25 Jan
2014
25 Jan
'14
10:08 p.m.
On Fri, Jan 24, 2014 at 07:01:57PM +0400, Ivan Kluchnikov wrote:
Hi Holger,
Dear Ivan,
Thank you for advice.
Can you give me example?
Which command I should use to read counters?
I can't find any documentation for these commands.
Please take a look at libctrl/control_if.c and search for counter.
When we were designing the control interface we really didn't want
to write one command per counter. So there is a command installed
for "counter *" and "rate_ctr *". This gives access to all counters
by name.
E.g. using the example script we wrote you can do:
$ ./contrib/bsc_control.py -g counter.net.paging.expired -p 4249 -d localhost
Got message: GET_REPLY 1 counter.net.paging.expired 0
What is missing from the control interface is for a command to
describe itself. Maybe you have the time to implement this feature?
The output could be similar to the XML generated by the VTY. A command
could have an additional function to describe itself, the parameters
and such.
holger