Allen garrett.allen1990@gmail.com wrote:
Hi All
I've used osmo-bsc in non standalone mode ie seperate components and all works fine voice and sms work as should. However when introducing. sip connector with asterisk the handsets will not make voice calls they just constantly respond network busy. I'm using osmo bts-trx with osmo-trx-lms on raspbian 10 below is Asterisk config. Any help would be appreciated.
Gar
[GSM] type=friend host=127.0.0.1 dtmfmode=rfc2833 canreinvite=no disallow=all allow=gsm context=gsmsubscriber port=5062
-- Best Regards, Sandi