OpenBSC January 2019

openbsc@lists.osmocom.org

25 participants
53 discussions

Build failed in Jenkins: Coverity-Upload (jenkins-job-builder) #356
by jenkins＠lists.osmocom.org 13 Jan '19

13 Jan '19

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/356/display/redire…> ------------------------------------------ [...truncated 723.64 KB...] CC RANAP_GeographicalArea.lo CC RANAP_GeographicalCoordinates.lo CC RANAP_GA-EllipsoidArc.lo CC RANAP_GA-AltitudeAndDirection.lo CC RANAP_GA-Point.lo CC RANAP_GA-PointWithAltitude.lo CC RANAP_GA-PointWithAltitudeAndUncertaintyEllipsoid.lo In file included from /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_IE-Extensions.h:15, from ../../include/osmocom/ranap/RANAP_GeographicalCoordinates.h:16, from ../../include/osmocom/ranap/RANAP_GA-Point.h:14, from ../../include/osmocom/ranap/RANAP_GeographicalArea.h:14, from RANAP_GeographicalArea.c:7: ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:23: warning: ‘struct Member’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct Member { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^~~~~~~~~~~~~ CC RANAP_GA-PointWithUnCertainty.lo CC RANAP_GA-PointWithUnCertaintyEllipse.lo CC RANAP_GA-Polygon.lo CC RANAP_GA-UncertaintyEllipse.lo CC RANAP_GERAN-BSC-Container.lo CC RANAP_GERAN-Cell-ID.lo CC RANAP_GERAN-Classmark.lo CC RANAP_GlobalCN-ID.lo In file included from /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_GA-Polygon.h:14, from RANAP_GA-Polygon.c:7: ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:23: warning: ‘struct Member’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct Member { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_GA-Polygon.h:26:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^~~~~~~~~~~~~ CC RANAP_GlobalRNC-ID.lo CC RANAP_GTP-TEI.lo CC RANAP_GuaranteedBitrate.lo CC RANAP_HigherBitratesThan16MbpsFlag.lo CC RANAP_HS-DSCH-MAC-d-Flow-ID.lo CC RANAP_IMEI.lo CC RANAP_IMEIGroup.lo CC RANAP_IMEIList.lo CC RANAP_IMEISV.lo CC RANAP_IMEISVGroup.lo CC RANAP_IMEISVList.lo CC RANAP_ImmediateMDT.lo CC RANAP_IMSI.lo CC RANAP_IncludeVelocity.lo CC RANAP_InformationExchangeID.lo CC RANAP_InformationExchangeType.lo CC RANAP_InformationRequested.lo CC RANAP_InformationRequestType.lo CC RANAP_InformationTransferID.lo CC RANAP_InformationTransferType.lo CC RANAP_IntegrityProtectionAlgorithm.lo CC RANAP_IntegrityProtectionInformation.lo CC RANAP_IntegrityProtectionKey.lo CC RANAP_InterSystemInformationTransferType.lo CC RANAP_InterSystemInformation-TransparentContainer.lo CC RANAP_IPMulticastAddress.lo CC RANAP_IuSignallingConnectionIdentifier.lo CC RANAP_KeyStatus.lo CC RANAP_IuTransportAssociation.lo CC RANAP_LA-LIST.lo CC RANAP_LAC.lo CC RANAP_LAI.lo In file included from /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_LA-LIST.h:14, from RANAP_LA-LIST.c:7: ../../include/osmocom/ranap/RANAP_LA-LIST.h:27:23: warning: ‘struct MemberA’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberA { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_LA-LIST.