osmocom-sdr February 2018

osmocom-sdr@lists.osmocom.org

11 participants
16 discussions

Start a nNew thread

gr-osmosdr: add clock_source= parameter
by Michael Loeffler 26 Mar '21

26 Mar '21

Hello, the attached patch allows to set the clock_source on uhd devices in programs like gqrx. Bye

1 1

[PATCH] gr-osmosdr Microtelecom Perseus HF receiver support (II)
by andrea.montefusco＠gmail.com 16 Aug '18

16 Aug '18

Second attempt: I removed all the changes not related to Perseus. @Sylvain: thanks for take time to review. --- CMakeLists.txt | 1 + cmake/Modules/FindLibPERSEUS.cmake | 24 ++ lib/CMakeLists.txt | 8 + lib/config.h.in | 1 + lib/device.cc | 8 + lib/perseus/CMakeLists.txt | 37 +++ lib/perseus/perseus_source_c.cc | 613 +++++++++++++++++++++++++++++++++++++ lib/perseus/perseus_source_c.h | 135 ++++++++ lib/source_impl.cc | 18 +- 9 files changed, 844 insertions(+), 1 deletion(-) create mode 100644 cmake/Modules/FindLibPERSEUS.cmake create mode 100644 lib/perseus/CMakeLists.txt create mode 100644 lib/perseus/perseus_source_c.cc create mode 100644 lib/perseus/perseus_source_c.h diff --git a/CMakeLists.txt b/CMakeLists.txt index 296456d..94acd4c 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -173,6 +173,7 @@ find_package(Volk) find_package(LibbladeRF) find_package(SoapySDR NO_MODULE) find_package(LibFreeSRP) +find_package(LibPERSEUS) find_package(Doxygen) if(NOT GNURADIO_RUNTIME_FOUND) diff --git a/cmake/Modules/FindLibPERSEUS.cmake b/cmake/Modules/FindLibPERSEUS.cmake new file mode 100644 index 0000000..5477327 --- /dev/null +++ b/cmake/Modules/FindLibPERSEUS.cmake @@ -0,0 +1,24 @@ +INCLUDE(FindPkgConfig) +PKG_CHECK_MODULES(PC_LIBPERSEUS libperseus-sdr) + +FIND_PATH( + LIBPERSEUS_INCLUDE_DIRS + NAMES perseus-sdr.h + HINTS $ENV{LIBPERSEUS_DIR}/include + ${PC_LIBPERSEUS_INCLUDEDIR} + PATHS /usr/local/include + /usr/include +) + +FIND_LIBRARY( + LIBPERSEUS_LIBRARIES + NAMES perseus-sdr + HINTS $ENV{LIBPERSEUS_DIR}/lib + ${PC_LIBPERSEUS_LIBDIR} + PATHS /usr/local/lib + /usr/lib +) + +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBPERSEUS DEFAULT_MSG LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) +MARK_AS_ADVANCED(LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) diff --git a/lib/CMakeLists.txt b/lib/CMakeLists.txt index c05b8d9..f555816 100644 --- a/lib/CMakeLists.txt +++ b/lib/CMakeLists.txt @@ -249,6 +249,14 @@ GR_INCLUDE_SUBDIRECTORY(freesrp) endif(ENABLE_FREESRP) ######################################################################## +# Setup PERSEUS component +######################################################################## +GR_REGISTER_COMPONENT("Microtelecom Perseus Receiver" ENABLE_PERSEUS LIBPERSEUS_FOUND) +if(ENABLE_PERSEUS) +GR_INCLUDE_SUBDIRECTORY(perseus) +endif(ENABLE_PERSEUS) + +######################################################################## # Setup configuration file ######################################################################## ADD_DEFINITIONS(-DHAVE_CONFIG_H=1) diff --git a/lib/config.h.in b/lib/config.h.in index 42e72f1..dac7e39 100644 --- a/lib/config.h.in +++ b/lib/config.h.in @@ -19,6 +19,7 @@ #cmakedefine ENABLE_SOAPY #cmakedefine ENABLE_REDPITAYA #cmakedefine ENABLE_FREESRP +#cmakedefine ENABLE_PERSEUS //provide NAN define for MSVC older than VC12 #if defined(_MSC_VER) && (_MSC_VER < 1800) diff --git a/lib/device.cc b/lib/device.cc index 025a22b..df0d734 100644 --- a/lib/device.cc +++ b/lib/device.cc @@ -90,6 +90,10 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif + #include "arg_helpers.h" using namespace osmosdr; @@ -194,6 +198,10 @@ devices_t device::find(const device_t &hint) BOOST_FOREACH( std::string dev, soapy_source_c::get_devices() ) devices.push_back( device_t(dev) ); #endif +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + devices.push_back( device_t(dev) ); +#endif /* software-only sources should be appended at the very end, * hopefully resulting in hardware sources to be shown first diff --git a/lib/perseus/CMakeLists.txt