OpenBSC February 2013

openbsc@lists.osmocom.org

16 participants
28 discussions

libosmo-abis questions
by Harald Welte 11 Feb '13

11 Feb '13

Hi Pablo, I am currently experimenting with porting osmo-bts over to libosmo-abis for the OML/RSL links. However, it seems that libosmo-abis might not be as complete as I was assuming. Maybe you have some ideas how to address the issue. As you probably know, upon start of the BTS only the OML link is established to the BSC. It is then via OML that the BSC instructs the BTS to establish a RSL link to a specified address. In the case of current OpenBSC, those IP addressee for OML and RSL are identical, but we cannot make that an assumption. Furthermore, in the case of a multi-TRX BTS, there will be one OML connection but multiplt RSL connections (one for each TRX). Those RSL connections will originate from different BTS hardware units. So far I've been using e1inp_ipa_bts_test.c as a template for the BTS side, but it seems that it * establishes OML and RSL at the same time, without waiting for the OML command to establish the RSL link * uses the same destination IP for OML and RSL without option for configuring this. Do you have any ideas how to best implement this? There is of course the option to bypass the entire e1inp_line / e1inp_sign_link abstraction and to use the ipa.c code directly (ipa_client_conn_create() and friends). But then I get only the multiplex without the andling of the ID_GET/ID_RESP/ID_ACK contained in ipaccess.c. Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

2 1

[PATCH] ipaccess: bts: don't get OML and RSL links up at the same time
by pablo＠gnumonks.org 11 Feb '13

11 Feb '13

From: Pablo Neira Ayuso <pablo(a)gnumonks.org> Harald reported that he needs that the RSL link becomes up once the OML link has been fully established, not both at the same time as it is currently happening. This patch changes the existing behaviour to control when the RSL link becomes up. Basically, you have to have to call e1inp_line_update once to get the OML link up. Then, once the OML link has been fully established, you call e1inp_line_update again to get the RSL link up. I have updates the examples files as well to adapt them to the new semantics. --- src/input/ipaccess.c | 141 ++++++++++++++++++++++++++++---------------- tests/e1inp_ipa_bts_test.c | 22 +++++-- 2 files changed, 107 insertions(+), 56 deletions(-) diff --git a/src/input/ipaccess.c b/src/input/ipaccess.c index 5e76a09..b8c1e7a 100644 --- a/src/input/ipaccess.c +++ b/src/input/ipaccess.c @@ -894,8 +894,73 @@ err: return ret; } +static int ipaccess_bts_oml_link_up(struct e1inp_line *line) +{ + struct ipa_client_conn *link; + + link = ipa_client_conn_create(tall_ipa_ctx, + &line->ts[E1INP_SIGN_OML-1], + E1INP_SIGN_OML, + line->ops->cfg.ipa.addr, + IPA_TCP_PORT_OML, + NULL, + ipaccess_bts_cb, + ipaccess_bts_write_cb, + NULL); + if (link == NULL) { + LOGP(DLINP, LOGL_ERROR, "cannot create OML " + "BTS link: %s\n", strerror(errno)); + return -ENOMEM; + } + if (ipa_client_conn_open(link) < 0) { + LOGP(DLINP, LOGL_ERROR, "cannot open OML BTS link: %s\n", + strerror(errno)); + ipa_client_conn_close(link); + ipa_client_conn_destroy(link); + return -EIO; + } + + return 0; +} + +static int ipaccess_bts_rsl_link_up(struct e1inp_line *line) +{ + struct ipa_client_conn *rsl_link; + + rsl_link = ipa_client_conn_create(tall_ipa_ctx, + &line->ts[E1INP_SIGN_RSL-1], + E1INP_SIGN_RSL, + line->ops->cfg.ipa.addr, + IPA_TCP_PORT_RSL, + NULL, + ipaccess_bts_cb, + ipaccess_bts_write_cb, + NULL); + if (rsl_link == NULL) { + LOGP(DLINP, LOGL_ERROR, "cannot create RSL " + "BTS link: %s\n", strerror(errno)); + return -ENOMEM; + } + if (ipa_client_conn_open(rsl_link) < 0) { + LOGP(DLINP, LOGL_ERROR, "cannot open RSL BTS link: %s\n", + strerror(errno)); + ipa_client_conn_close(rsl_link); + ipa_client_conn_destroy(rsl_link); + return -EIO; + } + + return 0; +} + +enum ipaccess_line_state { + NONE, + OML_UP, + RSL_UP, + ALL_UP = RSL_UP, +}; + struct ipaccess_line { - int line_already_initialized; + enum ipaccess_line_state state; }; static int ipaccess_line_update(struct e1inp_line *line) @@ -913,11 +978,9 @@ static int ipaccess_line_update(struct e1inp_line *line) il = line->driver_data; /* We only initialize this line once. */ - if (il->line_already_initialized) + if (il->state == ALL_UP) return 0; - il->line_already_initialized = 1; - switch(line->ops->cfg.ipa.role) { case E1INP_LINE_R_BSC: { struct ipa_server_link *oml_link, *rsl_link; @@ -952,58 +1015,34 @@ static int ipaccess_line_update(struct e1inp_line *line) ipa_server_link_destroy(rsl_link); return -EIO; } + il->state = ALL_UP; ret = 0; break; } case E1INP_LINE_R_BTS: { - struct ipa_client_conn *link, *rsl_link; - - LOGP(DLINP, LOGL_NOTICE, "enabling ipaccess BTS mode\n"); - - link = ipa_client_conn_create(tall_ipa_ctx, - &line->ts[E1INP_SIGN_OML-1], - E1INP_SIGN_OML, - line->ops->cfg.ipa.addr, - IPA_TCP_PORT_OML, - NULL, - ipaccess_bts_cb, - ipaccess_bts_write_cb, - NULL); - if (link == NULL) { - LOGP(DLINP, LOGL_ERROR, "cannot create OML " - "BTS link: %s\n", strerror(errno)); - return -ENOMEM; - } - if (ipa_client_conn_open(link) < 0) { - LOGP(DLINP, LOGL_ERROR, "cannot open OML BTS link: %s\n", - strerror(errno)); - ipa_client_conn_close(link); - ipa_client_conn_destroy(link); - return -EIO; - } - rsl_link = ipa_client_conn_create(tall_ipa_ctx, - &line->ts[E1INP_SIGN_RSL-1], - E1INP_SIGN_RSL, - line->ops->cfg.ipa.addr, - IPA_TCP_PORT_RSL, - NULL, - ipaccess_bts_cb, - ipaccess_bts_write_cb, - NULL); - if (rsl_link == NULL) { - LOGP(DLINP, LOGL_ERROR, "cannot create RSL " - "BTS link: %s\n", strerror(errno)); - return -ENOMEM; - } - if (ipa_client_conn_open(rsl_link) < 0) { - LOGP(DLINP, LOGL_ERROR, "cannot open RSL BTS link: %s\n", - strerror(errno)); - ipa_client_conn_close(rsl_link); - ipa_client_conn_destroy(rsl_link); - return -EIO; - } - ret = 0; + /* The first call e1inp_line_update, this gets OML link up. + * Once the OML link has been fully established, you call + * e1inp_line_update again to get the RSL link up. + */ + switch(il->state) { + case NONE: + LOGP(DLINP, LOGL_NOTICE, "enabling ipaccess BTS mode\n"); + LOGP(DLINP, LOGL_NOTICE, "getting up OML link\n"); + ret = ipaccess_bts_oml_link_up(line); + il->state = OML_UP; + break; + case OML_UP: + LOGP(DLINP, LOGL_NOTICE, "getting up RSL link\n"); + ret = ipaccess_bts_rsl_link_up(line); + il->state = ALL_UP; + break; + default: + LOGP(DLINP, LOGL_ERROR, "ipaccess BTS links already " + "up and running\n"); + ret = -EBUSY; + break; break; + } } default: break; diff --git a/tests/e1inp_ipa_bts_test.c b/tests/e1inp_ipa_bts_test.c index 31aac95..112af65 100644 --- a/tests/e1inp_ipa_bts_test.c +++ b/tests/e1inp_ipa_bts_test.c @@ -57,8 +57,7 @@ sign_link_up(void *unit, struct e1inp_line *line, enum e1inp_sign_type type) if (!oml_sign_link) { LOGP(DBTSTEST, LOGL_ERROR, "cannot create OML sign link\n"); - } - if (oml_sign_link) { + } else { unsigned int event_type = 0; /* tell GSM 12.21 that we're ready via our eventfd. */ @@ -69,6 +68,20 @@ sign_link_up(void *unit, struct e1inp_line *line, enum e1inp_sign_type type) } /* Now we can send OML messages to the BSC. */ bts_state = BTS_TEST_OML_SIGN_LINK_UP; + + /* Well, way more OML messages actually happen before + * we can say that the OML link is fully established, + * but this is a test after all... + */ + LOGP(DBTSTEST, LOGL_NOTICE, "OML link is up.\n"); + + /* Next stage: get RSL link up. */ + if (e1inp_line_update(line) < 0) { + LOGP(DBTSTEST, LOGL_ERROR, "problem enabling " + "E1 line\n"); + exit(EXIT_FAILURE); + } + } break; case E1INP_SIGN_RSL: @@ -82,13 +95,12 @@ sign_link_up(void *unit, struct e1inp_line *line, enum e1inp_sign_type type) if (!rsl_sign_link) { LOGP(DBTSTEST, LOGL_ERROR, "cannot create RSL sign link\n"); - } + } else + LOGP(DBTSTEST, LOGL_NOTICE, "RSL link is up.\n"); break; default: return NULL; } - if (sign_link) - LOGP(DBTSTEST, LOGL_NOTICE, "signal link has been set up.\n"); return sign_link; } -- 1.7.10.4

1 0

Using sip registrar for authentication
by Nik Pakar 11 Feb '13

11 Feb '13

Hello friends, Is there a way to use NITB/LCR alone with a sip registrar like freeswitch or yate and authenticate gsm user from sip registrar probably using the imsi as username ? Thanks for any feedback. Nik

3 2

Fix of IMMIDIATE ASSIGNMENT REJECT
by jolly 08 Feb '13

08 Feb '13

hi, this patch fixes the IMMIDIATE ASSIGNMENT REJECT message of OpenBSC. it is tested and works. regards, andreas

3 4

nanoBTS for sale
by Sergei Oleinikov 08 Feb '13

08 Feb '13

Hi All, maybe somebody is selling nanoBTS ? I'm from Latvia (Riga). Please send to sega(a)unix.lv Br, Sergei