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberA { ^~~~~~~~~~~~~ CC RANAP_LastKnownServiceArea.lo CC RANAP_LastVisitedUTRANCell-Item.lo CC RANAP_LHN-ID.lo CC RANAP_Links-to-log.lo CC RANAP_ListOF-SNAs.lo CC RANAP_ListOfInterfacesToTrace.lo CC RANAP_InterfacesToTraceItem.lo CC RANAP_LoadValue.lo CC RANAP_LocationRelatedDataRequestType.lo CC RANAP_LocationRelatedDataRequestTypeSpecificToGERANIuMode.lo CC RANAP_LocationReportingTransferInformation.lo CC RANAP_ReportChangeOfSAI.lo CC RANAP_PeriodicReportingIndicator.lo CC RANAP_DirectReportingIndicator.lo CC RANAP_L3-Information.lo CC RANAP_M1Report.lo CC RANAP_M2Report.lo CC RANAP_M4Report.lo CC RANAP_M4-Collection-Parameters.lo CC RANAP_M4-Period.lo CC RANAP_M4-Threshold.lo CC RANAP_M5Report.lo CC RANAP_M5-Period.lo CC RANAP_M6Report.lo CC RANAP_M6-Period.lo CC RANAP_M7Report.lo CC RANAP_M7-Period.lo CC RANAP_Management-Based-MDT-Allowed.lo CC RANAP_MaxBitrate.lo CC RANAP_MaxSDU-Size.lo CC RANAP_MBMS-PTP-RAB-ID.lo CC RANAP_MBMSBearerServiceType.lo CC RANAP_MBMSCNDe-Registration.lo CC RANAP_MBMSCountingInformation.lo CC RANAP_MBMSHCIndicator.lo CC RANAP_MBMSIPMulticastAddressandAPNRequest.lo CC RANAP_MBMSLinkingInformation.lo CC RANAP_MBMSRegistrationRequestType.lo CC RANAP_MBMSServiceArea.lo CC RANAP_MBMSSessionDuration.lo CC RANAP_MBMSSessionIdentity.lo CC RANAP_MBMSSessionRepetitionNumber.lo CC RANAP_MDT-Activation.lo CC RANAP_MDTAreaScope.lo CC RANAP_MDT-Configuration.lo CC RANAP_MDTMode.lo CC RANAP_MDT-PLMN-List.lo CC RANAP_MDT-Report-Parameters.lo CC RANAP_MeasurementQuantity.lo CC RANAP_MeasurementsToActivate.lo CC RANAP_MSISDN.lo CC RANAP_NAS-SequenceNumber.lo CC RANAP_NAS-PDU.lo CC RANAP_NAS-SynchronisationIndicator.lo CC RANAP_NewBSS-To-OldBSS-Information.lo CC RANAP_NonSearchingIndication.lo CC RANAP_NRTLoadInformationValue.lo CC RANAP_NumberOfIuInstances.lo CC RANAP_NumberOfSteps.lo CC RANAP_Offload-RAB-Parameters.lo CC RANAP_Offload-RAB-Parameters-APN.lo CC RANAP_Offload-RAB-Parameters-ChargingCharacteristics.lo CC RANAP_OldBSS-ToNewBSS-Information.lo CC RANAP_OMC-ID.lo CC RANAP_Out-Of-UTRAN.lo CC RANAP_PagingAreaID.lo CC RANAP_PagingCause.lo CC RANAP_PDP-TypeInformation.lo CC RANAP_PDP-Type.lo CC RANAP_PDP-TypeInformation-extension.lo CC RANAP_PDP-Type-extension.lo CC RANAP_PDUType14FrameSequenceNumber.lo CC RANAP_PeriodicLocationInfo.lo CC RANAP_PermanentNAS-UE-ID.lo CC RANAP_PermittedEncryptionAlgorithms.lo CC RANAP_PermittedIntegrityProtectionAlgorithms.lo CC RANAP_LABased.lo CC RANAP_LAI-List.lo CC RANAP_LoggedMDT.lo CC RANAP_LoggingInterval.lo CC RANAP_LoggingDuration.lo CC RANAP_PLMNidentity.lo CC RANAP_PLMNs-in-shared-network.lo CC RANAP_Port-Number.lo CC RANAP_PositioningDataDiscriminator.lo CC RANAP_PositioningDataSet.lo CC RANAP_PositioningMethodAndUsage.lo In file included from /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:14, from RANAP_PLMNs-in-shared-network.c:7: ../../include/osmocom/ranap/RANAP_LA-LIST.h:27:23: warning: ‘struct MemberA’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberA { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_LA-LIST.