Hi,
Please find BTS test report, week5 2017.
BTSes which has been tested with OsmoNITB are:
- sysmoBTS1002
- octasic BTS3500
- ettus B200
- nanoBTS model:165G
sysmoBTS1002 has been tested with the following 4 channel configurations:
6 TCH/F_TCH/H_PDCH (Osmocom style dynamic timeslots)
3 TCH/F, 3 PDCH
3 TCH/H, 3 PDCH
6 TCH/F_PDCH (ip.access style dynamic timeslots)
All test cases passed.
----------------------------------------------------
octasic BTS3500 has been tested with the next 2 channel configurations:
3 TCH/F, 3 PDCH
3 TCH/H, 3 PDCH
All test cases passed.
-----------------------------------------------------
ettus B200 has been tested with below channel configurations:
6 TCH/F_TCH/H_PDCH (Osmocom style dynamic timeslots)
3 TCH/F, 3 PDCH
3 TCH/H, 3 PDCH
6 TCH/F_PDCH (ip.access style dynamic timeslots)
All test cases passed.
------------------------------------------------------
During a weekly test of nanoBTS model:165G, an issue has been
discovered. It is reported in redmine:
https://osmocom.org/issues/1933
Short description: It was found that the initiated voice call drops
immediately after B subscriber accepts the call, when nanoBTS (model
165G) and NITB is configured with dynamic channels: 3 TCH/H and 3 PDCH.
Default voice codec tch-h hr has been selected.
Remaining test cases passed.
regards,
Ivaylo
--
------------------------------
- Ivaylo Kostov <ikostov(a)sysmocom.de> <mailto:ikostov@sysmocom.de>
http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
------------------------------