OsmoSGSN [PATCH], Network Service

Hi, I am using OsmoSGSN in topology with OpenGGSN and proprietary simulator of BSS. There was a problem with an implementation of Network service, cause Network Service implementation in the simulator of BSS is based on different release of 3GPP standard (3GPP TS 48. 016 v7. 4. 0 (2008-04)/Network service (Release 7))...and the problem is that in IP-subnetwork, which I am using there is no use for RESET or UNBLOCK procedure, so I had to do a PATCH in gprs_ns.c, which was needed to complete succesful connection between sim-bss and OsmoSGSN: switch (nsh->pdu_type) { case NS_PDUT_ALIVE: +++ LOGP(DNS, LOGL_INFO, "Rx NS ALIVE\n"); +++ /*mark NS-VC as alive*/ +++ (*nsvc)->state = NSE_S_ALIVE; +++ (*nsvc)->remote_state = NSE_S_ALIVE; +++ /*initiate TEST procedure: Send ALIVE_ACK and start timer*/ +++ rc = gprs_ns_tx_simple((*nsvc), NS_PDUT_ALIVE_ACK); +++ nsvc_start_timer((*nsvc), NSVC_TIMER_TNS_TEST); +++ break; . . . } another PATCH I needed to do was to change a little bit procedure for allocation of P-TMSI in procedure uint32_t sgsn_alloc_ptmsi(void) in gprs_sgsn.c uint32_t sgsn_alloc_ptmsi(void) { struct sgsn_mm_ctx *mm; uint32_t ptmsi; restart: +++ ptmsi = rand() | 0xc0000000; /*because of GPRS IMSI ATTACH*/ llist_for_each_entry(mm, &sgsn_mm_ctxts, list) { if (mm->p_tmsi == ptmsi) goto restart; } return ptmsi; } because in GPRS IMSI ATTACH in message ATTACH COMPLETE (3GPP 24.008, 23.003, 48.018) there is new TLLI==new allocated P-TMSI and I need local TLLI, so I had to do it this way regards Michal