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberA { ^~~~~~~~~~~~~ ../../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:27:23: warning: ‘struct MemberM’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberM { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberM { ^~~~~~~~~~~~~ CC RANAP_PositioningPriority.lo CC RANAP_PositionData.lo CC RANAP_PositionDataSpecificToGERANIuMode.lo CC RANAP_Pre-emptionCapability.lo CC RANAP_Pre-emptionVulnerability.lo CC RANAP_PriorityLevel.lo CC RANAP_Priority-Class-Indicator.lo CC RANAP_ProvidedData.lo CC RANAP_P-TMSI.lo /bin/bash: line 1: 2491 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"osmo-iuh\" -DPACKAGE_TARNAME=\"osmo-iuh\" -DPACKAGE_VERSION=\"0.3.0.13-45696\" -DPACKAGE_STRING=\"osmo-iuh\ 0.3.0.13-45696\" -DPACKAGE_BUGREPORT=\"openbsc(a)lists.osmocom.org\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE=\"osmo-iuh\" -DVERSION=\"0.3.0.13-45696\" -DSTDC_HEADERS=1 -I. -Wall -I../../include -I/home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/ -I/home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c -I/home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/ -g -O2 -Wall -MT RANAP_PriorityLevel.lo -MD -MP -MF .deps/RANAP_PriorityLevel.Tpo -c -o RANAP_PriorityLevel.lo RANAP_PriorityLevel.c Makefile:2506: recipe for target 'RANAP_PriorityLevel.lo' failed make[4]: *** [RANAP_PriorityLevel.lo] Error 132 make[4]: *** Waiting for unfinished jobs.... In file included from /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:14, from ../../include/osmocom/ranap/RANAP_Shared-Network-Information.h:14, from ../../include/osmocom/ranap/RANAP_ProvidedData.h:14, from RANAP_ProvidedData.c:7: ../../include/osmocom/ranap/RANAP_LA-LIST.h:27:23: warning: ‘struct MemberA’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberA { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_LA-LIST.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberA { ^~~~~~~~~~~~~ ../../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:27:23: warning: ‘struct MemberM’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberM { ^ /home/osmocom-build/osmo-ci/coverity/install-Osmocom/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberM { ^~~~~~~~~~~~~ make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-iuh/src/ranap' Makefile:642: recipe for target 'all-recursive' failed make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-iuh/src' Makefile:454: recipe for target 'all' failed make[2]: *** [all] Error 2 make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-iuh/src' Makefile:458: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-iuh' Makefile:382: recipe for target 'all' failed make: *** [all] Error 2 [WARNING] Build command ./build_Osmocom.sh exited with code 2. Please verify that the build completed successfully. Emitted 1161 C/C++ compilation units (100%) successfully 1161 C/C++ compilation units (100%) are ready for analysis For more details, please look at: /home/osmocom-build/osmo-ci/coverity/source-Osmocom/cov-int/build-log.txt Build step 'Execute shell' marked build as failure

