OsmocomBB compile testing / Re: libosmocore embedded build

Hi Andre and others. We currently have a series of patches from Vadim pending in gerrit for OsmocomBB. They cannot move ahead, as we have no compile testing / jenkins job which would give this a +1. To resolve this, we should also start to have a jenkins compile testing job for OsmocomBB. The "host" (PC) part of the code is built against regular libosmocore, just like e.g. openbsc or osmo-bts. That should be possible even so far, and it might make sense to start with that. Basically you need to: * git clone osmocom-bb * cd src/host/layer23 * regular 'autoreconf -fi && ./configure && make' compile-testing the 'embedded' (firmware) part is not possible easily in the current master. However, as a second step, and after the libosmocore embedded build has run (and it is installed to /usr/local/arm-none-eabi), and if you use the laforge/remove-libosmocore branch in OsmocomBB, you should also be able to compile-test the firmware using * git clone osmocom-bb * cd src/target/firmware && make There currently is no "make check" tests for either the host utilities or the firmware, and of course we have no clue if the resulting binaries will do anything useful on an actual pone [yet!], but I still think the two steps above would be very useful to move ahead, and to unify the patch submission/review/verification/approval/merge process in gerrit with what we have established for the network-side projects like OsmoBTS & co. Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)