Re: ip.access beginner question

Hi all, I've got a PCS 1900 version of the ip.access BTS that I'm trying to get working with openbsc. I'm able to connect to the ip.access using bsc_hack, but I'm not sure what my next step should be. I made basic changes to the included bsc_hack ip.access config file, but I'm guessing that I'm missing something basic. Not sure if this matters, but one oddity I've found as I follow the instructions on the wiki is that ipaccess_config did not properly set the primary-oml IP. However, I was able to get the debug telnet client working, and set the oml IP directly from the ip.access debug shell.

========BSC_HACK OUTPUT: <0005> bsc_init.c:1123 WARNING: You are running an 'accept-all' network on a BTS that is not barred. This configuration is likely to interfere with production GSM networks and should only be used in a RF shielded environment such as a faraday cage!

<0004> bsc_init.c:1019 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 514 using MCC=1 MNC=1 LAC=1 CID=0 BSIC=63 TSC=7 <0003> bsc_init.c:798 SI1: 55 06 19 8f 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b <0003> bsc_init.c:798 SI2: 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00 <0003> bsc_init.c:798 SI3: 49 06 1b 00 00 00 f1 10 00 01 41 03 00 27 47 40 e5 04 00 3b 2b 2b 2b <0003> bsc_init.c:798 SI4: 31 06 1c 00 f1 10 00 01 47 40 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b <0003> bsc_init.c:798 SI5: 49 06 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b <0003> bsc_init.c:798 SI6: 2d 06 1e 00 00 00 f1 10 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b