1 1

Status of 2-bts osmobts @ gullik
by Gullik Webjorn 11 Jan '19

11 Jan '19

Just a short update: Orange Pi Zero (armhf) + Ettus B100 ARFCN 871 osmo-trx-uhd_0.4.0.124 unstable after 5-120 minutes. Supermicro I386 + Limesdr mini ARFCN 881 osmo-trx-lms_0.4.0_i386 (built from latest source ) relatively stable. Incoming and outgoing calls OK. PSTN access OK. Sometimes fails with "communication error" as displayed on Nokia, main suspicion is failed trx-uhd ( without handover) will investigate further. Not sure which BTS it was on. As for LimeSDR mini support, best so far, has run overnight. Gullik

2 3

OsmoTRX - osmo-trx-usrp-1 Aborted :: Assertion 'px != 0' failed
by Sergey Mayzus 11 Jan '19

11 Jan '19

2 2

Some progress and some questions....
by Gullik Webjorn 10 Jan '19

10 Jan '19

I have now built osmo-trx-lms and osmo-bts-trx from source on an i386 platform. I have beacon, and two phones registered, the configuration from msc and up is the one I had three weeks ago, which more or less worked, but with large stability problems. I guess *this* report is the most interesting for you now.... I build from the "master", and target debian9 on i386. I have not been able to make a call yet, possibly because I might have messed up some library the MSC is dependent on, but I will work on that. What is interesting is that bts 0 trx 0 is running trx-uhd with a B100, and seems quite stable. Moreover, bts 1 trx 0 is running on the i386 and seems happy so far, after 30 minutes. This is Limesdr mini. I have just copied the bts0 to trx 0 section from my original config, duplicated it and changed bts0 to bts1, and the ipa unit-id 1805 0, and of course the ip addresses. I will comment the various lines in my configs, as I have understood them, and look forward to your comments, or maybe a keyword list explaining what each parameter is used for. ! osmo-bsc default configuration ! (assumes STP to run on 127.0.0.1 and uses default point codes) ! e1_input e1_line 0 driver ipa network network country code 1 mobile network code 1 encryption a5 0 neci 1 paging any use tch 0 handover 0 handover algorithm 1 handover1 window rxlev averaging 10 handover1 window rxqual averaging 1 handover1 window rxlev neighbor averaging 10 handover1 power budget interval 6 handover1 power budget hysteresis 3 handover1 maximum distance 9999 dyn_ts_allow_tch_f 0 periodic location update 30 ! here is the first bts - trx section. The ip.access id must match the one in the BTS, where it is called ipa. bts 0 type sysmobts band DCS1800 cell_identity 0 location_area_code 1 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending forbidden ip.access unit_id 1801 0 oml ip.access stream_id 255 line 0 codec-support fr gprs mode none trx 0 rf_locked 0 arfcn 871 nominal power 20 ! to use full TRX power, set max_power_red 0 max_power_red 3 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 ! this is BTS1. The ! osmo-bsc default configuration ! (assumes STP to run on 127.0.0.1 and uses default point codes) ! e1_input e1_line 0 driver ipa network network country code 1 mobile network code 1 encryption a5 0 neci 1 paging any use tch 0 handover 0 handover algorithm 1 handover1 window rxlev averaging 10 handover1 window rxqual averaging 1 handover1 window rxlev neighbor averaging 10 handover1 power budget interval 6 handover1 power budget hysteresis 3 handover1 maximum distance 9999 dyn_ts_allow_tch_f 0 periodic location update 30 *bts 0** *** type sysmobts band DCS1800 cell_identity 0 location_area_code 1 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending forbidden * ip.access unit_id 1801 0** * oml ip.access stream_id 255 line 0 codec-support fr gprs mode none trx 0 rf_locked 0 * arfcn 871** * nominal power 20 ! to use full TRX power, set max_power_red 0 max_power_red 3 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 *bts 1** *** type sysmobts band DCS1800 cell_identity 0 location_area_code 1 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending forbidden * ip.access unit_id 1805 0** * oml ip.access stream_id 255 line 0 codec-support fr gprs mode none trx 0 rf_locked 0 * arfcn 881** * nominal power 20 ! to use full TRX power, set max_power_red 0 max_power_red 3 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 no bsc-welcome-text no bsc-msc-lost-text no bsc-grace-text type normal allow-emergency allow amr-config 12_2k forbidden amr-config 10_2k forbidden amr-config 7_95k forbidden amr-config 7_40k forbidden amr-config 6_70k forbidden amr-config 5_90k allowed amr-config 5_15k forbidden amr-config 4_75k forbidden codec-list fr1 fr2 fr3 hr1 hr3 mgw remote-ip 127.0.0.1 mgw remote-port 2427 mgw local-port 2727 mgw endpoint-range 1 31 bsc mid-call-timeout 0 no missing-msc-text Does this look OK to you?? Regards, Gullik

1 1

Build failed in Jenkins: Coverity-Upload (jenkins-job-builder) #352
by jenkins＠lists.osmocom.org 09 Jan '19

