22 Jul
2021
22 Jul
'21
2:59 a.m.
Hello, thanks for the reply. What i mean about disconnecting is to make
camped devices as "un-camped" from my setup or bts. turning the phone in
flight mode is the correct example but is it possible to un-camped a
specific device from thw bts side or from my setup?
On Thu, Jul 22, 2021, 7:21 AM Neels Hofmeyr <nhofmeyr(a)sysmocom.de> wrote:
On Thu, Jul 22, 2021 at 04:20:55AM +0800, Henry Caga
wrote:
Hi,
I would like to know if it is possible to disconnect a connected device
to
my osmo-bsc system?
After running my osmo-bsc setup and my test phone is connected to my usrp
via 2g, is it possible to send a vty command or what are the steps to
make
the connected device to detach to my bts?
Thank you so much.
Hnjojo
On osmo-bsc level on a live channel you could try to release the lchan the
subscriber is using with this VTY command:
enable
bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> deactivate
fr
Of course the subscriber is then still attached to the network on MSC
level,
but the active connection should be interrupted.
The question is what exactly do you mean by "disconnect".
you can also put your phone in flight mode to disconnect it...