Sipos Csaba wrote:
I'd suggest to make LCR use SIP for communcation with Asterisk. See http://stuge.se/lcr.txt for a minimal example of LCR configuration.
Do you have some more example configuration files for the Asterisk end of the SIP trunk?
I think you have to be able to configure Asterisk on your own, and if you aren't then probably the OpenBSC mailing list is not a very good place to ask for help.
I am almost sure that RTP bridge can only be used with IP based BTSes
Yes, that makes sense.
My problem is that I made test calls an analyzed the logs at both LCR and Asterisk end, and there is no difference between a good and a half sided call.
I believe that using SIP would make available more information. But of course a solid understanding of SIP is required to use it.
//Peter