09 Jan '19

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/352/display/redire…> ------------------------------------------ [...truncated 1.15 MB...] CC libarch_sse_4_1_la-convert_sse_4_1.lo CCLD libarch_sse_4_1.la CCLD libarch_sse_3.la ar: `u' modifier ignored since `D' is the default (see `U') ar: `u' modifier ignored since `D' is the default (see `U') CCLD libarch.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/x86' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' Making all in device make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' Making all in uhd make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device/uhd' CXX UHDDevice.lo CXXLD libdevice.la ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device/uhd' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' CXX radioVector.lo CXX radioClock.lo CXX Transceiver.lo CXX signalVector.lo CXX ChannelizerBase.lo CXX radioBuffer.lo CXX sigProcLib.lo CXX radioInterface.lo CXX Channelizer.lo CXX Synthesis.lo CXX Resampler.lo CXX radioInterfaceResamp.lo CXX radioInterfaceMulti.lo CXX osmo_trx_uhd-osmo-trx.o CXXLD libtransceiver_common.la ar: `u' modifier ignored since `D' is the default (see `U') CXXLD osmo-trx-uhd make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' Making all in contrib make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' Making all in systemd make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib/systemd' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib/systemd' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' Making all in tests make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' Making all in CommonLibs make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/CommonLibs' CXX PRBSTest.o CXX BitVectorTest.o CXX SocketsTest.o CXX InterthreadTest.o CXX TimevalTest.o CXX LogTest.o CXX VectorTest.o CXXLD BitVectorTest CXXLD VectorTest CXXLD TimevalTest CXXLD SocketsTest CXXLD LogTest CXXLD PRBSTest CXXLD InterthreadTest make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/CommonLibs' Making all in Transceiver52M make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/Transceiver52M' CC convolve_test-convolve_test.o CCLD convolve_test make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/Transceiver52M' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' + make install Making install in doc make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc' Making install in examples make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/examples' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/examples' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/etc/osmocom' /usr/bin/install -c -m 644 osmo-trx-uhd/osmo-trx-uhd.cfg '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/etc/osmocom' make install-data-hook make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/examples' for f in $(find . -type f -name '*.cfg*' | sed -e 's,^.,,'); do \ j="/home/osmocom-build/osmo-ci/coverity/install-Osmocom/share/doc/osmo-trx/examples/$f" && \ mkdir -p "$(dirname $j)" && \ /usr/bin/install -c -m 644 ./$f $j; \ done make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/examples' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/examples' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/examples' Making install in manuals make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/manuals' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/manuals' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/manuals' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc/manuals' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/doc' Making install in CommonLibs make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/CommonLibs' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/CommonLibs' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/CommonLibs' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/CommonLibs' Making install in GSM make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/GSM' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/GSM' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/GSM' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/GSM' Making install in Transceiver52M make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' Making install in arch make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' Making install in common make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/common' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/common' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/common' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/common' Making install in x86 make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/x86' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/x86' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/x86' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch/x86' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/arch' Making install in device make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' Making install in uhd make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device/uhd' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device/uhd' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device/uhd' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device/uhd' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[4]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M/device' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-trx-uhd '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin' libtool: install: /usr/bin/install -c osmo-trx-uhd /home/osmocom-build/osmo-ci/coverity/install-Osmocom/bin/osmo-trx-uhd /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/share/usrp/rev2' /usr/bin/install -c -m 644 std_inband.rbf '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/share/usrp/rev2' /bin/mkdir -p '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/share/usrp/rev4' /usr/bin/install -c -m 644 std_inband.rbf '/home/osmocom-build/osmo-ci/coverity/install-Osmocom/share/usrp/rev4' make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/Transceiver52M' Making install in contrib make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' Making install in systemd make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib/systemd' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib/systemd' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib/systemd' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib/systemd' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/contrib' Making install in tests make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' Making install in CommonLibs make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/CommonLibs' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/CommonLibs' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/CommonLibs' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/CommonLibs' Making install in Transceiver52M make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/Transceiver52M' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/Transceiver52M' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/Transceiver52M' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests/Transceiver52M' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[3]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx/tests' make[1]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' make[2]: Entering directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/osmo-trx' + popd ~/osmo-ci/coverity/source-Osmocom Emitted 2332 C/C++ compilation units (100%) successfully 2332 C/C++ compilation units (100%) are ready for analysis The cov-build utility completed successfully. + cd /home/osmocom-build/osmo-ci/coverity/source-Osmocom + rm -f Osmocom.tgz + tar czf Osmocom.tgz cov-int + set +x curl \ --form token="$token" \ --form email=holger(a)freyther.de --form file=(a)Osmocom.tgz \ --form version=Version --form description=AutoUpload \ https://scan.coverity.com/builds?project=Osmocom % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (51) SSL: no alternative certificate subject name matches target host name 'scan.coverity.com' Build step 'Execute shell' marked build as failure