b/lib/perseus/CMakeLists.txt new file mode 100644 index 0000000..f45a10d --- /dev/null +++ b/lib/perseus/CMakeLists.txt @@ -0,0 +1,37 @@ +# Copyright 2017 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +include_directories( + ${CMAKE_CURRENT_SOURCE_DIR} + ${LIBPERSEUS_INCLUDE_DIRS} +) + +set(perseus_srcs + ${CMAKE_CURRENT_SOURCE_DIR}/perseus_source_c.cc +) + +######################################################################## +# Append gnuradio-osmosdr library sources +######################################################################## +list(APPEND gr_osmosdr_srcs ${perseus_srcs}) +list(APPEND gr_osmosdr_libs ${LIBPERSEUS_LIBRARIES} ${GNURADIO_BLOCKS_LIBRARIES}) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_c.cc new file mode 100644 index 0000000..bf7c9be --- /dev/null +++ b/lib/perseus/perseus_source_c.cc @@ -0,0 +1,613 @@ +/* -*- c++ -*- */ +/* + * Copyright 2018 Andrea Montefusco IW0HDV + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * config.h is generated by configure. It contains the results + * of probing for features, options etc. It should be the first + * file included in your .cc file. + */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdexcept> +#include <iostream> +#include <algorithm> + +#include <boost/assign.hpp> +#include <boost/format.hpp> +#include <boost/detail/endian.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/thread/thread.hpp> + +#include <gnuradio/io_signature.h> + +#include "perseus_source_c.h" +#include "arg_helpers.h" + + + +using namespace boost::assign; + +#define PERSEUS_FORMAT_ERROR(ret, msg) \ + boost::str( boost::format(msg " (%1%)") % ret ) + +#define PERSEUS_THROW_ON_ERROR(ret, msg) \ + if ( ret != PERSEUS_NOERROR ) \ + { \ + throw std::runtime_error( PERSEUS_FORMAT_ERROR(ret, msg) ); \ + } + +#define PERSEUS_FUNC_STR(func, arg) \ + boost::str(boost::format(func "(%1%)") % arg) + " has failed" + +perseus_source_c_sptr make_perseus_source_c (const std::string & args) +{ + return gnuradio::get_initial_sptr(new perseus_source_c (args)); +} + +/* + * Specify constraints on number of input and output streams. + * This info is used to construct the input and output signatures + * (2nd & 3rd args to gr::block's constructor). The input and + * output signatures are used by the runtime system to + * check that a valid number and type of inputs and outputs + * are connected to this block. In this case, we accept + * only 0 input and 1 output. + */ +static const int MIN_IN = 0; // mininum number of input streams +static const int MAX_IN = 0; // maximum number of input streams +static const int MIN_OUT = 1; // minimum number of output streams +static const int MAX_OUT = 1; // maximum number of output streams + +/* + * The private constructor + */ +perseus_source_c::perseus_source_c (const std::string &args) + : gr::sync_block ("perseus_source_c", + gr::io_signature::make(MIN_IN, MAX_IN, sizeof (gr_complex)), + gr::io_signature::make(MIN_OUT, MAX_OUT, sizeof (gr_complex))), + _dev(NULL), + _sample_rate(0), + _center_freq(0), + _freq_corr(0), + _frun(false), + _cnt(0), + _att_value(0), + _adc_preamp(false), + _adc_dither(false), + _preselector(false) +{ + dict_t dict = params_to_dict(args); + + _dev = NULL; + + // Set debug info dumped to stderr to the maximum verbose level + perseus_set_debug(3); + + // Check how many Perseus receivers are connected to the system + int num_perseus = perseus_init(); + std::cerr << "## Microtelecom Perseus ctor: " << num_perseus << " Perseus receivers found." << std::endl; + + if (num_perseus==0) { + perseus_exit(); + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "No Perseus receivers detected"); + } + // Open the first one... + if ((_dev = perseus_open(0)) == NULL) { + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "Unable to open Perseus device"); + } + // Download the standard firmware to the unit + std::cerr << "Downloading firmware..." << std::endl; + if (int rc = perseus_firmware_download(_dev,NULL)<0) { + PERSEUS_THROW_ON_ERROR (rc, "firmware download error"); + } + + // Dump some information about the receiver (S/N and HW rev) + int flag; + perseus_is_preserie(_dev, &flag); + if (flag != 0) + fprintf(stderr, "The device is a preserie unit"); + else { + eeprom_prodid prodid; + if (perseus_get_product_id(_dev,&prodid)<0) + fprintf(stderr, "get product id error: %s", perseus_errorstr()); + else + fprintf(stderr, "Receiver S/N: %05d-%02hX%02hX-%02hX%02hX-%02hX%02hX - HW Release:%hd.