1 0

[PATCH] Fix of IMMIDIATE ASSIGNMENT REJECT message
by Andreas Eversberg 07 Feb '13

07 Feb '13

The message was corrupt at several points. They are fixed now and successfully tested. A default T3122 timer value of 10 is defined by default now. If set to 0, the reject message will not be sent. Note that when using existing configs with T3122 value set to 0. --- openbsc/include/openbsc/gsm_data.h | 1 + openbsc/src/libbsc/abis_rsl.c | 7 +++++-- openbsc/src/libcommon/gsm_data.c | 1 + 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/openbsc/include/openbsc/gsm_data.h b/openbsc/include/openbsc/gsm_data.h index feb692f..a4c6fbc 100644 --- a/openbsc/include/openbsc/gsm_data.h +++ b/openbsc/include/openbsc/gsm_data.h @@ -192,6 +192,7 @@ enum gsm_auth_policy { #define GSM_T3101_DEFAULT 10 #define GSM_T3105_DEFAULT 40 #define GSM_T3113_DEFAULT 60 +#define GSM_T3122_DEFAULT 10 struct gsm_network { /* global parameters */ diff --git a/openbsc/src/libbsc/abis_rsl.c b/openbsc/src/libbsc/abis_rsl.c index 03ad8da..8aa151b 100644 --- a/openbsc/src/libbsc/abis_rsl.c +++ b/openbsc/src/libbsc/abis_rsl.c @@ -1295,7 +1295,7 @@ static int rsl_send_imm_ass_rej(struct gsm_bts *bts, /* create IMMEDIATE ASSIGN REJECT 04.08 message */ memset(iar, 0, sizeof(*iar)); iar->proto_discr = GSM48_PDISC_RR; - iar->msg_type = GSM48_MT_RR_IMM_ASS; + iar->msg_type = GSM48_MT_RR_IMM_ASS_REJ; iar->page_mode = GSM48_PM_SAME; memcpy(&iar->req_ref1, &rqd_refs[0], sizeof(iar->req_ref1)); @@ -1319,7 +1319,10 @@ static int rsl_send_imm_ass_rej(struct gsm_bts *bts, memcpy(&iar->req_ref4, &rqd_refs[0], sizeof(iar->req_ref4)); iar->wait_ind4 = wait_ind; - return rsl_imm_assign_cmd(bts, sizeof(iar), (uint8_t *) iar); + /* we need to subtract 1 byte from sizeof(*iar) since ia includes the l2_plen field */ + iar->l2_plen = GSM48_LEN2PLEN((sizeof(*iar)-1)); + + return rsl_imm_assign_cmd(bts, sizeof(*iar), (uint8_t *) iar); } /* MS has requested a channel on the RACH */ diff --git a/openbsc/src/libcommon/gsm_data.c b/openbsc/src/libcommon/gsm_data.c index c9f41fc..dd1d93b 100644 --- a/openbsc/src/libcommon/gsm_data.c +++ b/openbsc/src/libcommon/gsm_data.c @@ -97,6 +97,7 @@ struct gsm_network *gsm_network_init(uint16_t country_code, uint16_t network_cod net->T3101 = GSM_T3101_DEFAULT; net->T3105 = GSM_T3105_DEFAULT; net->T3113 = GSM_T3113_DEFAULT; + net->T3122 = GSM_T3122_DEFAULT; /* FIXME: initialize all other timers! */ /* default set of handover parameters */ -- 1.7.3.4 --------------050108030306090500080205--

1 0

Please review the osmo-bts zecke/request-queuing branch
by Holger Hans Peter Freyther 06 Feb '13

06 Feb '13

Hi LaF0rge, all, please review the zecke/request-queuing branch up to commit 18d42b6845f22131a. I would like to get this part of my patch series merged. The code begins to remove the data pointer for the l1if_gsm_req_compl call and will alaways pass the trx to the callback. The lchan is found through the hLayer3 pointer. holger

1 0

[PATCH 2/7] Add PH-/MPH-/TCH-SAP interface to common part of osmo-bts
by Andreas Eversberg 05 Feb '13