1 1

Limesdr mini and nightly builds....
by Gullik Webjorn 07 Jan '19

07 Jan '19

Hi, I have just received a limesdr mini, and I am trying to get that sdr to the same level as I had with uhd B100. I managed to get the whole config working properly, but stability was bad, as you have read. As I was recommended, I have been runnig "nightly" binaries, and see where I end up.... :-) limesdr installed in Orange Pi Zero, (armhf). Limesuite 18.10.0-1, LimeUtil seems happy, and I can see the SDR However, I cannot get stability enough to get a stable signal.... Gullik TRX LIME CONFIG log stderr logging filter all 1 logging color 1 logging print category 1 logging timestamp 1 logging print file basename logging level set-all info ! line vty no login ! trx bind-ip 127.0.0.1 remote-ip 127.0.0.1 base-port 5700 egprs disable tx-sps 4 rx-sps 4 rt-prio 18 chan 0 tx-path BAND1 rx-path LNAW bsc 1.3.0.287 or .284 will not run, fails with error in sysmalloc(), so I try running .283, from dec 19.... maybe this problem is armhf related...?? this is the bsc config...... osmobsc config file ! osmo-bsc default configuration ! (assumes STP to run on 127.0.0.1 and uses default point codes) ! e1_input e1_line 0 driver ipa network network country code 1 mobile network code 1 encryption a5 0 neci 1 paging any use tch 0 handover 0 handover algorithm 1 handover1 window rxlev averaging 10 handover1 window rxqual averaging 1 handover1 window rxlev neighbor averaging 10 handover1 power budget interval 6 handover1 power budget hysteresis 3 handover1 maximum distance 9999 dyn_ts_allow_tch_f 0 periodic location update 30 bts 0 type sysmobts band DCS1800 cell_identity 0 location_area_code 1 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending forbidden ip.access unit_id 1801 0 oml ip.access stream_id 255 line 0 codec-support fr gprs mode none trx 0 rf_locked 0 arfcn 871 nominal power 20 ! to use full TRX power, set max_power_red 0 max_power_red 3 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 no bsc-welcome-text no bsc-msc-lost-text no bsc-grace-text type normal allow-emergency allow amr-config 12_2k forbidden amr-config 10_2k forbidden amr-config 7_95k forbidden amr-config 7_40k forbidden amr-config 6_70k forbidden amr-config 5_90k allowed amr-config 5_15k forbidden amr-config 4_75k forbidden codec-list fr1 fr2 fr3 hr1 hr3 mgw remote-ip 127.0.0.1 mgw remote-port 2427 mgw local-port 2727 mgw endpoint-range 1 31 bsc mid-call-timeout 0 no missing-msc-text bsc does not seem to want to speak with trx-lms, I don't understand which config entry is wrong.... osmo_bsc_main.c:284 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 871 using MCC-MNC 001-01 LAC=1 CID=0 BSIC=63 <0007> a_reset.c:106 A-RESET(msc-0)[0xdb2e98]{DISC}: (re)sending BSSMAP RESET message... <0007> osmo_bsc_sigtran.c:93 Sending RESET to MSC: RI=SSN_PC,PC=0.23.1,SSN=BSSAP <0007> osmo_bsc_bssap.c:58 RESET ACK from MSC: RI=SSN_PC,PC=0.23.1,SSN=BSSAP <0007> a_reset.c:74 A-RESET(msc-0)[0xdb2e98]{DISC}: SIGTRAN connection succeded. <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-0-CCCH_SDCCH4)[0xddfcd8]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-1-TCH_F)[0xde0038]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-2-TCH_F)[0xde0398]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-3-TCH_F)[0xde06f8]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-4-TCH_F)[0xde0a58]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-5-TCH_F)[0xde0db8]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-6-TCH_F)[0xde1118]{UNUSED}: Event TS_EV_OML_READY not permitted <0011> bts_ipaccess_nanobts.c:315 timeslot(0-0-7-TCH_F)[0xde1478]{UNUSED}: Event TS_EV_OML_READY not permitted <0015> input/ipaccess.c:248 Sign link vanished, dead socket <0015> input/ipaccess.c:74 Forcing socket shutdown with no signal link set <0015> bts_ipaccess_nanobts.c:416 (bts=0) Dropping OML link. <0015> bts_ipaccess_nanobts.c:397 (bts=0,trx=0) Dropping RSL link. <0015> input/ipa.c:262 accept()ed new link from 127.0.0.1 to port 3002 <0004> abis_nm.c:538 BTS0 feature 'EGPRS' reported via OML does not match statically set feature: 0 != 1. Please fix. <0004> abis_nm.c:538 BTS0 feature 'OML Alerts' reported via OML does not match statically set feature: 1 != 0. Please fix. So, has anyone config files for Limesdr mini -> trx-lms -> osmo-bts-trx_0.8.1.199 -> osmo-msc or can point me in the right direction.... Gullik

3 13

Please be aware: doxygen: confusion about \ref and \a
by Neels Hofmeyr 07 Jan '19