%hd\n", + (uint16_t) prodid.sn, + (uint16_t) prodid.signature[5], + (uint16_t) prodid.signature[4], + (uint16_t) prodid.signature[3], + (uint16_t) prodid.signature[2], + (uint16_t) prodid.signature[1], + (uint16_t) prodid.signature[0], + (uint16_t) prodid.hwrel, + (uint16_t) prodid.hwver); + } + // Printing all sampling rates available ..... + { + int buf[BUFSIZ]; + + if (perseus_get_sampling_rates (_dev, buf, sizeof(buf)/sizeof(buf[0])) < 0) { + fprintf(stderr, "get sampling rates error: %s\n", perseus_errorstr()); + } else { + int i = 0; + while (buf[i]) { + fprintf(stderr, "#%d: sample rate: %d\n", i, buf[i]); + _sample_rates.push_back( std::pair<double, uint32_t>( buf[i], i ) ); + i++; + } + /* since they may (and will) give us an unsorted array we have to sort it here + * to play nice with the monotonic requirement of meta-range later on */ + std::sort(_sample_rates.begin(), _sample_rates.end()); + + for (size_t i = 0; i < _sample_rates.size(); i++) + std::cerr << boost::format("%gM ") % (_sample_rates[i].first / 1e6); + + std::cerr << std::endl; + } + } + // Configure the receiver for 2 MS/s operations + fprintf(stderr, "Configuring FPGA...\n"); + if (int ret = perseus_set_sampling_rate(_dev, 96000) < 0) { // specify the sampling rate value in Samples/second + std::cerr << "fpga configuration error: " << perseus_errorstr() << std::endl; + PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); + } + + perseus_set_attenuator_in_db(_dev, _att_value); + // Enable ADC Dither, Disable ADC Preamp + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + // set the NCO frequency in the middle of the range allowed + set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); + set_sample_rate( get_sample_rates().start() ); + + _fifo = new boost::circular_buffer<gr_complex>(5000000); + if (!_fifo) { + throw std::runtime_error( std::string(__FUNCTION__) + " " + + "Failed to allocate a sample FIFO!" ); + } +} + +/* + * Our virtual destructor. + */ +perseus_source_c::~perseus_source_c () +{ + if (_dev) { + if (_frun) stop(); + int ret = perseus_close(_dev); + if ( ret != PERSEUS_NOERROR ) { + std::cerr << PERSEUS_FORMAT_ERROR(ret, "Failed to close Perseus") << std::endl; + } else + _dev = NULL; + } + perseus_exit(); + + if (_fifo) { + delete _fifo; + _fifo = NULL; + } +} + + +typedef union { + struct { + int32_t i; + int32_t q; + } __attribute__((__packed__)) iq; + struct { + uint8_t i1; + uint8_t i2; + uint8_t i3; + uint8_t i4; + uint8_t q1; + uint8_t q2; + uint8_t q3; + uint8_t q4; + } __attribute__((__packed__)) ; +} iq_sample; + + +int perseus_source_c::perseus_rx_callback(void *buf, int buf_size) +{ + size_t i, n_avail, to_copy, num_samples; + + uint8_t *samplebuf = (uint8_t*)buf; + + num_samples = buf_size/6; + + if (buf_size % 6) + std::cerr << "FATAL !!!!!!! not on boundary" << std::endl; + + iq_sample s; + + _fifo_lock.lock(); + + n_avail = _fifo->capacity() - _fifo->size(); + to_copy = (n_avail < num_samples ? n_avail : num_samples); + + for (i = 0; i < to_copy; i++ ) { + + s.i1 = s.q1 = 0; + s.i2 = *samplebuf++; + s.i3 = *samplebuf++; + s.i4 = *samplebuf++; + s.q2 = *samplebuf++; + s.q3 = *samplebuf++; + s.q4 = *samplebuf++; + + // convert 24 bit two's complements integers to float in [-1.0 - +1.0] range + // Push sample to the fifo + _fifo->push_back( gr_complex( (float)(s.iq.i) / (INT_MAX - 256), (float)(s.iq.q) / (INT_MAX - 256) ) ); + + } + // keep a counter of processed bytes + _cnt += buf_size; + + _fifo_lock.unlock(); + + /* We have made some new samples available