Hello Andreas,
set ms max power to 0 to get 1 milliwatts to start with (rach and
initial power). set it to 30 to get 1 watts (1800) or 33 to get 2
watts (900). during dedicated channel, it is up to the bts to change
the power level up or down, depending on the uplink level/quality.
Thank you very much for your hint. I have set it to 0 dBm now and it
works fine. I have my phones directly next to the BTS so i think it will
not raise the power above 1 or 2 mW.
regards.
Philipp