Well, we just have to find out what is happening. I have currently built
the trx-lms from source, so
once I can figure out how to build with debug....without breaking
everything....
In the mean time:
<0015> input/ipa.c:262 accept()ed new link from 127.0.0.1 to port 3002
<0004> abis_nm.c:538 BTS0 feature 'EGPRS' reported via OML does not
match statically set feature: 0 != 1. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'OML Alerts' reported via OML does not
match statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'CBCH' reported via OML does not match
statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'Fullrate speech V1' reported via OML
does not match statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'Halfrate speech V1' reported via OML
does not match statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'Fullrate speech EFR' reported via OML
does not match statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'Fullrate speech AMR' reported via OML
does not match statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:538 BTS0 feature 'Halfrate speech AMR' reported via OML
does not match statically set feature: 1 != 0. Please fix.
<0004> abis_nm.c:494 BTS0 Attribute Manufacturer Dependent State is
unreported
Yes, it would be nice to fix, I imagine this is a configuration
mismatch, where should these be set, and using what keywords?
This also indicates a problem, but I am to much a beginner to realize
its importance.....
<0003> osmo_bsc_main.c:284 bootstrapping RSL for BTS/TRX (0/0) on ARFCN
871 using MCC-MNC 001-01 LAC=1 CID=0 BSIC=63
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-0-CCCH_SDCCH4)[0xe641d0]{UNUSED}: Event TS_EV_OML_READY not
permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-1-TCH_F)[0xe64530]{UNUSED}: Event TS_EV_OML_READY not permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-2-TCH_F)[0xe64890]{UNUSED}: Event TS_EV_OML_READY not permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-3-TCH_F)[0xe64bf0]{UNUSED}: Event TS_EV_OML_READY not permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-4-TCH_F)[0xe64f50]{UNUSED}: Event TS_EV_OML_READY not permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-5-TCH_F)[0xe652b0]{UNUSED}: Event TS_EV_OML_READY not permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-6-TCH_F)[0xe65610]{UNUSED}: Event TS_EV_OML_READY not permitted
<0011> bts_ipaccess_nanobts.c:315
timeslot(0-0-7-TCH_F)[0xe65970]{UNUSED}: Event TS_EV_OML_READY not permitted
<0015> input/ipaccess.c:248 Sign link vanished, dead socket
Is it because BSC and BTS are out of sync over their A-if ? As a
consequence of trx restart ??
Regards,
Gullik
On 2019-01-05 12:02, Gullik Webjorn wrote:
I have found an interesting log entry, I cannot see
where it is called...
Sat Jan 5 11:58:42 2019 DDEV <0002> LMSDevice.cpp:386
[tid=3070102608] chan 0: Setting TX gain to 73 dB
Sat Jan 5 11:58:42 2019 DLMS <0003> LMSDevice.cpp:102 [tid=3021294672] L
Sat Jan 5 11:58:42 2019 DMAIN <0000> Transceiver.cpp:1039
[tid=3012840528] ClockInterface: sending IND CLOCK 920402
the message of a single L seems a little cryptic, and I have not found
it's origin......
Gullik