AW: AW: success

here is the layout of bchannel 2: 44332211 the bits for timeslot 1 (the right two) are not used, because we use this for signalling the bits for timeslot 2 are also not used, when i do a phone call. the bits for timeslot 3 and 4 are used when i do a call from mobile to mobile. a second call will use timeslot 5 and 6. all audio works. if a call would use timeslot 2 and 3, you would not notice that the channels are in reverse order. because the first timeslot used for audio is always 3 and the second is 4, i must select the right order. -----Ursprüngliche Nachricht----- Von: Harald Welte [mailto:laforge@gnumonks.org] Gesendet: Mittwoch, 15. April 2009 23:27 An: Andreas.Eversberg Cc: openbsc(a)lists.gnumonks.org Betreff: Re: AW: success On Wed, Apr 15, 2009 at 01:46:19AM +0200, Andreas.Eversberg wrote: I did not make any such change. Which brings up the question: Why is it working for me, nibbler, zecke, ... ? Probably really just coincidence, after all there are only four subslots in one slot, and we're typically using two of them, so the chances we end up using the right bits might be quite big, right? -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)