to the consumer in work() */ + if (to_copy) { + //std::cerr << "+" << std::flush; + _samp_avail.notify_one(); + } + + /* Indicate overrun, if necessary */ + if (to_copy < num_samples) + std::cerr << "O" << std::flush; + + return 0; // TODO: return -1 on error/stop +} + +// static method used as callback from the libperseus-sdr library +int perseus_source_c::_perseus_rx_callback(void *buf, int buf_size, void *extra) +{ + perseus_source_c *obj = (perseus_source_c *)extra; + + return obj->perseus_rx_callback((float *)buf, buf_size); + + return 0; +} + + +bool perseus_source_c::start() +{ + int ret; + + if ( ! _dev ) + return false; + + std::cerr << "***** START COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + _frun = true; + + // in order to guarantee samples stream synchronization + // re-set the sample rate each time the stream is started + set_sample_rate( get_sample_rate() ); + + ret = perseus_start_async_input(_dev, + 6 * 1024 * 2 /* buffer size */, + perseus_source_c::_perseus_rx_callback, + (void *)this); + if (ret != PERSEUS_NOERROR) { + std::cerr << "Failed to start RX streaming (" + << ret << ")" << std::endl; + return false; + } else + return true; +} + +bool perseus_source_c::stop() +{ + if ( ! _dev ) + return false; + + _frun = false; + + std::cerr << "***** STOP COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + int ret = perseus_stop_async_input(_dev); + + if ( ret != PERSEUS_NOERROR ) { + std::cerr << "Failed to stop RX streaming (" << ret << ")" << std::endl; + return false; + } else + return true; +} + +int perseus_source_c::work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ) +{ + gr_complex *out = (gr_complex *)output_items[0]; + + if ( _frun == false ) return WORK_DONE; + + boost::unique_lock<boost::mutex> lock(_fifo_lock); + + /* Wait until we have the requested number of samples */ + int n_samples_avail = _fifo->size(); + + while (n_samples_avail < noutput_items) { + _samp_avail.wait(lock); + n_samples_avail = _fifo->size(); + } + + for(int i = 0; i < noutput_items; ++i) { + out[i] = _fifo->at(0); + _fifo->pop_front(); + } + + return noutput_items; +} + +std::vector<std::string> perseus_source_c::get_devices() +{ + std::vector<std::string> devices; + std::string label; + + std::string args = "perseus=0,label='Perseus'"; + devices.push_back( args ); + + return devices; +} + +size_t perseus_source_c::get_num_channels() +{ + return 1; +} + +osmosdr::meta_range_t perseus_source_c::get_sample_rates() +{ + osmosdr::meta_range_t range; + + for (size_t i = 0; i < _sample_rates.size(); i++) { + range += osmosdr::range_t( _sample_rates[i].first ); + std::cerr << "SR: " << i << " : (" + << _sample_rates[i].first << ")" << std::endl; + } + return range; +} + +double perseus_source_c::set_sample_rate( double rate ) +{ + int ret; + if ((ret = perseus_set_sampling_rate(_dev, rate)) < 0) { + PERSEUS_THROW_ON_ERROR(ret, "Unable to set sample rate."); + } else + _sample_rate = rate; + + return get_sample_rate(); +} + +double perseus_source_c::get_sample_rate() +{ + return _sample_rate; +} + +osmosdr::freq_range_t perseus_source_c::get_freq_range( size_t chan ) +{ + osmosdr::freq_range_t range; + + range += osmosdr::range_t( PERSEUS_DDC_FREQ_MIN, PERSEUS_DDC_FREQ_MAX ); + + return range; +} + +double perseus_source_c::set_center_freq( double freq, size_t chan ) +{ + int ret; + + if (_dev) { + ret = + perseus_set_ddc_center_freq(_dev, + (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), + _preselector == true ? 