07 Jan '19

Researching for a discussion at https://gerrit.osmocom.org/c/libosmocore/+/12384 made me realize that our use of doxygen keywords is currently confused. TLDR: - Links to structs, members and functions are implicit in doxygen. - Don't use '\ref', except to link to sections or files. - Don't use '\a', it is merely cosmetic and breaks reading flow for some. Details: (*) We are often using '\ref' wrongly, and also '\a' is merely cosmetic. Example: osmo_crc16(), see param 'len' intending to reference the 'buffer' param: /*! Compute 16bit CCITT polynome 0x8408 (x^0 + x^5 + x^12) over given buffer. * \param crc[in] previous CRC value * \param buffer[in] data pointer * \param len[in] number of bytes in input \ref buffer * \return updated CRC value */ uint16_t osmo_crc16(uint16_t crc, uint8_t const *buffer, size_t len) ... It looks perfectly sane, but this is wrong for more than one reason: - '\ref' is not actually about code elements. It is about referencing pages or code sections. See http://www.doxygen.nl/manual/commands.html#cmdref "Creates a reference to a named section, subsection, page or anchor." Doxygen complains with e.g.: "gsmtap_util.c:192: warning: unable to resolve reference to `data' for \ref command" Luckily '\ref' doesn't break implicit linking, which is probably why the misconception that we need to include them arose in the first place. - There *AREN'T* any references to function arguments at all!! It is not possible in doxygen to create a formal link to a function argument. You can reference struct members, functions, ... but not arguments. API code often uses '\a' (at least 320 times in libosmocore), but that does not add a formal link, either. '\a' is only and simply putting a term in italics. http://www.doxygen.nl/manual/commands.html#cmda There are currently at least 260 uses of '\ref' in libosmocore, of which only a few are correct. An example of correct use is gsmtap_source_init(): http://ftp.osmocom.org/api/latest/libosmocore/core/html/group__gsmtap.html#… /*! [...] integrated with libosmocore \ref select */ which renders as integrated with libosmocore [Select loop abstraction] Ironically, the same gsmtap_source_init() also includes examples of incorrect use, ignore those for this argument, please. (*) Hyperlinks are fully automatic and implicit. Notice that formal links are detected automatically, without the need for an explicit doxygen marker. For example, look at the API doc for osmo_cgi_name2(): http://ftp.osmocom.org/api/latest/libosmocore/gsm/html/gsm23003_8c.html#af9… It has a link to osmo_cgi_name(), with a doxygen source of /*! Same as osmo_cgi_name(), but uses a different static buffer. [...] I will hence continue to omit '\a' and '\ref', and will actually ask patch submitters to omit them in code review. ~N

2 1

Adding priority for EMLPP service in paging type 1
by Snehasish Kar 07 Jan '19

07 Jan '19

Hello Everyone I was trying to set priority bit in paging type 1. I tried modifying the function rsl_paging_cmd in abis_rsl.c . But when i am checking the same in wireshark, I couldn't view it. Any help on this. BR

