Hi Dieter,
Am Do, 19.03.2009, 18:40, schrieb Dieter Spaar:
On Thu, 19 Mar 2009 17:25:15 +0100, "Holger Adams" holger@kernreaktor.org wrote:
I remember that one TRX wasn't ('No Load') loaded. Phase 3 was reached.
If this is the first one, it won't work because this is the one OpenBSC uses in the moment. If it is not loaded you should switch off and on the BS-11 and check if it works afterwards. On my BS-11 there seems to be a temperature related problem which sometimes requires quite a few restarts to get the first TRX loaded. Additionally it could be that an attached RS232 cable disturbs the startup process.
I switched to my second BS-11, there TRX1 seems to get loaded.
There are still some problems of getting the TRX started (sorry for keep bugging, but it doesn't make real fun to start developing without a working fundament).
Output of 'bsc_hack' <1000> input/misdn.c:123 alen =6, dev(0) channel(3) sapi(0) tei(1) <1000> input/misdn.c:126 <= len = 15, prim(0x3008) id(0x30100): DL_DATA_IND <1000> input/misdn.c:151 RX: 0c 12 01 90 0f 00 3c <1000> input/misdn.c:123 alen =6, dev(0) channel(3) sapi(0) tei(1) <1000> input/misdn.c:126 <= len = 20, prim(0x3008) id(0x30100): DL_DATA_IND <1000> input/misdn.c:151 RX: 0c 12 01 88 12 06 00 fa 00 00 00 00 <1000> input/misdn.c:123 alen =6, dev(0) channel(3) sapi(0) tei(1) <1000> input/misdn.c:126 <= len = 15, prim(0x3008) id(0x30100): DL_DATA_IND <1000> input/misdn.c:151 RX: 0c 12 01 90 0f 00 3c (...)
Full Log: http://www.kernreaktor.org/stuff/bs11_bschack_with_trx1.txt
E1-Trace:
08:53:15"2 1Tx> LAPD 0 1 0 20 0 0 INFO 0 CCCH(P+AG) RSL CHNIN 08:53:15"2 1Rx< LAPD 0 1 0 0 21 RR 08:53:15"2 1Tx> LAPD 0 1 0 21 0 0 INFO 0 CCCH(RACH) RSL CHNIN 08:53:15"2 1Rx< LAPD 0 1 0 0 22 RR 08:53:17"8 1Tx> LAPD 0 1 0 22 0 0 INFO 0 CCCH(P+AG) RSL CHNIN 08:53:17"8 1Rx< LAPD 0 1 0 0 23 RR (...)
Full Log: http://www.kernreaktor.org/stuff/bs11_e1_with_trx1.txt
I except of beeing 'DoSed' by various mobilephones lying around here, but nothing happens. I also can't see the 'OpenBSC-Test' provider on my mobilephones (manual network select).
Question to Michael Gernoth: Is this the situation you had with your "new" PC?
Best Regards, Holger