Hello andreas,
thanks a lot for your help.
I resulted successful in running the osmoBTS with calypso phones. Currently I did (register) with 1 phone but will do it with 2 also. yes I am using the debugging option.
Can you kindly tell me how should I enable the PCU support. I have the osmo-pcu (master) installed and I start it before starting osmoBTS.
I tried to use jolly_test in osmo-pcu git, but errors concerning sysmobts.
I tried looking around sockets and vty but could not figure it out. I looked at the osmo-bts-sysmo code which has the command line option (-M --pcu-direct) to enable pcu support. I looked at the code and I found that pcu_direct is set to 1 (pcu_direct=1) when -M option is used.
using this as a reference in the main.c of osmo-bts-trx i directly defined pcu_direct=1 and then tried. The socket /tmp/pcu-bts is open but still I dont see any response from PCU.
Can you suggest me in this regard.
regards,
Altaf
On Tue, Jun 4, 2013 at 5:13 PM, altaf sk altaf329@gmail.com wrote:
Yes, I understand how trx uses two phones by reading your previous commits. I will study them
regards,
altaf
On Tue, Jun 4, 2013 at 4:53 PM, altaf sk altaf329@gmail.com wrote:
ok. Thank you...
I will look into this and will post if any success..
You say that using jolly/testing branch it is possible to use two phones. I am not sure how to use two phones and connect and how is the sync b/w them. Can you please give some brief idea before you write documentation.
isnt it possible with 1 phone, Just for minimal functions.?
I don't find the branch jolly/trx in git clone git:// github.com/chemeris/openbts-p2.8.git. Should I clone from a different git.
On Tue, Jun 4, 2013 at 4:13 PM, jolly andreas@eversberg.eu wrote:
altaf sk wrote:
PCU -> master bts -> gprs-work os_BB -> sylvain/testing openbsc -> master
pcu master is ok (everything merged). openbsc master is ok. bts gprs-work? i don't know this branch, please use jolly/trx. osmocom_bb you should use jolly/testing branch, because you need to use two phones, one for broadcast and one for timeslot 1 (gprs). i think i need to write a documentation for that. but in your case, the IMM.ASS problem must be solved first.