3 7

pysim-read errors
by devifr 07 Jan '19

07 Jan '19

All, I have the following error when I run pySim-read.py: Traceback (most recent call last): File "pySim-read.py", line 86, in <module> sl = SerialSimLink(device=opts.device, baudrate=opts.baudrate) File "/home/macbook/Desktop/pyscard-1.9.7/pysim/pySim/transport/serial.py", line 45, in __init__ baudrate = baudrate, File "/home/macbook/.local/lib/python2.7/site-packages/serial/serialutil.py", line 240, in __init__ self.open() File "/home/macbook/.local/lib/python2.7/site-packages/serial/serialposix.py", line 268, in open raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0' Exception AttributeError: "'SerialSimLink' object has no attribute '_sl'" in <bound method SerialSimLink.__del__ of <pySim.transport.serial.SerialSimLink object at 0x7ff879094d10>> ignored I'm no Linux and/or Python guru but from what I can gather is that it's having issues with identifying the card reader on dev/ttyUSB0. To address that issue, I've confirmed my current card reader (identiv SCR3310) is working when I've ran the pcsc_scan script: PC/SC device scanner V 1.5.2 (c) 2001-2017, Ludovic Rousseau <ludovic.rousseau(a)free.fr> Using reader plug'n play mechanism Scanning present readers... 0: SCR3310 Smart Card Reader [CCID Interface] (53311828708432) 00 00 Wed Jan 2 12:02:36 2019 Reader 0: SCR3310 Smart Card Reader [CCID Interface] (53311828708432) 00 00 Card state: Card inserted, ATR: 3B 9F 95 80 1F C3 80 31 E0 73 FE 21 13 57 86 81 02 86 98 44 18 A8 ATR: 3B 9F 95 80 1F C3 80 31 E0 73 FE 21 13 57 86 81 02 86 98 44 18 A8 + TS = 3B --> Direct Convention + T0 = 9F, Y(1): 1001, K: 15 (historical bytes) TA(1) = 95 --> Fi=512, Di=16, 32 cycles/ETU 125000 bits/s at 4 MHz, fMax for Fi = 5 MHz => 156250 bits/s TD(1) = 80 --> Y(i+1) = 1000, Protocol T = 0 ----- TD(2) = 1F --> Y(i+1) = 0001, Protocol T = 15 - Global interface bytes following ----- TA(3) = C3 --> Clock stop: no preference - Class accepted by the card: (3G) A 5V B 3V + Historical bytes: 80 31 E0 73 FE 21 13 57 86 81 02 86 98 44 18 Category indicator byte: 80 (compact TLV data object) Tag: 3, len: 1 (card service data byte) Card service data byte: E0 - Application selection: by full DF name - Application selection: by partial DF name - BER-TLV data objects available in EF.DIR - EF.DIR and EF.ATR access services: by GET RECORD(s) command - Card with MF Tag: 7, len: 3 (card capabilities) Selection methods: FE - DF selection by full DF name - DF selection by partial DF name - DF selection by path - DF selection by file identifier - Implicit DF selection - Short EF identifier supported - Record number supported Data coding byte: 21 - Behaviour of write functions: proprietary - Value 'FF' for the first byte of BER-TLV tag fields: invalid - Data unit in quartets: 2 Command chaining, length fields and logical channels: 13 - Logical channel number assignment: by the card - Maximum number of logical channels: 4 Tag: 5, len: 7 (card issuer's data) Card issuer data: 86 81 02 86 98 44 18 + TCK = A8 (correct checksum) Possibly identified card (using /usr/share/pcsc/smartcard_list.txt): 3B 9F 95 80 1F C3 80 31 E0 73 FE 21 13 57 86 81 02 86 98 44 18 A8 GREEN CARD, Grcard (Hong Kong ) Co.,Limited, LTE Usim Card (Telecommunication) Celcom Postpaid 3G (Telecommunication) Additionally, I've ran the following command (dmesg | tail -6) to determine what path my card reader is mounted to: macbook@ubuntu:~/Desktop/pyscard-1.9.7/pysim$ dmesg | tail -n 6 [ 7079.120203] usb 3-3.1: new full-speed USB device number 6 using xhci_hcd [ 7079.223962] usb 3-3.1: New USB device found, idVendor=04e6, idProduct=5116 [ 7079.223965] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 7079.223968] usb 3-3.1: Product: SCR33xx v2.0 USB SC Reader [ 7079.223969] usb 3-3.1: Manufacturer: Identive [ 7079.223971] usb 3-3.1: SerialNumber: 53311828708432 My questions are this, is there a known work around for this errors that I've posted above? Also, if my card is not mounting to dev/ttyUSB0, where do they mount to? I've looked in /mnt, /media as well as /dev....no joy. I've searched the Open BSC archives as well as scoured the web for an answer to this issue and I'm coming up blank. One last thing, I've ran this python script on an Ubuntu VM and Dual Boot. Same issue both machines. I've also tried this script with an Alcor card reader. Same output. Any help is greatly appreciated. Thanks, Derek

2 2

got traces for inter-MSC Handover?
by Neels Hofmeyr 06 Jan '19

06 Jan '19

Hi all, my current task is implementing inter-MSC Handover for OsmoMSC. It would be immensely helpful to look at network traces of the messages carrying out an inter-MSC handover. Primarily for 2G (BSSAP), but 3G (RANAP) might also be interesting. The part on the A-interface (BSSAP) is interesting for both the outgoing (orig. MSC and BSS) as well as the incoming (remote MSC and BSS) sides. Most interesting would be some kind of trace of communication between the two MSCs, the E-interface (MAP) negotiating the HO as well as the call forwarding between the two MSCs, if at all available. We are exploring various avenues to obtain inter-MSC HO traces, so far to no avail. If anyone reading this is able to help out, that would be highly appreciated and super helpful to be interoperable. Thanks! ~N -- - Neels Hofmeyr <nhofmeyr(a)sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

OpenBSC January 2019