1:0); + if ( ret == PERSEUS_NOERROR ) { + _center_freq = freq; + } else { + PERSEUS_THROW_ON_ERROR( ret, PERSEUS_FUNC_STR( "perseus_set_ddc_center_freq", freq ) ) + } + } + + return get_center_freq( chan ); +} + +double perseus_source_c::get_center_freq( size_t chan ) +{ + return _center_freq; +} + +double perseus_source_c::set_freq_corr( double ppm, size_t chan ) +{ + return _freq_corr = ppm; +} + +double perseus_source_c::get_freq_corr( size_t chan ) +{ + return _freq_corr; +} + +std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) +{ + std::vector< std::string > names; + + names += "Attenuator"; + names += "ADC preamp"; + names += "ADC dither"; + + return names; +} + +// +// FIXME +// +osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) +{ + return get_gain_range( "Attenuator", chan ); +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) +{ + if ( "Attenuator" == name ) { + return osmosdr::gain_range_t( -30, 0, 10 ); + } + if ( "ADC preamp" == name ) { + return osmosdr::gain_range_t( 0, 6, 6 ); + } + if ( "ADC dither" == name ) { + return osmosdr::gain_range_t( 0, 1, 1 ); + } + + return osmosdr::gain_range_t(); +} + + +double perseus_source_c::set_attenuator( double gain, size_t chan ) +{ + int ret; + + gain = - gain; + if (_dev && _att_value != gain) { + ret = perseus_set_attenuator_in_db (_dev, gain); + + if ( PERSEUS_NOERROR == ret ) { + _att_value = gain; + } else { + std::cerr << "ERROR: perseus_set_attenuator_in_db: " << gain << std::endl; + } + } + + return _att_value; +} + +double perseus_source_c::set_adc_preamp( double gain, size_t chan ) +{ + std::cerr << "set_adc_preamp: " << gain << std::endl; + + if (_dev) { + _adc_preamp = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } + return gain; +} + +double perseus_source_c::set_adc_dither( double gain, size_t chan ) +{ + std::cerr << "set_adc_dither: " << gain << std::endl; + + if (_dev) { + _adc_dither = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } + return gain; +} + +double perseus_source_c::get_attenuator( size_t chan ) +{ + return _att_value; +} + +double perseus_source_c::get_adc_preamp(size_t chan ) +{ + double v = _adc_preamp == true ? 6. : 0.; + std::cerr << "get_adc_preamp: " << _adc_preamp << " value" << v << std::endl; + return v; +} + +double perseus_source_c::get_adc_dither(size_t chan ) +{ + double v = _adc_dither == true ? 1. : 0.; + std::cerr << "get_adc_dither: " << _adc_dither << " value" << v << std::endl; + return v; +} + + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + if ( "Attenuator" == name ) { + return set_attenuator( gain, chan ); + } + if ( "ADC preamp" == name ) { + return set_adc_preamp( gain, chan ); + } + if ( "ADC dither" == name ) { + return set_adc_dither( gain, chan ); + } + return gain; +} + + +double perseus_source_c::get_gain( const std::string & name, size_t chan ) +{ + if ( "Attenuator" == name ) { + return get_attenuator( chan ); + } + if ( "ADC preamp" == name ) { + return get_adc_preamp( chan ); + } + if ( "ADC dither" == name ) { + return get_adc_dither( chan ); + } + return 0.0; +} + + + +std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) +{ + std::vector< std::string > antennas; + + antennas += "RX"; + antennas += "RX+PRESELECTOR"; + + return antennas; +} + +std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) +{ + if ( antenna == "RX" ) { + _preselector = false; + set_center_freq( get_center_freq() ); + return "RX"; + } + if ( antenna == "RX+PRESELECTOR" ) { + _preselector = true; + set_center_freq( get_center_freq() ); + return "RX+PRESELECTOR"; + } + return get_antenna( chan ); +} + +std::string perseus_source_c::get_antenna( size_t chan ) +{ + std::cerr << "perseus_source_c::get_antenna: " << chan << std::endl; + return "RX"; +} diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h new file mode 100644 index 0000000..55d3f89 --- /dev/null +++ b/lib/perseus/perseus_source_c.h @@ -0,0 +1,135 @@ +/* -*- c++ -*- */ +/* + * Copyright 2013 Dimitri Stolnikov <horiz0n(a)gmx.net> + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_PERSEUS_SOURCE_C_H +#define INCLUDED_PERSEUS_SOURCE_C_H + +#include <boost/circular_buffer.