05 Feb '13

Instead of handling primitives directly at layer 1 specific code, osmo-bts handles primitives at common code. Therefore a new file 'l1sap.c' is added and integrated. The l1sap.c file: - receives PH-DATA indications and forwards them to layer 2. - checks for RF link loss and notifies BSC. - receives TCH indications and forwards them via RTP. - receives PH-RTS indications and sends PH-DATA requests with content according to its logical channel. - receives TCH-RTS indications and sends TCH requests with content received via RTP or loopback from TCH indications. - send MPH-INFO requests to activate, deactivate and modify logical channels and handles their confirms. - receives MPH-INFO indications with measurements from tranceiver. - forwards received and transmitted PH-DATA to GSMTAP. Therefore some obsolete bts_model_* calls have been replaced by bts_model_l1sap_down to send primitves down to layer 1 specific code. --- include/osmo-bts/Makefile.am | 3 +- include/osmo-bts/bts.h | 2 + include/osmo-bts/bts_model.h | 12 +- include/osmo-bts/gsm_data.h | 1 + include/osmo-bts/l1sap.h | 71 +++ include/osmo-bts/rsl.h | 2 +- include/osmo-bts/vty.h | 4 +- src/common/Makefile.am | 2 +- src/common/bts.c | 8 + src/common/l1sap.c | 948 +++++++++++++++++++++++++++++++++++++ src/common/logging.c | 4 +- src/common/measurement.c | 5 + src/common/pcu_sock.c | 15 +- src/common/rsl.c | 29 +- src/common/vty.c | 131 +++++- src/osmo-bts-sysmo/l1_if.c | 6 + src/osmo-bts-sysmo/main.c | 2 +- src/osmo-bts-sysmo/oml.c | 4 +- src/osmo-bts-sysmo/sysmobts_vty.c | 27 - tests/stubs.c | 3 + 20 files changed, 1206 insertions(+), 73 deletions(-) create mode 100644 include/osmo-bts/l1sap.h create mode 100644 src/common/l1sap.c diff --git a/include/osmo-bts/Makefile.am b/include/osmo-bts/Makefile.am index 456d416..d8c0002 100644 --- a/include/osmo-bts/Makefile.am +++ b/include/osmo-bts/Makefile.am @@ -1,2 +1,3 @@ noinst_HEADERS = abis.h bts.h bts_model.h gsm_data.h logging.h measurement.h \ - oml.h paging.h rsl.h signal.h vty.h amr.h pcu_if.h pcuif_proto.h + oml.h paging.h rsl.h signal.h vty.h amr.h pcu_if.h \ + pcuif_proto.h l1sap.h diff --git a/include/osmo-bts/bts.h b/include/osmo-bts/bts.h index 583c1eb..6b91c82 100644 --- a/include/osmo-bts/bts.h +++ b/include/osmo-bts/bts.h @@ -27,5 +27,7 @@ int lchan_init_lapdm(struct gsm_lchan *lchan); void load_timer_start(struct gsm_bts *bts); +struct gsm_time *get_time(struct gsm_bts *bts); + #endif /* _BTS_H */ diff --git a/include/osmo-bts/bts_model.h b/include/osmo-bts/bts_model.h index bfa6bd8..3b2855a 100644 --- a/include/osmo-bts/bts_model.h +++ b/include/osmo-bts/bts_model.h @@ -12,8 +12,6 @@ int bts_model_init(struct gsm_bts *bts); -struct gsm_time *bts_model_get_time(struct gsm_bts *bts); - int bts_model_check_oml(struct gsm_bts *bts, uint8_t msg_type, struct tlv_parsed *old_attr, struct tlv_parsed *new_attr, void *obj); @@ -27,20 +25,14 @@ int bts_model_opstart(struct gsm_bts *bts, struct gsm_abis_mo *mo, int bts_model_chg_adm_state(struct gsm_bts *bts, struct gsm_abis_mo *mo, void *obj, uint8_t adm_state); -int bts_model_rsl_chan_act(struct gsm_lchan *lchan, struct tlv_parsed *tp); -int bts_model_rsl_chan_rel(struct gsm_lchan *lchan); -int bts_model_rsl_deact_sacch(struct gsm_lchan *lchan); -int bts_model_rsl_mode_modify(struct gsm_lchan *lchan); - int bts_model_trx_deact_rf(struct gsm_bts_trx *trx); int bts_model_trx_close(struct gsm_bts_trx *trx); -void bts_model_rtp_rx_cb(struct osmo_rtp_socket *rs, const uint8_t *rtp_pl, - unsigned int rtp_pl_len); - int bts_model_vty_init(struct gsm_bts *bts); void bts_model_config_write_bts(struct vty *vty, struct gsm_bts *bts); void bts_model_config_write_trx(struct vty *vty, struct gsm_bts_trx *trx); +int bts_model_l1sap_down(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap); + #endif diff --git a/include/osmo-bts/gsm_data.h b/include/osmo-bts/gsm_data.h index c6cd7e4..980f8ef 100644 --- a/include/osmo-bts/gsm_data.h +++ b/include/osmo-bts/gsm_data.h @@ -58,6 +58,7 @@ struct gsm_bts_role_bts { struct { uint8_t tc4_ctr; } si; + struct gsm_time gsm_time; uint8_t radio_link_timeout; /* used by the sysmoBTS to adjust band */ diff --git a/include/osmo-bts/l1sap.h b/include/osmo-bts/l1sap.h new file mode 100644 index 0000000..a1dc303 --- /dev/null +++ b/include/osmo-bts/l1sap.h @@ -0,0 +1,71 @@ +#ifndef L1SAP_H +#define L1SAP_H + +/* timeslot and subslot from chan_nr */ +#define L1SAP_CHAN2TS(chan_nr) (chan_nr & 7) +#define L1SAP_CHAN2SS_TCHH(chan_nr) ((chan_nr >> 3) & 1) +#define L1SAP_CHAN2SS_SDCCH4(chan_nr) ((chan_nr >> 3) & 3) +#define L1SAP_CHAN2SS_SDCCH8(chan_nr) ((chan_nr >> 3) & 7) + +/* logical channel from chan_nr + link_id */ +#define L1SAP_IS_LINK_SACCH(link_id) ((link_id & 0xC0) == 0x40) +#define L1SAP_IS_CHAN_TCHF(chan_nr) ((chan_nr & 0xf8) == 0x08) +#define L1SAP_IS_CHAN_TCHH(chan_nr) ((chan_nr & 0xf0) == 0x10) +#define L1SAP_IS_CHAN_SDCCH4(chan_nr) ((chan_nr & 0xe0) == 0x20) +#define L1SAP_IS_CHAN_SDCCH8(chan_nr) ((chan_nr & 0xc0) == 0x40) +#define L1SAP_IS_CHAN_BCCH(chan_nr) ((chan_nr & 0xf8) == 0x80) +#define L1SAP_IS_CHAN_RACH(chan_nr) ((chan_nr & 0xf8) == 0x88) +#define L1SAP_IS_CHAN_AGCH_PCH(chan_nr) ((chan_nr & 0xf8) == 0x90) + +/* rach type from ra */ +#define L1SAP_IS_PACKET_RACH(ra) ((ra & 0xf0) == 0x70) + +/* CCCH block from frame number */ +#define L1SAP_FN2CCCHBLOCK(fn) ((fn % 51) / 5 - 1) + +/* PTCH layout from frame number */ +#define L1SAP_FN2MACBLOCK(fn) ((fn % 52) / 4) +#define L1SAP_FN2PTCCHBLOCK(fn) ((fn / 52) & 7) +#define L1SAP_IS_PTCCH(fn) ((fn % 52) == 12) + +/* subslot from any chan_nr */ +static inline uint8_t l1sap_chan2ss(uint8_t chan_nr) +{ + if (L1SAP_IS_CHAN_SDCCH8(chan_nr)) + return L1SAP_CHAN2SS_SDCCH8(chan_nr); + if (L1SAP_IS_CHAN_SDCCH4(chan_nr)) + return L1SAP_CHAN2SS_SDCCH4(chan_nr); + if (L1SAP_IS_CHAN_TCHH(chan_nr)) + return L1SAP_CHAN2SS_TCHH(chan_nr); + return 0; +} + + +/* allocate a msgb containing a osmo_phsap_prim + optional l2 data */ +struct msgb *l1sap_msgb_alloc(unsigned int l2_len); + +/* any L1 prim received from bts model */ +int l1sap_up(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap); + +/* pcu (socket interface) sends us a data request primitive */ +int l1sap_pdch_req(struct gsm_bts_trx_ts *ts, int is_ptcch, uint32_t fn, + uint16_t arfcn, uint8_t block_nr, uint8_t *data, uint8_t len); + +/* call-back function for incoming RTP */ +void l1sap_rtp_rx_cb(struct osmo_rtp_socket *rs, const uint8_t *rtp_pl, + unsigned int rtp_pl_len); + +/* channel control */ +int l1sap_chan_act(struct gsm_bts_trx *trx, uint8_t chan_nr); +int l1sap_chan_rel(struct gsm_bts_trx *trx, uint8_t chan_nr); +int l1sap_chan_deact_sacch(struct gsm_bts_trx *trx, uint8_t chan_nr); +int l1sap_chan_modify(struct gsm_bts_trx *trx, uint8_t chan_nr); + +extern const struct value_string gsmtap_sapi_names[]; +extern struct gsmtap_inst *gsmtap; +extern uint32_t gsmtap_sapi_mask; +extern uint8_t gsmtap_sapi_acch; + +#define msgb_l1sap_prim(msg) ((struct osmo_phsap_prim *)(msg)->l1h) + +#endif /* L1SAP_H */ diff --git a/include/osmo-bts/rsl.h b/include/osmo-bts/rsl.h index 251cd23..eae7845 100644 --- a/include/osmo-bts/rsl.h +++ b/include/osmo-bts/rsl.h @@ -7,7 +7,7 @@ int rsl_tx_chan_rqd(struct gsm_bts_trx *trx, struct gsm_time *gtime, uint8_t ra, uint8_t acc_delay); int rsl_tx_est_ind(struct gsm_lchan *lchan, uint8_t link_id, uint8_t *data, int len); -int rsl_tx_chan_act_ack(struct gsm_lchan *lchan, struct gsm_time *gtime); +int rsl_tx_chan_act_ack(struct gsm_lchan *lchan); int rsl_tx_chan_act_nack(struct gsm_lchan *lchan, uint8_t cause); int rsl_tx_conn_fail(struct gsm_lchan *lchan, uint8_t cause); int rsl_tx_rf_rel_ack(struct gsm_lchan *lchan); diff --git a/include/osmo-bts/vty.h b/include/osmo-bts/vty.h index 1bc7e71..9b113a8 100644 --- a/include/osmo-bts/vty.h +++ b/include/osmo-bts/vty.h @@ -15,8 +15,10 @@ extern struct cmd_element ournode_end_cmd; enum node_type bts_vty_go_parent(struct vty *vty); int bts_vty_is_config_node(struct vty *vty, int node); -int bts_vty_init(const struct log_info *cat); +int bts_vty_init(struct gsm_bts *bts, const struct log_info *cat); extern struct vty_app_info bts_vty_info; +char *osmo_str_tolower(const char *in); + #endif diff --git a/src/common/Makefile.am b/src/common/Makefile.am index b2f6f8e..1c6ff9e 100644 --- a/src/common/Makefile.am +++ b/src/common/Makefile.am @@ -5,4 +5,4 @@ LDADD = $(LIBOSMOCORE_LIBS) $(LIBOSMOTRAU_LIBS) noinst_LIBRARIES = libbts.a libbts_a_SOURCES = gsm_data_shared.c sysinfo.c logging.c abis.c oml.c bts.c \ rsl.c vty.c paging.c measurement.c amr.c lchan.c \ - load_indication.c pcu_sock.c + load_indication.c pcu_sock.c l1sap.c diff --git a/src/common/bts.c b/src/common/bts.c index e899ebd..c495fcd 100644 --- a/src/common/bts.c +++ b/src/common/bts.c @@ -239,3 +239,11 @@ int bts_supports_cipher(struct gsm_bts_role_bts *bts, int rsl_cipher) sup = (1 << (rsl_cipher - 2)) & bts->support.ciphers; return sup > 0; } + +struct gsm_time *get_time(struct gsm_bts *bts) +{ + struct gsm_bts_role_bts *btsb = bts->role; + + return &btsb->gsm_time; +} + diff --git a/src/common/l1sap.c b/src/common/l1sap.c new file mode 100644 index 0000000..ad833ea --- /dev/null +++ b/src/common/l1sap.c @@ -0,0 +1,948 @@ +/* L1 SAP primitives */ + +/* (C) 2011 by Harald Welte <laforge(a)gnumonks.org> + * (C) 2013 by Andreas Eversberg <jolly(a)eversberg.eu> + * + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <stdint.