22 Jan
2018
22 Jan
'18
12:58 p.m.
Dear Neels,
seems all good on my setup, I did success with osmo-sip-connector and get
bridge with osmo-msc,
I can make a call and destination got ring but there is no voice on both
side.
here is my setup:
osmo-bsc -c ~/osmo/osmo-bsc.cfg
osmo-hlr -l hlr.db -c ~/osmo/osmo-hlr.cfg
osmo-stp -c ~/osmo/osmo-stp.cfg
osmo-mgw -c ~/osmo/osmo-mgw-for-msc.cfg
osmo-mgw -c ~/osmo/osmo-mgw-for-bsc.cfg
osmo-msc -c ~/osmo/osmo-msc.cfg -M /tmp/bsc_mncc
osmo-bts-trx -c ~/osmo/osmo-bts.cfg
osmo-sip-connector -c ./osmo/osmo-sip-connector.cfg
osmo-trx -c 1 -s 4 -e -l INFO
Does osmo-msc still bugs?
btw,
Im using old osmo-trx (before 0.20) its stable for old one with limesdr.
since newest osmo-trx with limesdr not stable.
Thanks,
DUO
On Mon, Jan 15, 2018 at 12:29 PM, Neels Hofmeyr <nhofmeyr(a)sysmocom.de>
wrote:
On Sun, Jan 14, 2018 at 03:15:59PM +0000, Sandi
Suhendro wrote:
--
Best Regards,
DUO
now the auto create subscriber not working which
is Im looking and its
very
good and nice improovement.
To reiterate, in the old osmo-nitb, we used to have
'subscriber-create-on-demand', which the new osmo-hlr does not support.
It's
not an improvement, it's dropping a feature on the floor.
does my setting for the osmocom stacks is right
with this? :
osmo-bsc -c ~/osmo/osmo-bsc.cfg
osmo-hlr -l hlr.db -c ~/osmo/osmo-hlr.cfg
osmo-stp -c ~/osmo/osmo-stp.cfg
osmo-mgw -c ~/osmo/osmo-mgw-for-msc.cfg
osmo-mgw -c ~/osmo/osmo-mgw-for-bsc.cfg
osmo-msc -c ~/osmo/osmo-msc.cfg
DId I miss something? Im sure I miss something. :-)
looks good as long as you also have a BTS.
Of course just the invocation commands don't convey anything about the
settings.
And of course don't make us read your config unless you have an actual
problem.
and how to connect osmo-msc with asterisk?
The short answer is: use osmo-sip-connector. The long answer should be
somewhere on the wiki, but personally I'm not familiar with that. Maybe
someone
else has a pointer?
~N