Hello,
I finally got time to try out my BTS.
When I looked at the LMT I was confused about the
"MBCCU0: No Load" which seems to be the TRX0 ?
Ive already changed the TEI to 25.
What I always get is the Abis-Link: Restoring message on LMT.
Seems to be the "If you see any other difference (i.e. not reaching
Phase 3 Normal or no MBCCU0 Load) please contact the openbsc(a)lists.gnumonks.org
mailinglist with the full details. " problem ;) .
So can anybody help?
Here the boot-up:
LMT LOGON: ACK
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Warm Up Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: No Load
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: No Load
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load BTSCAC
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load BTSCAC
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load BTSDRX
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load BTSBBX
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load BTSARC
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load BTSARC
Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: Load
Abis-link: Down
PHASE: 3 Normal MBCCU0: No Load MBCCU1: Load
Abis-link: Restoring
^C
signal 2 received
LMT LOGOFF: ACK
And the query:
gsmbase:/home/tec/openbsc/src# ./bs11_config query
bs11_config (C) 2009 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
PHASE: 2 Maintenance MBCCU0: No Load MBCCU1: Load
Abis-link: Down
BS11 ATTRIBUTES:
BS-11 ESN PCB Serial Number: 001142
BS-11 ESN Hardware Code Number: 135-2044/03.03
BS-11 ESN Firmware Code Number: 135-2044/03.03
SITE MANAGER ATTRIBUTES:
E1 Channel: Port=0 Timeslot=1 (Full Slot)
TEI: 25
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
BS11 Power Amplifier 1 ATTRIBUTES:
TRX Power: 30mW (GSM)
LMT LOGOFF: ACK
Best regards
Björn Heller
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de