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <sys/types.h> +#include <sys/stat.h> + +#include <osmocom/core/msgb.h> +#include <osmocom/gsm/l1sap.h> +#include <osmocom/core/gsmtap.h> +#include <osmocom/core/gsmtap_util.h> +#include <osmocom/core/utils.h> + +#include <osmocom/trau/osmo_ortp.h> + +#include <osmo-bts/logging.h> +#include <osmo-bts/gsm_data.h> +#include <osmo-bts/l1sap.h> +#include <osmo-bts/pcu_if.h> +#include <osmo-bts/measurement.h> +#include <osmo-bts/bts.h> +#include <osmo-bts/rsl.h> +#include <osmo-bts/bts_model.h> + +static int l1sap_down(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap); + +static const uint8_t fill_frame[GSM_MACBLOCK_LEN] = { + 0x03, 0x03, 0x01, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, + 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, + 0x2B, 0x2B, 0x2B +}; + +/* allocate a msgb containing a osmo_phsap_prim + optional l2 data */ +struct msgb *l1sap_msgb_alloc(unsigned int l2_len) +{ + struct msgb *msg = msgb_alloc(sizeof(struct osmo_phsap_prim) + l2_len, + "l1sap_prim"); + + if (!msg) + return NULL; + + msg->l1h = msgb_put(msg, sizeof(struct osmo_phsap_prim)); + + return msg; +} + +static int l1sap_tx_ciph_req(struct gsm_bts_trx *trx, uint8_t chan_nr, + uint8_t downlink, uint8_t uplink) +{ + struct osmo_phsap_prim l1sap_ciph; + + osmo_prim_init(&l1sap_ciph.oph, SAP_GSM_PH, PRIM_MPH_INFO, + PRIM_OP_REQUEST, NULL); + l1sap_ciph.u.info.type = PRIM_INFO_ACT_CIPH; + l1sap_ciph.u.info.u.ciph_req.chan_nr = chan_nr; + l1sap_ciph.u.info.u.ciph_req.downlink = downlink; + l1sap_ciph.u.info.u.ciph_req.uplink = uplink; + + return l1sap_down(trx, &l1sap_ciph); +} + + +/* check if the message is a GSM48_MT_RR_CIPH_M_CMD, and if yes, enable + * uni-directional de-cryption on the uplink. We need this ugly layering + * violation as we have no way of passing down L3 metadata (RSL CIPHERING CMD) + * to this point in L1 */ +static int check_for_ciph_cmd(struct msgb *msg, struct gsm_lchan *lchan, + uint8_t chan_nr) +{ + + /* only do this if we are in the right state */ + switch (lchan->ciph_state) { + case LCHAN_CIPH_NONE: + case LCHAN_CIPH_RX_REQ: + break; + default: + return 0; + } + + /* First byte (Address Field) of LAPDm header) */ + if (msg->data[0] != 0x03) + return 0; + /* First byte (protocol discriminator) of RR */ + if ((msg->data[3] & 0xF) != GSM48_PDISC_RR) + return 0; + /* 2nd byte (msg type) of RR */ + if ((msg->data[4] & 0x3F) != GSM48_MT_RR_CIPH_M_CMD) + return 0; + + l1sap_tx_ciph_req(lchan->ts->trx, chan_nr, 0, 1); + + return 1; +} + +struct gsmtap_inst *gsmtap = NULL; +uint32_t gsmtap_sapi_mask = 0; +uint8_t gsmtap_sapi_acch = 0; + +const struct value_string gsmtap_sapi_names[] = { + { GSMTAP_CHANNEL_BCCH, "BCCH" }, + { GSMTAP_CHANNEL_CCCH, "CCCH" }, + { GSMTAP_CHANNEL_RACH, "RACH" }, + { GSMTAP_CHANNEL_AGCH, "AGCH" }, + { GSMTAP_CHANNEL_PCH, "PCH" }, + { GSMTAP_CHANNEL_SDCCH, "SDCCH" }, + { GSMTAP_CHANNEL_TCH_F, "TCH/F" }, + { GSMTAP_CHANNEL_TCH_H, "TCH/H" }, + { GSMTAP_CHANNEL_PACCH, "PACCH" }, + { GSMTAP_CHANNEL_PDCH, "PDTCH" }, + { GSMTAP_CHANNEL_PTCCH, "PTCCH" }, + { GSMTAP_CHANNEL_CBCH51,"CBCH" }, + { GSMTAP_CHANNEL_ACCH, "SACCH" }, + { 0, NULL } +}; + +static int to_gsmtap(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap) +{ + struct msgb *msg = l1sap->oph.msg; + uint8_t *data; + int len; + uint8_t chan_type = 0, tn = 0, ss = 0; + uint32_t fn; + uint8_t chan_nr, link_id; + uint16_t uplink = GSMTAP_ARFCN_F_UPLINK; + + if (!gsmtap) + return 0; + + switch (OSMO_PRIM_HDR(&l1sap->oph)) { + case OSMO_PRIM(PRIM_PH_DATA, PRIM_OP_REQUEST): + uplink = 0; + /* fall through */ + case OSMO_PRIM(PRIM_PH_DATA, PRIM_OP_INDICATION): + data = msg->data + sizeof(struct osmo_phsap_prim); + len = msg->len - sizeof(struct osmo_phsap_prim); + fn = l1sap->u.data.fn; + tn = L1SAP_CHAN2TS(l1sap->u.data.chan_nr); + chan_nr = l1sap->u.data.chan_nr; + link_id = l1sap->u.data.link_id; + if (L1SAP_IS_CHAN_TCHF(chan_nr)) { + if (trx->ts[tn].pchan == GSM_PCHAN_PDCH) { + if (L1SAP_IS_PTCCH(fn)) { + chan_type = GSMTAP_CHANNEL_PTCCH; + ss = L1SAP_FN2PTCCHBLOCK(fn); + if (l1sap->oph.primitive + == PRIM_OP_INDICATION) { + if (data[0] == 7) + return -EINVAL; + data++; + len--; + } + } else { + chan_type = GSMTAP_CHANNEL_PACCH; + } + } else + chan_type = GSMTAP_CHANNEL_TCH_F; + } else if (L1SAP_IS_CHAN_TCHH(chan_nr)) { + ss = L1SAP_CHAN2SS_TCHH(chan_nr); + chan_type = GSMTAP_CHANNEL_TCH_H; + } else if (L1SAP_IS_CHAN_SDCCH4(chan_nr)) { + ss = L1SAP_CHAN2SS_SDCCH4(chan_nr); + chan_type = GSMTAP_CHANNEL_SDCCH; + } else if (L1SAP_IS_CHAN_SDCCH8(chan_nr)) { + ss = L1SAP_CHAN2SS_SDCCH8(chan_nr); + chan_type = GSMTAP_CHANNEL_SDCCH; + } else if (L1SAP_IS_CHAN_BCCH(chan_nr)) { + chan_type = GSMTAP_CHANNEL_BCCH; + } else if (L1SAP_IS_CHAN_AGCH_PCH(chan_nr)) { +#warning Set BS_AG_BLKS_RES + /* The sapi depends on DSP configuration, not + * on the actual SYSTEM INFORMATION 3. */ + if (L1SAP_FN2CCCHBLOCK(fn) >= 1) + chan_type = GSMTAP_CHANNEL_PCH; + else + chan_type = GSMTAP_CHANNEL_AGCH; + } + if (L1SAP_IS_LINK_SACCH(link_id)) + chan_type |= GSMTAP_CHANNEL_ACCH; + break; + case OSMO_PRIM(PRIM_PH_RACH, PRIM_OP_INDICATION): + chan_type = GSMTAP_CHANNEL_RACH; + fn = l1sap->u.rach_ind.fn; + tn = L1SAP_CHAN2TS(l1sap->u.rach_ind.chan_nr); + chan_nr = l1sap->u.rach_ind.chan_nr; + if (L1SAP_IS_CHAN_TCHH(chan_nr)) + ss = L1SAP_CHAN2SS_TCHH(chan_nr); + else if (L1SAP_IS_CHAN_SDCCH4(chan_nr)) + ss = L1SAP_CHAN2SS_SDCCH4(chan_nr); + else if (L1SAP_IS_CHAN_SDCCH8(chan_nr)) + ss = L1SAP_CHAN2SS_SDCCH8(chan_nr); + data = &l1sap->u.rach_ind.ra; + len = 1; + break; + default: + return -ENOTSUP; + } + + if (len == 0) + return 0; + if ((chan_type & GSMTAP_CHANNEL_ACCH)) { + if (!gsmtap_sapi_acch) + return 0; + } else { + if (!((1 << (chan_type & 31)) & gsmtap_sapi_mask)) + return 0; + } + + gsmtap_send(gsmtap, trx->arfcn | uplink, tn, chan_type, ss, fn, 0, 0, + data, len); + + return 0; +} + +/* time information received from bts model */ +static int l1sap_info_time_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, + struct info_time_ind_param *info_time_ind) +{ + struct gsm_bts *bts = trx->bts; + struct gsm_bts_role_bts *btsb = bts->role; + + DEBUGP(DL1P, "MPH_INFO time ind %u\n", info_time_ind->fn); + + /* Update our data structures with the current GSM time */ + gsm_fn2gsmtime(&btsb->gsm_time, info_time_ind->fn); + + /* Update time on PCU interface */ + pcu_tx_time_ind(info_time_ind->fn); + + /* check if the measurement period of some lchan has ended + * and pre-compute the respective measurement */ + trx_meas_check_compute(trx, info_time_ind->fn - 1); + + /* increment 'total' for every possible rach */ + if (bts->c0->ts[0].pchan != GSM_PCHAN_CCCH_SDCCH4 + || (info_time_ind->fn % 51) < 27) + btsb->load.rach.total++; + + return 0; +} + +/* measurement information received from bts model */ +static int l1sap_info_meas_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, + struct info_meas_ind_param *info_meas_ind) +{ + struct bts_ul_meas ulm; + struct gsm_lchan *lchan; + + DEBUGP(DL1P, "MPH_INFO meas ind chan_nr=%02x\n", + info_meas_ind->chan_nr); + + lchan = &trx->ts[L1SAP_CHAN2TS(info_meas_ind->chan_nr)] + .lchan[l1sap_chan2ss(info_meas_ind->chan_nr)]; + + /* in the GPRS case we are not interested in measurement + * processing. The PCU will take care of it */ + if (lchan->type == GSM_LCHAN_PDTCH) + return 0; + + memset(&ulm, 0, sizeof(ulm)); + ulm.ta_offs_qbits = info_meas_ind->ta_offs_qbits; + ulm.ber10k = info_meas_ind->ber10k; + ulm.inv_rssi = info_meas_ind->inv_rssi; + + lchan_new_ul_meas(lchan, &ulm); + + return 0; +} + +/* any L1 MPH_INFO indication prim recevied from bts model */ +static int l1sap_mph_info_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, struct mph_info_param *info) +{ + int rc = 0; + + switch (info->type) { + case PRIM_INFO_TIME: + rc = l1sap_info_time_ind(trx, l1sap, &info->u.time_ind); + break; + case PRIM_INFO_MEAS: + rc = l1sap_info_meas_ind(trx, l1sap, &info->u.meas_ind); + break; + default: + LOGP(DL1P, LOGL_NOTICE, "unknown MPH_INFO ind type %d\n", + info->type); + break; + } + + return rc; +} + +/* activation confirm received from bts model */ +static int l1sap_info_act_cnf(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, + struct info_act_cnf_param *info_act_cnf) +{ + struct gsm_lchan *lchan; + + LOGP(DL1P, LOGL_INFO, "activate confirm chan_nr=%02x trx=%d\n", + info_act_cnf->chan_nr, trx->nr); + + lchan = &trx->ts[L1SAP_CHAN2TS(info_act_cnf->chan_nr)] + .lchan[l1sap_chan2ss(info_act_cnf->chan_nr)]; + + if (info_act_cnf->cause) + rsl_tx_chan_act_nack(lchan, info_act_cnf->cause); + else + rsl_tx_chan_act_ack(lchan); + + return 0; +} + +/* activation confirm received from bts model */ +static int l1sap_info_rel_cnf(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, + struct info_act_cnf_param *info_act_cnf) +{ + struct gsm_lchan *lchan; + + LOGP(DL1P, LOGL_INFO, "deactivate confirm chan_nr=%02x trx=%d\n", + info_act_cnf->chan_nr, trx->nr); + + lchan = &trx->ts[L1SAP_CHAN2TS(info_act_cnf->chan_nr)] + .lchan[l1sap_chan2ss(info_act_cnf->chan_nr)]; + + rsl_tx_rf_rel_ack(lchan); + + return 0; +} + +/* any L1 MPH_INFO confirm prim recevied from bts model */ +static int l1sap_mph_info_cnf(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, struct mph_info_param *info) +{ + int rc = 0; + + switch (info->type) { + case PRIM_INFO_ACTIVATE: + rc = l1sap_info_act_cnf(trx, l1sap, &info->u.act_cnf); + break; + case PRIM_INFO_DEACTIVATE: + rc = l1sap_info_rel_cnf(trx, l1sap, &info->u.act_cnf); + break; + default: + LOGP(DL1P, LOGL_NOTICE, "unknown MPH_INFO cnf type %d\n", + info->type); + break; + } + + return rc; +} + +/* PH-RTS-IND prim recevied from bts model */ +static int l1sap_ph_rts_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, struct ph_data_param *rts_ind) +{ + struct msgb *msg = l1sap->oph.msg; + struct gsm_time g_time; + struct gsm_lchan *lchan; + uint8_t chan_nr, link_id; + uint8_t tn, ss; + uint32_t fn; + uint8_t *p, *si; + struct lapdm_entity *le; + struct osmo_phsap_prim pp; + int rc; + + chan_nr = rts_ind->chan_nr; + link_id = rts_ind->link_id; + fn = rts_ind->fn; + tn = L1SAP_CHAN2TS(chan_nr); + + gsm_fn2gsmtime(&g_time, fn); + + DEBUGP(DL1P, "Rx PH-RTS.ind %02u/%02u/%02u chan_nr=%d link_id=%d\n", + g_time.t1, g_time.t2, g_time.t3, chan_nr, link_id); + + if (trx->ts[tn].pchan == GSM_PCHAN_PDCH) { + if (L1SAP_IS_PTCCH(rts_ind->fn)) { + pcu_tx_rts_req(&trx->ts[tn], 1, fn, 1 /* ARFCN */, + L1SAP_FN2PTCCHBLOCK(fn)); + + return 0; + } + pcu_tx_rts_req(&trx->ts[tn], 0, fn, 0 /* ARFCN */, + L1SAP_FN2MACBLOCK(fn)); + + return 0; + } + + /* reuse PH-RTS.ind for PH-DATA.req */ + if (!msg) { + LOGP(DL1P, LOGL_FATAL, "RTS without msg to be reused. Please " + "fix!\n"); + abort(); + } + msgb_trim(msg, sizeof(*l1sap)); + osmo_prim_init(&l1sap->oph, SAP_GSM_PH, PRIM_PH_DATA, PRIM_OP_REQUEST, + msg); + msg->l2h = msg->l1h + sizeof(*l1sap); + + if (L1SAP_IS_CHAN_BCCH(chan_nr)) { + p = msgb_put(msg, GSM_MACBLOCK_LEN); + /* get them from bts->si_buf[] */ + si = bts_sysinfo_get(trx->bts, &g_time); + if (si) + memcpy(p, si, GSM_MACBLOCK_LEN); + else + memcpy(p, fill_frame, GSM_MACBLOCK_LEN); + } else if (!(chan_nr & 0x80)) { /* only TCH/F, TCH/H, SDCCH/4 and SDCCH/8 have C5 bit cleared */ + if (L1SAP_IS_CHAN_TCHH(chan_nr)) + ss = L1SAP_CHAN2SS_TCHH(chan_nr); /* TCH/H */ + else if (L1SAP_IS_CHAN_SDCCH4(chan_nr)) + ss = L1SAP_CHAN2SS_SDCCH4(chan_nr); /* SDCCH/4 */ + else if (L1SAP_IS_CHAN_SDCCH8(chan_nr)) + ss = L1SAP_CHAN2SS_SDCCH8(chan_nr); /* SDCCH/8 */ + else + ss = 0; /* TCH/F */ + lchan = &trx->ts[tn].lchan[ss]; + if (L1SAP_IS_LINK_SACCH(link_id)) { + p = msgb_put(msg, GSM_MACBLOCK_LEN); + /* L1-header, if not set/modified by layer 1 */ + p[0] = lchan->ms_power; + p[1] = lchan->rqd_ta; + le = &lchan->lapdm_ch.lapdm_acch; + } else + le = &lchan->lapdm_ch.lapdm_dcch; + rc = lapdm_phsap_dequeue_prim(le, &pp); + if (rc < 0) { + if (L1SAP_IS_LINK_SACCH(link_id)) { + /* No SACCH data from LAPDM pending, send SACCH filling */ + uint8_t *si = lchan_sacch_get(lchan, &g_time); + if (si) { + /* The +2 is empty space where the DSP inserts the L1 hdr */ + memcpy(p + 2, si, GSM_MACBLOCK_LEN - 2); + } else + memcpy(p + 2, fill_frame, GSM_MACBLOCK_LEN - 2); + } else if ((!L1SAP_IS_CHAN_TCHF(chan_nr) && !L1SAP_IS_CHAN_TCHH(chan_nr)) + || lchan->rsl_cmode == RSL_CMOD_SPD_SIGN) { + /* send fill frame only, if not TCH/x != Signalling, otherwise send empty frame */ + p = msgb_put(msg, GSM_MACBLOCK_LEN); + memcpy(p, fill_frame, GSM_MACBLOCK_LEN); + } /* else the message remains empty, so TCH frames are sent */ + } else { + /* The +2 is empty space where the DSP inserts the L1 hdr */ + if (L1SAP_IS_LINK_SACCH(link_id)) + memcpy(p + 2, pp.oph.msg->data + 2, GSM_MACBLOCK_LEN - 2); + else { + p = msgb_put(msg, GSM_MACBLOCK_LEN); + memcpy(p, pp.oph.msg->data, GSM_MACBLOCK_LEN); + /* check if it is a RR CIPH MODE CMD. if yes, enable RX ciphering */ + check_for_ciph_cmd(pp.oph.msg, lchan, chan_nr); + } + msgb_free(pp.oph.msg); + } + } else if (L1SAP_IS_CHAN_AGCH_PCH(chan_nr)) { + p = msgb_put(msg, GSM_MACBLOCK_LEN); +#warning Set BS_AG_BLKS_RES + /* The sapi depends on DSP configuration, not + * on the actual SYSTEM INFORMATION 3. */ + struct gsm_bts_role_bts *btsb = trx->bts->role; + if (L1SAP_FN2CCCHBLOCK(fn) >= 1) { + /* PCH */ + paging_gen_msg(btsb->paging_state, p, &g_time); + } else { + /* AGCH */ + /* special queue of messages from IMM ASS CMD */ + struct msgb *amsg = bts_agch_dequeue(trx->bts); + if (!amsg) + memcpy(p, fill_frame, GSM_MACBLOCK_LEN); + else { + memcpy(p, amsg->data, amsg->len); + msgb_free(amsg); + } + } + } + + DEBUGP(DL1P, "Tx PH-DATA.req %02u/%02u/%02u chan_nr=%d link_id=%d\n", + g_time.t1, g_time.t2, g_time.t3, chan_nr, link_id); + + l1sap_down(trx, l1sap); + + /* don't free, because we forwarded data */ + return 1; +} + +/* TCH-RTS-IND prim recevied from bts model */ +static int l1sap_tch_rts_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, struct ph_tch_param *rts_ind) +{ + struct msgb *resp_msg; + struct osmo_phsap_prim *resp_l1sap, empty_l1sap; + struct gsm_time g_time; + struct gsm_lchan *lchan; + uint8_t chan_nr; + uint8_t tn, ss; + uint32_t fn; + + chan_nr = rts_ind->chan_nr; + fn = rts_ind->fn; + tn = L1SAP_CHAN2TS(chan_nr); + + gsm_fn2gsmtime(&g_time, fn); + + DEBUGP(DL1P, "Rx TCH-RTS.ind %02u/%02u/%02u chan_nr=%d\n", + g_time.t1, g_time.t2, g_time.t3, chan_nr); + + /* get timeslot and subslot */ + tn = L1SAP_CHAN2TS(chan_nr); + if (L1SAP_IS_CHAN_TCHH(chan_nr)) + ss = L1SAP_CHAN2SS_TCHH(chan_nr); /* TCH/H */ + else + ss = 0; /* TCH/F */ + lchan = &trx->ts[tn].lchan[ss]; + + if (!lchan->loopback && lchan->abis_ip.rtp_socket) { + osmo_rtp_socket_poll(lchan->abis_ip.rtp_socket); + /* FIXME: we _assume_ that we never miss TDMA + * frames and that we always get to this point + * for every to-be-transmitted voice frame. A + * better solution would be to compute + * rx_user_ts based on how many TDMA frames have + * elapsed since the last call */ + lchan->abis_ip.rtp_socket->rx_user_ts += GSM_RTP_DURATION; + } + /* get a msgb from the dl_tx_queue */ + resp_msg = msgb_dequeue(&lchan->dl_tch_queue); + if (!resp_msg) { + LOGP(DL1P, LOGL_DEBUG, "%s DL TCH Tx queue underrun\n", + gsm_lchan_name(lchan)); + resp_l1sap = &empty_l1sap; + } else { + resp_msg->l2h = resp_msg->data; + msgb_push(resp_msg, sizeof(*resp_l1sap)); + resp_msg->l1h = resp_msg->data; + resp_l1sap = msgb_l1sap_prim(resp_msg); + } + + memset(resp_l1sap, 0, sizeof(*resp_l1sap)); + osmo_prim_init(&resp_l1sap->oph, SAP_GSM_PH, PRIM_TCH, PRIM_OP_REQUEST, + resp_msg); + resp_l1sap->u.tch.chan_nr = chan_nr; + resp_l1sap->u.tch.fn = fn; + + DEBUGP(DL1P, "Tx TCH.req %02u/%02u/%02u chan_nr=%d\n", + g_time.t1, g_time.t2, g_time.t3, chan_nr); + + l1sap_down(trx, resp_l1sap); + + return 0; +} + +/* DATA received from bts model */ +static int l1sap_ph_data_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, struct ph_data_param *data_ind) +{ + struct msgb *msg = l1sap->oph.msg; + struct gsm_time g_time; + struct gsm_lchan *lchan; + struct lapdm_entity *le; + uint8_t *data = msg->l2h; + int len = msgb_l2len(msg); + uint8_t chan_nr, link_id; + uint8_t tn, ss; + uint32_t fn; + int8_t rssi; + + rssi = data_ind->rssi; + chan_nr = data_ind->chan_nr; + link_id = data_ind->link_id; + fn = data_ind->fn; + tn = L1SAP_CHAN2TS(chan_nr); + ss = l1sap_chan2ss(chan_nr); + + gsm_fn2gsmtime(&g_time, fn); + + DEBUGP(DL1P, "Rx PH-DATA.ind %02u/%02u/%02u chan_nr=%d link_id=%d\n", + g_time.t1, g_time.t2, g_time.t3, chan_nr, link_id); + + if (trx->ts[tn].pchan == GSM_PCHAN_PDCH) { + if (len == 0) + return -EINVAL; + if (L1SAP_IS_PTCCH(fn)) { + pcu_tx_data_ind(&trx->ts[tn], 1, fn, + 0 /* ARFCN */, L1SAP_FN2PTCCHBLOCK(fn), + data, len, rssi); + + return 0; + } + /* drop incomplete UL block */ + if (data[0] != 7) + return 0; + /* PDTCH / PACCH frame handling */ + pcu_tx_data_ind(&trx->ts[tn], 0, fn, 0 /* ARFCN */, + L1SAP_FN2MACBLOCK(fn), data + 1, len - 1, rssi); + + return 0; + } + + lchan = &trx->ts[tn].lchan[ss]; + + /* bad frame */ + if (len == 0) { + if (L1SAP_IS_LINK_SACCH(link_id) && lchan->s > 0) { + /* count down radio link counter S */ + lchan->s--; + DEBUGP(DMEAS, "counting down radio link counter S=%d\n", + lchan->s); + if (lchan->s == 0) + rsl_tx_conn_fail(lchan, + RSL_ERR_RADIO_LINK_FAIL); + } + + return -EINVAL; + } + + if (L1SAP_IS_LINK_SACCH(link_id)) { + struct gsm_bts_role_bts *btsb = trx->bts->role; + + le = &lchan->lapdm_ch.lapdm_acch; + /* count up radio link counter S */ + if (lchan->s < btsb->radio_link_timeout) { + lchan->s += 2; + if (lchan->s > btsb->radio_link_timeout) + lchan->s = btsb->radio_link_timeout; + DEBUGP(DMEAS, "counting up radio link counter S=%d\n", + lchan->s); + } + /* save the SACCH L1 header in the lchan struct for RSL MEAS RES */ + if (len < 2) { + LOGP(DL1P, LOGL_NOTICE, "SACCH with size %u<2 !?!\n", + len); + return -EINVAL; + } + /* Some brilliant engineer decided that the ordering of + * fields on the Um interface is different from the + * order of fields in RLS. See TS 04.04 (Chapter 7.2) + * vs. TS 08.58 (Chapter 9.3.10). */ + lchan->meas.l1_info[0] = data[0] << 3; + lchan->meas.l1_info[0] |= ((data[0] >> 5) & 1) << 2; + lchan->meas.l1_info[1] = data[1]; + lchan->meas.flags |= LC_UL_M_F_L1_VALID; + } else + le = &lchan->lapdm_ch.lapdm_dcch; + + /* if this is the first valid message after enabling Rx + * decryption, we have to enable Tx encryption */ + if (lchan->ciph_state == LCHAN_CIPH_RX_CONF) { + /* HACK: check if it's an I frame, in order to + * ignore some still buffered/queued UI frames received + * before decryption was enabled */ + if (data[0] == 0x01 && (data[1] & 0x01) == 0) { + l1sap_tx_ciph_req(trx, chan_nr, 1, 0); + } + } + + /* SDCCH, SACCH and FACCH all go to LAPDm */ + msgb_pull(msg, (msg->l2h - msg->data)); + msg->l1h = NULL; + lapdm_phsap_up(&l1sap->oph, le); + + /* don't free, because we forwarded data */ + return 1; +} + +/* TCH received from bts model */ +static int l1sap_tch_ind(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap, + struct ph_tch_param *tch_ind) +{ + struct msgb *msg = l1sap->oph.msg; + struct gsm_time g_time; + struct gsm_lchan *lchan; + uint8_t tn, ss, chan_nr; + uint32_t fn; + + chan_nr = tch_ind->chan_nr; + fn = tch_ind->fn; + tn = L1SAP_CHAN2TS(chan_nr); + if (L1SAP_IS_CHAN_TCHH(chan_nr)) + ss = L1SAP_CHAN2SS_TCHH(chan_nr); + else + ss = 0; + lchan = &trx->ts[tn].lchan[ss]; + + gsm_fn2gsmtime(&g_time, fn); + + DEBUGP(DL1P, "Rx TCH.ind %02u/%02u/%02u chan_nr=%d\n", + g_time.t1, g_time.t2, g_time.t3, chan_nr); + + msgb_pull(msg, sizeof(*l1sap)); + + /* hand msg to RTP code for transmission */ + if (lchan->abis_ip.rtp_socket) + osmo_rtp_send_frame(lchan->abis_ip.rtp_socket, + msg->data, msg->len, 160); + + /* if loopback is enabled, also queue received RTP data */ + if (lchan->loopback) { + struct msgb *tmp; + int count = 0; + + /* make sure the queue doesn't get too long */ + llist_for_each_entry(tmp, &lchan->dl_tch_queue, list) + count++; + while (count >= 1) { + tmp = msgb_dequeue(&lchan->dl_tch_queue); + msgb_free(tmp); + count--; + } + + msgb_enqueue(&lchan->dl_tch_queue, msg); + } + + return 0; +} + +/* RACH received from bts model */ +static int l1sap_ph_rach_ind(struct gsm_bts_trx *trx, + struct osmo_phsap_prim *l1sap, struct ph_rach_ind_param *rach_ind) +{ + struct gsm_bts *bts = trx->bts; + struct gsm_bts_role_bts *btsb = bts->role; + struct lapdm_channel *lc; + + DEBUGP(DL1P, "Rx PH-RA.ind"); + + lc = &trx->ts[0].lchan[4].lapdm_ch; + if (!lc) { + LOGP(DL1P, LOGL_ERROR, "unable to resolve LAPD channel\n"); + return -ENODEV; + } + + /* check for under/overflow / sign */ + if (rach_ind->acc_delay > btsb->max_ta) { + LOGP(DL1P, LOGL_INFO, "ignoring RACH request %u > max_ta(%u)\n", + rach_ind->acc_delay, btsb->max_ta); + return 0; + } + + /* check for packet access */ + if (trx == bts->c0 + && L1SAP_IS_PACKET_RACH(rach_ind->ra)) { + LOGP(DL1P, LOGL_INFO, "RACH for packet access\n"); + pcu_tx_rach_ind(bts, rach_ind->acc_delay << 2, + rach_ind->ra, rach_ind->fn); + + return 0; + } + + LOGP(DL1P, LOGL_INFO, "RACH for RR access (toa=%d, ra=%d)\n", + rach_ind->acc_delay, rach_ind->ra); + lapdm_phsap_up(&l1sap->oph, &lc->lapdm_dcch); + + return 0; +} + +/* any L1 prim received from bts model */ +int l1sap_up(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap) +{ + struct msgb *msg = l1sap->oph.msg; + int rc = 0; + + switch (OSMO_PRIM_HDR(&l1sap->oph)) { + case OSMO_PRIM(PRIM_MPH_INFO, PRIM_OP_INDICATION): + rc = l1sap_mph_info_ind(trx, l1sap, &l1sap->u.info); + break; + case OSMO_PRIM(PRIM_MPH_INFO, PRIM_OP_CONFIRM): + rc = l1sap_mph_info_cnf(trx, l1sap, &l1sap->u.info); + break; + case OSMO_PRIM(PRIM_PH_RTS, PRIM_OP_INDICATION): + rc = l1sap_ph_rts_ind(trx, l1sap, &l1sap->u.data); + break; + case OSMO_PRIM(PRIM_TCH_RTS, PRIM_OP_INDICATION): + rc = l1sap_tch_rts_ind(trx, l1sap, &l1sap->u.tch); + break; + case OSMO_PRIM(PRIM_PH_DATA, PRIM_OP_INDICATION): + to_gsmtap(trx, l1sap); + rc = l1sap_ph_data_ind(trx, l1sap, &l1sap->u.data); + break; + case OSMO_PRIM(PRIM_TCH, PRIM_OP_INDICATION): + rc = l1sap_tch_ind(trx, l1sap, &l1sap->u.tch); + break; + case OSMO_PRIM(PRIM_PH_RACH, PRIM_OP_INDICATION): + to_gsmtap(trx, l1sap); + rc = l1sap_ph_rach_ind(trx, l1sap, &l1sap->u.rach_ind); + break; + default: + LOGP(DL1P, LOGL_NOTICE, "unknown prim %d op %d\n", + l1sap->oph.primitive, l1sap->oph.operation); + break; + } + + /* Special return value '1' means: do not free */ + if (rc != 1 && msg) + msgb_free(msg); + + return rc; +} + +/* any L1 prim sent to bts model */ +static int l1sap_down(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap) +{ + if (OSMO_PRIM_HDR(&l1sap->oph) == + OSMO_PRIM(PRIM_PH_DATA, PRIM_OP_REQUEST)) + to_gsmtap(trx, l1sap); + + return bts_model_l1sap_down(trx, l1sap); +} + +/* pcu (socket interface) sends us a data request primitive */ +int l1sap_pdch_req(struct gsm_bts_trx_ts *ts, int is_ptcch, uint32_t fn, + uint16_t arfcn, uint8_t block_nr, uint8_t *data, uint8_t len) +{ + struct msgb *msg; + struct osmo_phsap_prim *l1sap; + struct gsm_time g_time; + + gsm_fn2gsmtime(&g_time, fn); + + DEBUGP(DL1P, "TX packet data %02u/%02u/%02u is_ptcch=%d trx=%d ts=%d " + "block_nr=%d, arfcn=%d, len=%d\n", g_time.t1, g_time.t2, + g_time.t3, is_ptcch, ts->trx->nr, ts->nr, block_nr, arfcn, len); + + msg = l1sap_msgb_alloc(len); + l1sap = msgb_l1sap_prim(msg); + osmo_prim_init(&l1sap->oph, SAP_GSM_PH, PRIM_PH_DATA, PRIM_OP_REQUEST, + msg); + l1sap->u.data.chan_nr = 0x08 | ts->nr; + l1sap->u.data.link_id = 0x00; + l1sap->u.data.fn = fn; + msg->l2h = msgb_put(msg, len); + memcpy(msg->l2h, data, len); + + return l1sap_down(ts->trx, l1sap); +} + +/*! \brief