---
apps/osmocom_fft | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/apps/osmocom_fft b/apps/osmocom_fft
index da38861..0110d19 100755
--- a/apps/osmocom_fft
+++ b/apps/osmocom_fft
@@ -117,7 +117,7 @@ class app_top_block(stdgui2.std_top_block, pubsub):
try:
self.src.get_sample_rates().start()
except RuntimeError:
- print "Source has no sample rates (wrong device arguments?)."
+ print("Source has no sample rates (wrong device arguments?).")
sys.exit(1)
# Set the antenna
@@ -150,18 +150,18 @@ class app_top_block(stdgui2.std_top_block, pubsub):
gain_names = self.src.get_gain_names()
for name in gain_names:
range = self.src.get_gain_range(name)
- print "%s gain range: start %d stop %d step %d" % (name,
range.start(), range.stop(), range.step())
+ print("%s gain range: start %d stop %d step %d" % (name,
range.start(), range.stop(), range.step()))
if options.gains:
for tuple in options.gains.split(","):
name, gain = tuple.split(":")
gain = int(gain)
- print "Setting gain %s to %d." % (name, gain)
+ print("Setting gain %s to %d." % (name, gain))
self.src.set_gain(gain, name)
if self._verbose:
rates = self.src.get_sample_rates()
- print 'Supported sample rates %d-%d step %d.' % (rates.start(),
rates.stop(), rates.step())
+ print('Supported sample rates %d-%d step %d.' % (rates.start(),
rates.stop(), rates.step()))
if options.center_freq is None:
freq = self.src.get_center_freq()
@@ -221,7 +221,7 @@ class app_top_block(stdgui2.std_top_block, pubsub):
#force update on pubsub keys
#for key in (SAMP_RATE_KEY, BWIDTH_KEY, CENTER_FREQ_KEY, FREQ_CORR_KEY):
- #print key, "=", self[key]
+ #print(key, "=", self[key])
#self[key] = self[key]
if options.fosphor:
@@ -422,7 +422,7 @@ class app_top_block(stdgui2.std_top_block, pubsub):
try:
bw_range = self[BWIDTH_RANGE_KEY]
- #print bw_range.to_pp_string()
+ #print(bw_range.to_pp_string())
if bw_range.start() < bw_range.stop():
bwidth_vbox = forms.static_box_sizer(parent=self.panel,
label="Bandwidth",
@@ -537,14 +537,14 @@ class app_top_block(stdgui2.std_top_block, pubsub):
self.rec_file_name = self.record_to_filename()
- print "Recording samples to ", self.rec_file_name
+ print("Recording samples to ", self.rec_file_name)
self.file_sink.open(self.rec_file_name);
else:
self.sample_rate_text.Enable()
self.record_text.Enable()
self.file_sink.close()
- print "Finished recording to", self.rec_file_name
+ print("Finished recording to", self.rec_file_name)
forms.toggle_button(
sizer=rec_hbox,
@@ -732,9 +732,9 @@ class app_top_block(stdgui2.std_top_block, pubsub):
self.src.set_dc_offset( correction )
if self._verbose:
- print "Set DC offset to", correction
+ print("Set DC offset to", correction)
except RuntimeError as ex:
- print ex
+ print(ex)
def set_iq_balance_mode(self, iq_balance_mode):
if iq_balance_mode == 1:
@@ -761,16 +761,16 @@ class app_top_block(stdgui2.std_top_block, pubsub):
self.src.set_iq_balance( correction )
if self._verbose:
- print "Set IQ balance to", correction
+ print("Set IQ balance to", correction)
except RuntimeError as ex:
- print ex
+ print(ex)
def set_sample_rate(self, samp_rate):
samp_rate = self.src.set_sample_rate(samp_rate)
if hasattr(self.scope, 'set_sample_rate'):
self.scope.set_sample_rate(samp_rate)
if self._verbose:
- print "Set sample rate to:", samp_rate
+ print("Set sample rate to:", samp_rate)
try:
self[BWIDTH_KEY] = self.set_bandwidth(samp_rate)
@@ -787,13 +787,13 @@ class app_top_block(stdgui2.std_top_block, pubsub):
g = self[GAIN_RANGE_KEY(name)]
gain = float(g.start()+g.stop())/2
if self._verbose:
- print "Using auto-calculated mid-point gain"
+ print("Using auto-calculated mid-point gain")
self[GAIN_KEY(name)] = gain
return
gain = self.src.set_gain(gain, name)
if self._verbose:
- print "Set " + name + " gain to:", gain
+ print("Set " + name + " gain to:", gain)
def set_bandwidth(self, bw):
clipped_bw = self[BWIDTH_RANGE_KEY].clip(bw)
@@ -801,7 +801,7 @@ class app_top_block(stdgui2.std_top_block, pubsub):
bw = self.src.set_bandwidth(clipped_bw)
if self._verbose:
- print "Set bandwidth to:", bw
+ print("Set bandwidth to:", bw)
return bw
@@ -814,7 +814,7 @@ class app_top_block(stdgui2.std_top_block, pubsub):
f = self[FREQ_RANGE_KEY]
freq = float(f.start()+f.stop())/2.0
if self._verbose:
- print "Using auto-calculated mid-point frequency"
+ print("Using auto-calculated mid-point frequency")
self[CENTER_FREQ_KEY] = freq
return
@@ -825,22 +825,22 @@ class app_top_block(stdgui2.std_top_block, pubsub):
if freq is not None:
if self._verbose:
- print "Set center frequency to", freq
+ print("Set center frequency to", freq)
elif self._verbose:
- print "Failed to set freq."
+ print("Failed to set freq.")
return freq
def set_freq_corr(self, ppm):
if ppm is None:
ppm = 0.0
if self._verbose:
- print "Using frequency corrrection of", ppm
+ print("Using frequency corrrection of", ppm)
self[FREQ_CORR_KEY] = ppm
return
ppm = self.src.set_freq_corr(ppm)
if self._verbose:
- print "Set frequency correction to:", ppm
+ print("Set frequency correction to:", ppm)
def main ():
app = stdgui2.stdapp(app_top_block, "osmocom Spectrum Browser", nstatus=1)
--
2.24.0