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread/condition_variable.hpp> + +#include <gnuradio/sync_block.h> + +#include "source_iface.h" +#include <perseus-sdr.h> + +class perseus_source_c; + +typedef boost::shared_ptr<perseus_source_c> perseus_source_c_sptr; + +/*! + * \brief Return a shared_ptr to a new instance of perseus_source_c. + * + * To avoid accidental use of raw pointers, perseus_source_c's + * constructor is private. make_perseus_source_c is the public + * interface for creating new instances. + */ +perseus_source_c_sptr make_perseus_source_c (const std::string & args = ""); + +/*! + * \brief Provides a stream of complex samples. + * \ingroup block + */ +class perseus_source_c : + public gr::sync_block, + public source_iface +{ +private: + // The friend declaration allows make_perseus_source_c to + // access the private constructor. + + friend perseus_source_c_sptr make_perseus_source_c (const std::string & args); + + perseus_source_c (const std::string & args); + +public: + ~perseus_source_c (); + + bool start(); + bool stop(); + + int work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ); + + static std::vector< std::string > get_devices(); + + size_t get_num_channels( void ); + + osmosdr::meta_range_t get_sample_rates( void ); + double set_sample_rate( double rate ); + double get_sample_rate( void ); + + osmosdr::freq_range_t get_freq_range( size_t chan = 0 ); + double set_center_freq( double freq, size_t chan = 0 ); + double get_center_freq( size_t chan = 0 ); + double set_freq_corr( double ppm, size_t chan = 0 ); + double get_freq_corr( size_t chan = 0 ); + + std::vector<std::string> get_gain_names( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); + + double set_gain( double gain, size_t chan = 0 ) {return gain; } + double get_gain( size_t chan = 0 ) {return _att_value; } + + double set_attenuator( double gain, size_t chan = 0 ); + double get_attenuator( size_t chan = 0 ); + + double set_adc_preamp( double gain, size_t chan = 0 ); + double get_adc_preamp( size_t chan = 0 ); + + double set_adc_dither( double gain, size_t chan = 0 ); + double get_adc_dither( size_t chan = 0 ); + + double set_gain( double gain, const std::string & name, size_t chan = 0 ); + double get_gain( const std::string & name, size_t chan = 0 ); + + std::vector< std::string > get_antennas( size_t chan = 0 ); + std::string set_antenna( const std::string & antenna, size_t chan = 0 ); + std::string get_antenna( size_t chan = 0 ); + + +private: + static int _perseus_rx_callback(void *buf, int buf_size, void *extra); + + int perseus_rx_callback(void *samples, int sample_count); + + perseus_descr *_dev; + + boost::circular_buffer<gr_complex> *_fifo; + boost::mutex _fifo_lock; + boost::condition_variable _samp_avail; + + std::vector< std::pair<double, uint32_t> > _sample_rates; + double _sample_rate; + double _center_freq; + double _freq_corr; + + bool _frun; + int _cnt; + double _att_value; + bool _adc_preamp; + bool _adc_dither; + bool _preselector; +}; + +#endif /* INCLUDED_PERSEUS_SOURCE_C_H */ diff --git a/lib/source_impl.cc b/lib/source_impl.cc index a28f314..ead4ef7 100644 --- a/lib/source_impl.cc +++ b/lib/source_impl.cc @@ -92,6 +92,9 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif #include "arg_helpers.h" #include "source_impl.h" @@ -171,6 +174,9 @@ source_impl::source_impl( const std::string &args ) #ifdef ENABLE_FREESRP dev_types.push_back("freesrp"); #endif +#ifdef ENABLE_PERSEUS + dev_types.push_back("perseus"); +#endif std::cerr << "gr-osmosdr " << GR_OSMOSDR_VERSION << " (" << GR_OSMOSDR_LIBVER << ") " << "gnuradio " << gr::version() << std::endl; @@ -252,7 +258,10 @@ source_impl::source_impl( const std::string &args ) BOOST_FOREACH( std::string dev, freesrp_source_c::get_devices() ) dev_list.push_back( dev ); #endif - +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + dev_list.push_back( dev ); +#endif // std::cerr << std::endl; // BOOST_FOREACH( std::string dev, dev_list ) // std::cerr << "'" << dev << "'" << std::endl; @@ -383,6 +392,13 @@ source_impl::source_impl( const std::string &args ) } #endif +#ifdef ENABLE_PERSEUS + if ( dict.count("perseus") ) { + perseus_source_c_sptr src = make_perseus_source_c( arg ); + block = src; iface = src.get(); + } +#endif + if ( iface != NULL && long(block.get()) != 0 ) { _devs.push_back( iface ); -- 1.9.1