call-back function for incoming RTP */ +void l1sap_rtp_rx_cb(struct osmo_rtp_socket *rs, const uint8_t *rtp_pl, + unsigned int rtp_pl_len) +{ + struct gsm_lchan *lchan = rs->priv; + struct msgb *msg, *tmp; + struct osmo_phsap_prim *l1sap; + int count = 0; + + msg = l1sap_msgb_alloc(rtp_pl_len); + if (!msg) + return; + memcpy(msgb_put(msg, rtp_pl_len), rtp_pl, rtp_pl_len); + msgb_pull(msg, sizeof(*l1sap)); + + + /* make sure the queue doesn't get too long */ + llist_for_each_entry(tmp, &lchan->dl_tch_queue, list) + count++; + while (count >= 2) { + tmp = msgb_dequeue(&lchan->dl_tch_queue); + msgb_free(tmp); + count--; + } + + msgb_enqueue(&lchan->dl_tch_queue, msg); +} + +static int l1sap_chan_act_dact_modify(struct gsm_bts_trx *trx, uint8_t chan_nr, + enum osmo_mph_info_type type, uint8_t sacch_only) +{ + struct osmo_phsap_prim l1sap; + + memset(&l1sap, 0, sizeof(l1sap)); + osmo_prim_init(&l1sap.oph, SAP_GSM_PH, PRIM_MPH_INFO, PRIM_OP_REQUEST, + NULL); + l1sap.u.info.type = type; + l1sap.u.info.u.act_req.chan_nr = chan_nr; + l1sap.u.info.u.act_req.sacch_only = sacch_only; + + return l1sap_down(trx, &l1sap); +} + +int l1sap_chan_act(struct gsm_bts_trx *trx, uint8_t chan_nr) +{ + struct gsm_bts_role_bts *btsb = trx->bts->role; + struct gsm_lchan *lchan = &trx->ts[L1SAP_CHAN2TS(chan_nr)] + .lchan[l1sap_chan2ss(chan_nr)]; + + LOGP(DL1P, LOGL_INFO, "activating channel chan_nr=%02x trx=%d\n", + chan_nr, trx->nr); + + lchan->sacch_deact = 0; + lchan->s = btsb->radio_link_timeout; + + return l1sap_chan_act_dact_modify(trx, chan_nr, PRIM_INFO_ACTIVATE, 0); +} + +int l1sap_chan_rel(struct gsm_bts_trx *trx, uint8_t chan_nr) +{ + LOGP(DL1P, LOGL_INFO, "deactivating channel chan_nr=%02x trx=%d\n", + chan_nr, trx->nr); + + return l1sap_chan_act_dact_modify(trx, chan_nr, PRIM_INFO_DEACTIVATE, + 0); +} + +int l1sap_chan_deact_sacch(struct gsm_bts_trx *trx, uint8_t chan_nr) +{ + struct gsm_lchan *lchan = &trx->ts[L1SAP_CHAN2TS(chan_nr)] + .lchan[l1sap_chan2ss(chan_nr)]; + + LOGP(DL1P, LOGL_INFO, "deactivating sacch chan_nr=%02x trx=%d\n", + chan_nr, trx->nr); + + lchan->sacch_deact = 1; + + return l1sap_chan_act_dact_modify(trx, chan_nr, PRIM_INFO_DEACTIVATE, + 1); +} + +int l1sap_chan_modify(struct gsm_bts_trx *trx, uint8_t chan_nr) +{ + LOGP(DL1P, LOGL_INFO, "modifying channel chan_nr=%02x trx=%d\n", + chan_nr, trx->nr); + + return l1sap_chan_act_dact_modify(trx, chan_nr, PRIM_INFO_MODIFY, 0); +} diff --git a/src/common/logging.c b/src/common/logging.c index 98fd205..f56846e 100644 --- a/src/common/logging.c +++ b/src/common/logging.c @@ -69,8 +69,8 @@ static struct log_info_cat bts_log_info_cat[] = { [DL1C] = { .name = "DL1C", .description = "Layer 1", - .loglevel = LOGL_INFO, - .enabled = 1, + .color = "\033[1;32m", + .enabled = 1, .loglevel = LOGL_NOTICE, }, [DL1P] = { .name = "DL1P", diff --git a/src/common/measurement.c b/src/common/measurement.c index 774962d..ff80a9f 100644 --- a/src/common/measurement.c +++ b/src/common/measurement.c @@ -89,6 +89,11 @@ static int is_meas_complete(enum gsm_phys_chan_config pchan, unsigned int ts, /* receive a L1 uplink measurement from L1 */ int lchan_new_ul_meas(struct gsm_lchan *lchan, struct bts_ul_meas *ulm) { + /* in the GPRS case we are not interested in measurement + * processing. The PCU will take care of it */ + if (lchan->type == GSM_LCHAN_PDTCH) + return 0; + DEBUGP(DMEAS, "%s adding measurement, num_ul_meas=%d\n", gsm_lchan_name(lchan), lchan->meas.num_ul_meas); diff --git a/src/common/pcu_sock.c b/src/common/pcu_sock.c index a90caac..76ecf22 100644 --- a/src/common/pcu_sock.c +++ b/src/common/pcu_sock.c @@ -39,7 +39,7 @@ #include <osmo-bts/bts.h> #include <osmo-bts/rsl.h> #include <osmo-bts/signal.h> -#include <osmo-bts/bts_model.h> +#include <osmo-bts/l1sap.h> uint32_t trx_get_hlayer1(struct gsm_bts_trx *trx); @@ -57,10 +57,6 @@ static const char *sapi_string[] = { [PCU_IF_SAPI_PTCCH] = "PTCCH", }; -/* FIXME: common l1if include ? */ -int l1if_pdch_req(struct gsm_bts_trx_ts *ts, int is_ptcch, uint32_t fn, - uint16_t arfcn, uint8_t block_nr, uint8_t *data, uint8_t len); - static int pcu_sock_send(struct gsm_network *net, struct msgb *msg); /* FIXME: move this to libosmocore */ int osmo_unixsock_listen(struct osmo_fd *bfd, int type, const char *path); @@ -511,7 +507,7 @@ static int pcu_rx_data_req(struct gsm_bts *bts, uint8_t msg_type, } ts = &trx->ts[data_req->ts_nr]; is_ptcch = (data_req->sapi == PCU_IF_SAPI_PTCCH); - rc = l1if_pdch_req(ts, is_ptcch, data_req->fn, data_req->arfcn, + rc = l1sap_pdch_req(ts, is_ptcch, data_req->fn, data_req->arfcn, data_req->block_nr, data_req->data, data_req->len); break; default: @@ -544,9 +540,9 @@ static int pcu_rx_act_req(struct gsm_bts *bts, return -EINVAL; } if (act_req->activate) - bts_model_rsl_chan_act(lchan, NULL); + l1sap_chan_act(trx, gsm_lchan2chan_nr(lchan)); else - bts_model_rsl_chan_rel(lchan); + l1sap_chan_rel(trx, gsm_lchan2chan_nr(lchan)); return 0; } @@ -650,7 +646,8 @@ static void pcu_sock_close(struct pcu_sock_state *state) ts = &trx->ts[j]; if (ts->mo.nm_state.operational == NM_OPSTATE_ENABLED && ts->pchan == GSM_PCHAN_PDCH) - bts_model_rsl_chan_rel(ts->lchan); + l1sap_chan_rel(trx, + gsm_lchan2chan_nr(ts->lchan)); } } diff --git a/src/common/rsl.c b/src/common/rsl.c index 616ae0d..150f686 100644 --- a/src/common/rsl.c +++ b/src/common/rsl.c @@ -41,9 +41,9 @@ #include <osmo-bts/oml.h> #include <osmo-bts/amr.h> #include <osmo-bts/signal.h> -#include <osmo-bts/bts_model.h> #include <osmo-bts/measurement.h> #include <osmo-bts/pcu_if.h> +#include <osmo-bts/l1sap.h> //#define FAKE_CIPH_MODE_COMPL @@ -499,8 +499,9 @@ int rsl_tx_rf_rel_ack(struct gsm_lchan *lchan) } /* 8.4.2 sending CHANnel ACTIVation ACKnowledge */ -int rsl_tx_chan_act_ack(struct gsm_lchan *lchan, struct gsm_time *gtime) +int rsl_tx_chan_act_ack(struct gsm_lchan *lchan) { + struct gsm_time *gtime = get_time(lchan->ts->trx->bts); struct msgb *msg; uint8_t chan_nr = gsm_lchan2chan_nr(lchan); uint8_t ie[2]; @@ -760,14 +761,12 @@ static int rsl_rx_chan_activ(struct msgb *msg) dch->chan_nr, type, lchan->tch_mode); /* actually activate the channel in the BTS */ - return bts_model_rsl_chan_act(msg->lchan, &tp); + return l1sap_chan_act(lchan->ts->trx, dch->chan_nr); } /* 8.4.14 RF CHANnel RELease is received */ -static int rsl_rx_rf_chan_rel(struct gsm_lchan *lchan) +static int rsl_rx_rf_chan_rel(struct gsm_lchan *lchan, uint8_t chan_nr) { - int rc; - if (lchan->abis_ip.rtp_socket) { rsl_tx_ipac_dlcx_ind(lchan, RSL_ERR_NORMAL_UNSPEC); osmo_rtp_socket_free(lchan->abis_ip.rtp_socket); @@ -775,11 +774,11 @@ static int rsl_rx_rf_chan_rel(struct gsm_lchan *lchan) msgb_queue_flush(&lchan->dl_tch_queue); } - rc = bts_model_rsl_chan_rel(lchan); + l1sap_chan_rel(lchan->ts->trx, chan_nr); lapdm_channel_exit(&lchan->lapdm_ch); - return rc; + return 0; } #ifdef FAKE_CIPH_MODE_COMPL @@ -962,10 +961,10 @@ static int rsl_tx_mode_modif_ack(struct gsm_lchan *lchan) /* 8.4.9 MODE MODIFY */ static int rsl_rx_mode_modif(struct msgb *msg) { + struct abis_rsl_dchan_hdr *dch = msgb_l2(msg); struct gsm_lchan *lchan = msg->lchan; struct rsl_ie_chan_mode *cm; struct tlv_parsed tp; - int rc; rsl_tlv_parse(&tp, msgb_l3(msg), msgb_l3len(msg)); @@ -1005,12 +1004,12 @@ static int rsl_rx_mode_modif(struct msgb *msg) /* 9.3.53 MultiRate Control */ /* 9.3.54 Supported Codec Types */ - rc = bts_model_rsl_mode_modify(msg->lchan); + l1sap_chan_modify(lchan->ts->trx, dch->chan_nr); /* FIXME: delay this until L1 says OK? */ - rsl_tx_mode_modif_ack(msg->lchan); + rsl_tx_mode_modif_ack(lchan); - return rc; + return 0; } /* 8.4.20 SACCH INFO MODify */ @@ -1314,7 +1313,7 @@ static int rsl_rx_ipac_XXcx(struct msgb *msg) OSMO_RTP_P_JITBUF, btsb->rtp_jitter_buf_ms); lchan->abis_ip.rtp_socket->priv = lchan; - lchan->abis_ip.rtp_socket->rx_cb = &bts_model_rtp_rx_cb; + lchan->abis_ip.rtp_socket->rx_cb = &l1sap_rtp_rx_cb; if (connect_ip && connect_port) { /* if CRCX specifies a remote IP, we can bind() @@ -1646,13 +1645,13 @@ static int rsl_rx_dchan(struct gsm_bts_trx *trx, struct msgb *msg) ret = rsl_rx_chan_activ(msg); break; case RSL_MT_RF_CHAN_REL: - ret = rsl_rx_rf_chan_rel(msg->lchan); + ret = rsl_rx_rf_chan_rel(msg->lchan, dch->chan_nr); break; case RSL_MT_SACCH_INFO_MODIFY: ret = rsl_rx_sacch_inf_mod(msg); break; case