[PATCH 3/3] Add vty command to explicitly reset given BVCI

From: Max &lt;msuraev(a)sysmocom.de&gt; It's useful for debugging and is similar to existing nsvc reset vty command. --- src/gb/gprs_bssgp_vty.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/src/gb/gprs_bssgp_vty.c b/src/gb/gprs_bssgp_vty.c index 080867b..4f53ae7 100644 --- a/src/gb/gprs_bssgp_vty.c +++ b/src/gb/gprs_bssgp_vty.c @@ -113,6 +113,29 @@ static void dump_bssgp(struct vty *vty, int stats) } } +DEFUN(bvc_reset, bvc_reset_cmd, + "bvc reset nsei <0-65535> bvci <0-65535>", + "Initiate BVC RESET procedure for a given NSEI and BVCI\n") +{ + uint16_t nsei = atoi(argv[0]), bvci = atoi(argv[1]); + struct bssgp_bvc_ctx *bvc; + + if (!strcmp(argv[0], "reset")) + return CMD_WARNING; + + if (argc != 2) + return CMD_WARNING; + + bvc = btsctx_by_bvci_nsei(bvci, nsei); + if (!bvc) { + vty_out(vty, "No BVC for NSEI %d BVCI %d%s", nsei, bvci, VTY_NEWLINE); + return CMD_WARNING; + } + int r = bssgp_tx_bvc_reset(bvc, bvci, BSSGP_CAUSE_OML_INTERV); + vty_out(vty, "Sent BVC RESET for NSEI %d BVCI %d: %d%s", nsei, bvci, r, VTY_NEWLINE); + return CMD_SUCCESS; +} + #define BSSGP_STR "Show information about the BSSGP protocol\n" DEFUN(show_bssgp, show_bssgp_cmd, "show bssgp", @@ -185,6 +208,7 @@ int bssgp_vty_init(void) install_element_ve(&show_bssgp_stats_cmd); install_element_ve(&show_bvc_cmd); install_element_ve(&logging_fltr_bvc_cmd); + install_element_ve(&bvc_reset_cmd); install_element(CFG_LOG_NODE, &logging_fltr_bvc_cmd); -- 2.7.2