Re: ip.access nanoBTS 140 - GSM1900

2 Oct 2009

For reference:

Here's my full output :

tnt@lain ~/projects/openbsc $ /opt/openbsc/sbin/bsc_hack
DB: Database initialized.
DB: Database prepared.
<8000> input/ipaccess.c:481 accept()ed new OML link from 10.0.0.133
<8000> input/ipaccess.c:221 Identified BTS 1801/0/0
bootstrapping OML for BTS 0
<0020> abis_nm.c:805 OC=SITE MANAGER(00) INST=(ff,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07)
<0020> abis_nm.c:805 OC=BTS(01) INST=(00,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff) STATE
CHG: OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,01) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,02) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,03) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,04) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,05) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,06) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,07) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Not installed(07) ADM=Locked
<0020> abis_nm.c:805 OC=GPRS NSE(f0) INST=(00,ff,ff) STATE CHG:
<0020> abis_nm.c:805 OC=GPRS CELL(f1) INST=(00,00,ff) STATE CHG:
<0020> abis_nm.c:805 OC=GPRS NSVC(f2) INST=(00,00,ff) STATE CHG:
<0020> abis_nm.c:805 OC=GPRS NSVC(f2) INST=(00,01,ff) STATE CHG:
<0020> abis_nm.c:859 Software Activate Request ACKing and Activating
<0020> abis_nm.c:805 OC=SITE MANAGER(00) INST=(ff,ff,ff) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x00 obj_inst=(0xff, 0xff, 0xff)
<0020> abis_nm.c:805 OC=SITE MANAGER(00) INST=(ff,ff,ff) Software
Activated Report
<0020> abis_nm.c:859 Software Activate Request ACKing and Activating
<0020> abis_nm.c:859 Software Activate Request NACKing for GPRS obj_class 0xf0
<0020> abis_nm.c:805 OC=BTS(01) INST=(00,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1644 Set BTS Attr (bts=0)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x01 obj_inst=(0x00, 0xff, 0xff)
<0020> abis_nm.c:805 OC=BTS(01) INST=(00,ff,ff) Software Activated Report
<0020> abis_nm.c:859 Software Activate Request ACKing and Activating
<0020> abis_nm.c:859 Software Activate Request ACKing and Activating
<0020> abis_nm.c:805 OC=BTS(01) INST=(00,ff,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff) STATE
CHG: OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff)
Software Activated Report
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x04 obj_inst=(0x00, 0x00, 0xff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=0)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x00)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,01) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=1)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x01)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,02) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=2)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x02)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,03) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=3)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,04) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=4)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x04)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,05) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=5)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x05)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,06) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=6)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x06)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,07) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05)
<0020> abis_nm.c:1741 Set Chan Attr (bts=0,trx=0,ts=7)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x03 obj_inst=(0x00, 0x00, 0x07)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,00) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,01) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,02) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,03) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,04) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,05) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,06) Software Activated Report
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,07) Software Activated Report
<0020> abis_nm.c:805 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=RADIO CARRIER(02) INST=(00,00,ff) Software
Activated Report
<0020> abis_nm.c:1661 Set TRX Attr (bts=0,trx=0)
<0020> abis_nm.c:1828 Sending OPSTART obj_class=0x02 obj_inst=(0x00, 0x00, 0xff)
<0020> abis_nm.c:2450 IPACCESS(0xe1): RSL CONNECT ACK IP=10.0.0.130 PORT=3003
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff) STATE
CHG: OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,01) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,02) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,03) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,04) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,05) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,06) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,07) STATE CHG:
OP_STATE=Disabled AVAIL=Dependency(05) ADM=Unlocked
<0020> abis_nm.c:805 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG:
OP_STATE=Disabled AVAIL=OK(ff) ADM=Unlocked
<0020> abis_nm.c:805 OC=RADIO CARRIER(02) INST=(00,00,ff) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<8000> input/ipaccess.c:542 accept()ed new RSL link from 10.0.0.133
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff) STATE
CHG: OP_STATE=Disabled AVAIL=Off line(03)
<8000> input/ipaccess.c:221 Identified BTS 1801/0/0
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff)
Failure Event Report Type=communication failure Severity=failure
ceased
<0020> abis_nm.c:805 OC=BASEBAND TRANSCEIVER(04) INST=(00,00,ff) STATE
CHG: OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,01) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,02) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,03) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,04) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,05) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,06) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,07) STATE CHG:
OP_STATE=Disabled AVAIL=Off line(03)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,00) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=BTS(01) INST=(00,ff,ff) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,01) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,02) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,03) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,04) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,05) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,06) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
<0020> abis_nm.c:805 OC=CHANNEL(03) INST=(00,00,07) STATE CHG:
OP_STATE=Enabled AVAIL=OK(ff)
bootstrapping RSL for BTS/TRX (0/0) using MCC=901 MNC=55 BSIC=63 TSC=7

And my config file :

!
! OpenBSC configuration saved from vty
!   !
password foo
!
line vty
 no login
!
network
 network country code 901
 mobile network code 55
 short name OpenBSC
 long name OpenBSC
 auth policy accept-all
 bts 0
  type nanobts1800
  ip.access unit_id 1801 0
  band GSM1800
  location_area_code 1
  training_sequence_code 7
  base_station_id_code 63
  oml e1 line 0 timeslot 1 sub-slot full
  oml e1 tei 25
  ! Limit to 12dBm ~ 16 mW
  ms max power 12
  trx 0
   arfcn 514
   ! Setup a 12dB attenuation (24dBm - 12dBm => 12dBm ~ 16 mW)
   max_power_red 12
   rsl e1 line 0 timeslot 1 sub-slot full
   rsl e1 tei 1
    timeslot 0
     phys_chan_config CCCH+SDCCH4
     e1 line 0 timeslot 1 sub-slot full
    timeslot 1
     phys_chan_config SDCCH8
     e1 line 0 timeslot 2 sub-slot 1
    timeslot 2
     phys_chan_config TCH/F
     e1 line 0 timeslot 2 sub-slot 2
    timeslot 3
     phys_chan_config TCH/F
     e1 line 0 timeslot 2 sub-slot 3
    timeslot 4
     phys_chan_config TCH/F
     e1 line 0 timeslot 3 sub-slot 0
    timeslot 5
     phys_chan_config TCH/F
     e1 line 0 timeslot 3 sub-slot 1
    timeslot 6
     phys_chan_config TCH/F
     e1 line 0 timeslot 3 sub-slot 2
    timeslot 7
     phys_chan_config TCH/F
     e1 line 0 timeslot 3 sub-slot 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

Re: ip.access nanoBTS 140 - GSM1900