RSL_MT_DEACTIVATE_SACCH: - ret = bts_model_rsl_deact_sacch(msg->lchan); + ret = l1sap_chan_deact_sacch(trx, dch->chan_nr); break; case RSL_MT_ENCR_CMD: ret = rsl_rx_encr_cmd(msg); diff --git a/src/common/vty.c b/src/common/vty.c index 5eddc8d..4daa92c 100644 --- a/src/common/vty.c +++ b/src/common/vty.c @@ -22,12 +22,15 @@ #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> +#include <ctype.h> #include <osmocom/core/talloc.h> #include <osmocom/gsm/abis_nm.h> #include <osmocom/vty/vty.h> #include <osmocom/vty/command.h> #include <osmocom/vty/logging.h> +#include <osmocom/vty/misc.h> +#include <osmocom/core/gsmtap.h> #include <osmocom/trau/osmo_ortp.h> @@ -42,7 +45,7 @@ #include <osmo-bts/bts_model.h> #include <osmo-bts/measurement.h> #include <osmo-bts/vty.h> - +#include <osmo-bts/l1sap.h> enum node_type bts_vty_go_parent(struct vty *vty) { @@ -171,10 +174,38 @@ DEFUN(cfg_bts_trx, cfg_bts_trx_cmd, return CMD_SUCCESS; } +/* FIXME: move to libosmocore ? */ +static char buf_casecnvt[256]; +char *osmo_str_tolower(const char *in) +{ + int len, i; + + if (!in) + return NULL; + + len = strlen(in); + if (len > sizeof(buf_casecnvt)) + len = sizeof(buf_casecnvt); + + for (i = 0; i < len; i++) { + buf_casecnvt[i] = tolower(in[i]); + if (in[i] == '\0') + break; + } + if (i < sizeof(buf_casecnvt)) + buf_casecnvt[i] = '\0'; + + /* just to make sure we're always zero-terminated */ + buf_casecnvt[sizeof(buf_casecnvt)-1] = '\0'; + + return buf_casecnvt; +} + static void config_write_bts_single(struct vty *vty, struct gsm_bts *bts) { struct gsm_bts_role_bts *btsb = bts_role_bts(bts); struct gsm_bts_trx *trx; + int i; vty_out(vty, "bts %u%s", bts->nr, VTY_NEWLINE); if (bts->description) @@ -190,6 +221,17 @@ static void config_write_bts_single(struct vty *vty, struct gsm_bts *bts) vty_out(vty, " paging lifetime %u%s", paging_get_lifetime(btsb->paging_state), VTY_NEWLINE); + for (i = 0; i < 32; i++) { + if (gsmtap_sapi_mask & (1 << i)) { + const char *name = get_value_string(gsmtap_sapi_names, i); + vty_out(vty, " gsmtap-sapi %s%s", osmo_str_tolower(name), VTY_NEWLINE); + } + } + if (gsmtap_sapi_acch) { + const char *name = get_value_string(gsmtap_sapi_names, GSMTAP_CHANNEL_ACCH); + vty_out(vty, " gsmtap-sapi %s%s", osmo_str_tolower(name), VTY_NEWLINE); + } + bts_model_config_write_bts(vty, bts); llist_for_each_entry(trx, &bts->trx_list, list) { @@ -475,6 +517,36 @@ static struct gsm_lchan *resolve_lchan(struct gsm_network *net, "logical channel commands\n" \ "logical channel number\n" +DEFUN(cfg_trx_gsmtap_sapi, cfg_trx_gsmtap_sapi_cmd, + "HIDDEN", "HIDDEN") +{ + int sapi; + + sapi = get_string_value(gsmtap_sapi_names, argv[0]); + + if (sapi == GSMTAP_CHANNEL_ACCH) + gsmtap_sapi_acch = 1; + else + gsmtap_sapi_mask |= (1 << sapi); + + return CMD_SUCCESS; +} + +DEFUN(cfg_trx_no_gsmtap_sapi, cfg_trx_no_gsmtap_sapi_cmd, + "HIDDEN", "HIDDEN") +{ + int sapi; + + sapi = get_string_value(gsmtap_sapi_names, argv[0]); + + if (sapi == GSMTAP_CHANNEL_ACCH) + gsmtap_sapi_acch = 0; + else + gsmtap_sapi_mask &= ~(1 << sapi); + + return CMD_SUCCESS; +} + DEFUN(bts_t_t_l_jitter_buf, bts_t_t_l_jitter_buf_cmd, "bts <0-0> trx <0-0> ts <0-7> lchan <0-1> rtp jitter-buffer <0-10000>", @@ -501,8 +573,58 @@ DEFUN(bts_t_t_l_jitter_buf, return CMD_SUCCESS; } -int bts_vty_init(const struct log_info *cat) +DEFUN(bts_t_t_l_loopback, + bts_t_t_l_loopback_cmd, + "bts <0-0> trx <0-0> ts <0-7> lchan <0-1> loopback", + BTS_T_T_L_STR "Set loopback\n") { + struct gsm_network *net = gsmnet_from_vty(vty); + struct gsm_lchan *lchan; + + lchan = resolve_lchan(net, argv, 0); + if (!lchan) { + vty_out(vty, "%% can't find BTS%s", VTY_NEWLINE); + return CMD_WARNING; + } + lchan->loopback = 1; + + return CMD_SUCCESS; +} + +DEFUN(no_bts_t_t_l_loopback, + no_bts_t_t_l_loopback_cmd, + "no bts <0-0> trx <0-0> ts <0-7> lchan <0-1> loopback", + NO_STR BTS_T_T_L_STR "Set loopback\n") +{ + struct gsm_network *net = gsmnet_from_vty(vty); + struct gsm_lchan *lchan; + + lchan = resolve_lchan(net, argv, 0); + if (!lchan) { + vty_out(vty, "%% can't find BTS%s", VTY_NEWLINE); + return CMD_WARNING; + } + lchan->loopback = 0; + + return CMD_SUCCESS; +} + +int bts_vty_init(struct gsm_bts *bts, const struct log_info *cat) +{ + cfg_trx_gsmtap_sapi_cmd.string = vty_cmd_string_from_valstr(bts, gsmtap_sapi_names, + "gsmtap-sapi (", + "|",")", VTY_DO_LOWER); + cfg_trx_gsmtap_sapi_cmd.doc = vty_cmd_string_from_valstr(bts, gsmtap_sapi_names, + "GSMTAP SAPI\n", + "\n", "", 0); + + cfg_trx_no_gsmtap_sapi_cmd.string = vty_cmd_string_from_valstr(bts, gsmtap_sapi_names, + "no gsmtap-sapi (", + "|",")", VTY_DO_LOWER); + cfg_trx_no_gsmtap_sapi_cmd.doc = vty_cmd_string_from_valstr(bts, gsmtap_sapi_names, + NO_STR "GSMTAP SAPI\n", + "\n", "", 0); + install_element_ve(&show_bts_cmd); logging_vty_add_cmds(cat); @@ -520,12 +642,17 @@ int bts_vty_init(const struct log_info *cat) install_element(BTS_NODE, &cfg_bts_paging_queue_size_cmd); install_element(BTS_NODE, &cfg_bts_paging_lifetime_cmd); + install_element(BTS_NODE, &cfg_trx_gsmtap_sapi_cmd); + install_element(BTS_NODE, &cfg_trx_no_gsmtap_sapi_cmd); + /* add and link to TRX config node */ install_element(BTS_NODE, &cfg_bts_trx_cmd); install_node(&trx_node, config_write_dummy); install_default(TRX_NODE); install_element(ENABLE_NODE, &bts_t_t_l_jitter_buf_cmd); + install_element(ENABLE_NODE, &bts_t_t_l_loopback_cmd); + install_element(ENABLE_NODE, &no_bts_t_t_l_loopback_cmd); return 0; } diff --git a/src/osmo-bts-sysmo/l1_if.c b/src/osmo-bts-sysmo/l1_if.c index 16f1523..6efb9d6 100644 --- a/src/osmo-bts-sysmo/l1_if.c +++ b/src/osmo-bts-sysmo/l1_if.c @@ -1303,3 +1303,9 @@ int l1if_close(struct femtol1_hdl *fl1h) l1if_transport_close(MQ_SYS_WRITE, fl1h); return 0; } + +/* temporary stub to make this patch compile */ +int bts_model_l1sap_down(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap) +{ + return -ENOTSUP; +} diff --git a/src/osmo-bts-sysmo/main.c b/src/osmo-bts-sysmo/main.c index 595a6eb..7e7f761 100644 --- a/src/osmo-bts-sysmo/main.c +++ b/src/osmo-bts-sysmo/main.c @@ -255,7 +255,7 @@ int main(int argc, char **argv) bts_log_init(NULL); vty_init(&bts_vty_info); - bts_vty_init(&bts_log_info); + bts_vty_init(bts, &bts_log_info); handle_options(argc, argv); diff --git a/src/osmo-bts-sysmo/oml.c b/src/osmo-bts-sysmo/oml.c index faef025..aeddad7 100644 --- a/src/osmo-bts-sysmo/oml.c +++ b/src/osmo-bts-sysmo/oml.c @@ -868,10 +868,8 @@ static int sapi_activate_cb(struct gsm_lchan *lchan, int status) if (lchan->state != LCHAN_S_ACT_REQ) return 0; - struct gsm_time *time; lchan_set_state(lchan, LCHAN_S_ACTIVE); - time = bts_model_get_time(lchan->ts->trx->bts); - rsl_tx_chan_act_ack(lchan, time); + rsl_tx_chan_act_ack(lchan); /* set the initial ciphering parameters for both directions */ l1if_set_ciphering(fl1h, lchan, 0); diff --git a/src/osmo-bts-sysmo/sysmobts_vty.c b/src/osmo-bts-sysmo/sysmobts_vty.c index 5bc948e..61deda4 100644 --- a/src/osmo-bts-sysmo/sysmobts_vty.c +++ b/src/osmo-bts-sysmo/sysmobts_vty.c @@ -444,33 +444,6 @@ void bts_model_config_write_bts(struct vty *vty, struct gsm_bts *bts) vty_out(vty, " auto-band%s", VTY_NEWLINE); } -/* FIXME: move to libosmocore ? */ -static char buf_casecnvt[256]; -char *osmo_str_tolower(const char *in) -{ - int len, i; - - if (!in) - return NULL; - - len = strlen(in); - if (len > sizeof(buf_casecnvt)) - len = sizeof(buf_casecnvt); - - for (i = 0; i < len; i++) { - buf_casecnvt[i] = tolower(in[i]); - if (in[i] == '\0') - break; - } - if (i < sizeof(buf_casecnvt)) - buf_casecnvt[i] = '\0'; - - /* just to make sure we're always zero-terminated */ - buf_casecnvt[sizeof(buf_casecnvt)-1] = '\0'; - - return buf_casecnvt; -} - void bts_model_config_write_trx(struct vty *vty, struct gsm_bts_trx *trx) { struct femtol1_hdl *fl1h = trx_femtol1_hdl(trx); diff --git a/tests/stubs.c b/tests/stubs.c index c46bb4a..c0089c5 100644 --- a/tests/stubs.c +++ b/tests/stubs.c @@ -46,3 +46,6 @@ int l1if_pdch_req(struct gsm_bts_trx_ts *ts, int is_ptcch, uint32_t fn, uint32_t trx_get_hlayer1(struct gsm_bts_trx *trx) { return 0; } + +int bts_model_l1sap_down(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap) +{ return 0; } -- 1.7.3.4 --------------010307000202050200040407--

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC February 2013