Hello there,
In my lab I have access to an ip.access nanoBTS 165AU which I have
setup with OsmoBSC.
Sending SMS between my two test handsets (Nokia 105) are working fine,
however it seems there is a problem when making calls. From the logs
it seems the radio is unable
to assign a TCH_F channel.
Any idea what could be causing this and how I would debug this further?
Cheers,
Sebastian
<0003> abis_rsl.c:1533 (bts=0) CHAN RQD: reason: call re-establishment
(ra=0x49, neci=0x01, chreq_reason=0x02)
<000f> lchan_select.c:262
lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{UNUSED}: (type=SDCCH)
Selected
<000f> lchan_fsm.c:636
lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{WAIT_TS_READY}:
(type=SDCCH) Activation requested: FOR_MS_CHANNEL_REQUEST voice=no
MGW-ci=none type=SDCCH tch-mode=SIGNALLING encr-alg=A5/0 ck=none
<0007> osmo_bsc_sigtran.c:297 Initializing resources for new SCCP
connection to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP...
<0007> osmo_bsc_sigtran.c:343 Opening new SCCP connection (id=4) to
MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP COMMON ID
<0007> osmo_bsc_bssap.c:1251 Rx MSC DTAP, SAPI: RR/MM/CC CHAN: 0
<0007> gsm_08_08.c:567 Tx MSC DTAP LINK_ID=0x00
<0007> osmo_bsc_sigtran.c:383 Tx MSC: DTAP
<0007> osmo_bsc_bssap.c:1251 Rx MSC DTAP, SAPI: RR/MM/CC CHAN: 2
<0007> osmo_bsc_bssap.c:1110 Rx MSC UDT BSSMAP PAGING
<0007> osmo_bsc_bssap.c:126 (msc0) Paging:
subscr-IMSI-901700000050081-TMSI-0x06e8ff82: (bts0) Paging on LAC 1
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP ASSIGNMENT REQ
<000f> lchan_select.c:262
lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{UNUSED}: (type=TCH_F) Selected
<0011> assignment_fsm.c:570
assignment(msc0-conn4_subscr-IMSI-901700000050080-TMSI-0xbf4aa84d_0-0-2-TCH_F-0)[0xaaaadc43e930]{WAIT_LCHAN_ACTIVE}:
(bts=0,trx=0,ts=2,ss=0) Starting Assignment: chan_mode=SPEECH_V1,
chan_type=FR, aoip=yes MSC-rtp=192.168.148.159:4074 (osmux=no)
<000f> lchan_fsm.c:636
lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_TS_READY}: (type=TCH_F)
Activation requested: FOR_ASSIGNMENT voice=yes MGW-ci=new type=TCH_F
tch-mode=SPEECH_V1 encr-alg=A5/0 ck=none
<000f> lchan_fsm.c:81
lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_RLL_RTP_ESTABLISH}:
(type=TCH_F) lchan-rtp failure in state WAIT_IPACC_CRCX_ACK: Received
NACK on IPACC CRCX
<000f> lchan_fsm.c:81
lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_RLL_RTP_ESTABLISH}:
(type=TCH_F) lchan allocation failed in state WAIT_RLL_RTP_ESTABLISH:
Failed to setup RTP stream: LCHAN_EV_RTP_ERROR in state
WAIT_RLL_RTP_ESTABLISH
<000f> lchan_fsm.c:116
lchan(0-0-2-TCH_F-0)[0xaaaadc432ba0]{WAIT_RLL_RTP_ESTABLISH}:
(type=TCH_F) Signalling Assignment FSM of error (lchan allocation
failed in state WAIT_RLL_RTP_ESTABLISH: Failed to setup RTP stream:
LCHAN_EV_RTP_ERROR in state WAIT_RLL_RTP_ESTABLISH
)
<0011> assignment_fsm.c:821
assignment(msc0-conn4_subscr-IMSI-901700000050080-TMSI-0xbf4aa84d_0-0-2-TCH_F-0)[0xaaaadc43e930]{WAIT_RR_ASS_COMPLETE}:
(bts=0,trx=0,ts=2,ss=0) Assignment failed in state
WAIT_RR_ASS_COMPLETE, cause RADIO INTERFACE MESSAGE FAILURE: Failed to
activate lchan (bts=0,trx=0,ts=2,ss=0)
<0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: ASSIGNMENT FAIL
<0011> assignment_fsm.c:148
assignment(msc0-conn4_subscr-IMSI-901700000050080-TMSI-0xbf4aa84d_0-0-2-TCH_F-0)[0xaaaadc43e930]{WAIT_RR_ASS_COMPLETE}:
(bts=0,trx=0,ts=2,ss=0) Assignment failed
<0007> osmo_bsc_bssap.c:1251 Rx MSC DTAP, SAPI: RR/MM/CC CHAN: 2
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP CLEAR COMMAND
<0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: CLEAR COMPLETE
<0005> paging.c:84 (bts=0) Going to send paging commands:
subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 0)
<000f> gsm_04_08_rr.c:1021
lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{WAIT_BEFORE_RF_RELEASE}:
(type=SDCCH) Got data in non active state, discarding.
<0005> paging.c:84 (bts=0) Going to send paging commands:
subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 1)
<0005> paging.c:84 (bts=0) Going to send paging commands:
subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 2)
<0003> abis_rsl.c:1533 (bts=0) CHAN RQD: reason: answer to paging
(ra=0x9f, neci=0x01, chreq_reason=0x01)
<000f> lchan_select.c:262
lchan(0-0-0-CCCH_SDCCH4-1)[0xaaaadc425390]{UNUSED}: (type=SDCCH)
Selected
<000f> lchan_fsm.c:636
lchan(0-0-0-CCCH_SDCCH4-1)[0xaaaadc425390]{WAIT_TS_READY}:
(type=SDCCH) Activation requested: FOR_MS_CHANNEL_REQUEST voice=no
MGW-ci=none type=SDCCH tch-mode=SIGNALLING encr-alg=A5/0 ck=none
<0005> paging.c:84 (bts=0) Going to send paging commands:
subscr-IMSI-901700000050081-TMSI-0x06e8ff82 for ch. type 0 (attempt 3)
<0007> osmo_bsc_sigtran.c:297 Initializing resources for new SCCP
connection to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP...
<0007> osmo_bsc_sigtran.c:343 Opening new SCCP connection (id=5) to
MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP COMMON ID
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP CLEAR COMMAND
<0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: CLEAR COMPLETE
<0003> abis_rsl.c:1533 (bts=0) CHAN RQD: reason: answer to paging
(ra=0x88, neci=0x01, chreq_reason=0x01)
<000f> lchan_select.c:262
lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{UNUSED}: (type=SDCCH)
Selected
<000f> lchan_fsm.c:636
lchan(0-0-0-CCCH_SDCCH4-0)[0xaaaadc4251c0]{WAIT_TS_READY}:
(type=SDCCH) Activation requested: FOR_MS_CHANNEL_REQUEST voice=no
MGW-ci=none type=SDCCH tch-mode=SIGNALLING encr-alg=A5/0 ck=none
<0007> osmo_bsc_sigtran.c:297 Initializing resources for new SCCP
connection to MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP...
<0007> osmo_bsc_sigtran.c:343 Opening new SCCP connection (id=6) to
MSC 0: RI=SSN_PC,PC=0.23.1,SSN=BSSAP
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP COMMON ID
<0007> osmo_bsc_bssap.c:1147 Rx MSC DT1 BSSMAP CLEAR COMMAND
<0007> osmo_bsc_sigtran.c:379 Tx MSC: BSSMAP: CLEAR COMPLETE