3 2

Is this compatible for AIS Receiver ?
by Irsyad Irsyad 22 Feb '18

22 Feb '18

Sent from my iPhone

1 0

RTL-SDR : No supported tuner found
by Lidoro 13 Feb '18

13 Feb '18

Hello, I try to install rtl-sdr and gnuradio on my computer, on Linux mint 18.1 cinnamon 3.2.7 64 bits. the installation is going well but when I try to execute rtl_test : Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001 Using device 0: Generic RTL2832U OEM No supported tuner found Enabled direct sampling mode, input 1 Supported gain values (1): 0.0 Sampling at 2048000 S/s. I try intallling with a script and with pybombs, i have the same issue. My dongle have RTL2832 chip and FC0012 tuner it works on windows, and it works when i use "linux live gnuradio dvd". And it works if I start on "linux live gnuradio dvd" and reboot after on linux mint. Thank you for your help Best Regards Lidoro

1 0

rtl-sdr with bias T
by Cinaed Simson 13 Feb '18

13 Feb '18

Hi - there appears to be problem with rtl-sdr with bias T and the RTL2832U OEM Rafael Micro R820T tuner. I get PLL errors when I try to calibrate it using kal - or when I use rtl_test. Using device 0: Generic RTL2832U OEM Found Rafael Micro R820T tuner Exact sample rate is: 270833.002142 Hz [R82XX] PLL not locked! Setting gain: 33.8 dB And I get the same error PLL when I run rtl_test. If I back out of the latest git version to v0.5.3 it works correctly - I can calibrate the dongle using kal and run rtl_test without any PLL errors. This is a known problem? -- Cinaed

3 4

osmosdr::device::find fails to find Rfspace NetSDR on MacOS Sierra
by dale ranta 07 Feb '18

07 Feb '18

When I updated to MacOS Sierra osmosdr::device::find stopped finding my NetSDR. This short program shows the problem - ************************************************ fprintf(stderr,"I am here\n"); osmosdr::devices_t devs = osmosdr::device::find(); for(int k=0;k<devs.size();++k){ std::cerr << " k " << k << " "<< devs[k].to_string() << std::endl; } fprintf(stderr,"I am done 2\n"); src = osmosdr::source::make("rfspace=192.168.1.7:50000"); fprintf(stderr,"I am done 3\n"); Output- I am here sdrplay=0,label='SDRplay RSP2 1707039B20' k 0 label='Realtek RTL2838UHIDIR SN: 00000001',rtl=0 k 1 label='SDRplay RSP2 1707039B20',sdrplay=0 k 2 hackrf,label='HackRF HackRF One' k 3 label='RFSPACE SDR-IQ Receiver',sdr-iq=/dev/ttyUSB0 k 4 label='RFSPACE SDR-IP Receiver',sdr-ip=127.0.0.1:50000 k 5 label='RFSPACE NetSDR Receiver',netsdr=127.0.0.1:50000 k 6 cloudiq=127.0.0.1:50000,label='RFSPACE Cloud-IQ Receiver' k 7 driver=sdrplay,label='SDRplay Dev0 RSP2 1707039B20',soapy=0 k 8 label='RTL-SDR Spectrum Server',rtl_tcp=localhost:1234 k 9 label='Red Pitaya Transceiver Server',redpitaya=192.168.1.100:1001 k 10 file=/path/to/your/file,freq=100e6,label='Complex Sampled (IQ) File',rate=1e6,repeat=true,throttle=true I am done 2 gr-osmosdr v0.1.4-136-g49fb5538 (0.1.5git) gnuradio 3.7.11 built-in source types: file fcd rtl rtl_tcp sdrplay hackrf bladerf rfspace airspy soapy redpitaya Using RFSPACE NetSDR SN NS000448 option --DRS BOOT 107 FW 112 HW 100 FPGA 1/7 I am done 3 *********************************************** The device::find routine locates the three other SDRs that I have plugged in, but not the netSDR. The source::make routine however finds it without problem. Looking at the search routines, they are similar to the old ones in CuteSDR. Early last year the CuteSDR routines were revised and now work correctly to find the RFspace NetSDR on Sierra and High Sierra. Dale

1 0

osmosdr::device::find fails to find Rfspace NetSDR on MacOS Sierra
by dale ranta 07 Feb '18

07 Feb '18

1 0

[PATCH] RTL-SDR: Fix regression in FC00012 tuner startup (needs testing on FC2580)
by David Basden 05 Feb '18

05 Feb '18

This patch fixes a regression of rtl-sdr dongles with the FC00012 tuner. The code to switch on the FC00012 tuner by pulling it's ~RESET line low ended up with an off-by-one error in a refactor a long time ago, The FC00012 only continued to work by accident as a different bug in rtlsdr_set_gpio_output had a side-effect of pulling low the FC00012's ~RESET line When the rtl_set_gpio_output bug was fixed in ba64a7459a43 the side- effect also went away, leaving the FC00012 tuner in reset, and failing to be detected (or indeed work at all). This patch fixes the original off-by-one error. It's been tested on an FC00012 in a GTek T803 from both warm and cold starts, but needs testing on the FC2580 as both the FC00012 and FC2580 are brought out of reset by a GPIO off the RTL (at least in some designs). If the FC2580 actually uses a different pin, this code will also break. (I'm only going from vague memory that the FC2580 used the same pin.) --- src/librtlsdr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/librtlsdr.c b/src/librtlsdr.c index b369a5d..678fadd 100644 --- a/src/librtlsdr.c +++ b/src/librtlsdr.c @@ -1565,11 +1565,11 @@ int rtlsdr_open(rtlsdr_dev_t **out_dev, uint32_t index) } /* initialise GPIOs */ - rtlsdr_set_gpio_output(dev, 5); + rtlsdr_set_gpio_output(dev, 4); /* reset tuner before probing */ - rtlsdr_set_gpio_bit(dev, 5, 1); - rtlsdr_set_gpio_bit(dev, 5, 0); + rtlsdr_set_gpio_bit(dev, 4, 1); + rtlsdr_set_gpio_bit(dev, 4, 0); reg = rtlsdr_i2c_read_reg(dev, FC2580_I2C_ADDR, FC2580_CHECK_ADDR); if ((reg & 0x7f) == FC2580_CHECK_VAL) { @@ -1581,7 +1581,7 @@ int rtlsdr_open(rtlsdr_dev_t **out_dev, uint32_t index) reg = rtlsdr_i2c_read_reg(dev, FC0012_I2C_ADDR, FC0012_CHECK_ADDR); if (reg == FC0012_CHECK_VAL) { fprintf(stderr, "Found Fitipower FC0012 tuner\n"); - rtlsdr_set_gpio_output(dev, 6); + rtlsdr_set_gpio_output(dev, 5); dev->tuner_type = RTLSDR_TUNER_FC0012; goto found; } -- 2.13.2

2 1

(no subject)
by David Basden 04 Feb '18

04 Feb '18

Hi, I recently found my dongle with the FC0012 again after having lost it for a couple of years, and noticed the tuner wasn't detecting on recent builds (by recent, it looks like at least a year and a half ago. :) ) There were a few other posts around that I saw with the same issue so I dug into the problem a bit. It looks it was a behavioural regression in commit ba64a7459a43652354990855176a7d8dad5b9d54 which was a actually bugfix in the GPIO direction setting code (see below for the commit comment). The bugfix patch references http://lea.hamradio.si/~s57uuu/mischam/rtlsdr/ports.html which The reason this regressed the FC0012 tuner support is that in tuner detection code, before the probe for the FC00012 there are a few lines: /* initialise GPIOs */ rtlsdr_set_gpio_output(dev, 5); /* reset tuner before probing */ rtlsdr_set_gpio_bit(dev, 5, 1); rtlsdr_set_gpio_bit(dev, 5, 0); Looking at one of the early (ugly) patches I wrote trying to get the FC0012 working, This is the original code before cleaned up: https://gist.github.com/dbasden/2171926#file-rtlsdr-fc0012-diff-L123 : + if (tuner_type == TUNER_FC0012) { + dump_rtl_regs(); + DEBUGF("reset fs0012 tuner... "); + /* the fs0012 has it's RESET line hooked up to GPIO5 + * + * If we don't set GPIO5 to an output and leave it floating, + * the tuner never comes up (just stays in RESET state) + * + * GPIO6 controls the V/U band filter, so we should set that + * to an output too + */ + r = rtl_read_reg(SYSB, GPD, 1); + r &= (~(0x30)); rtl_write_reg(SYSB, GPO, r, 1); + r = rtl_read_reg(SYSB, GPOE, 1); + r |= 0x30; rtl_write_reg(SYSB, GPOE, r, 1); + + /* Do reset */ + rtl_set_gpio_bit(5,1); + rtl_set_gpio_bit(5,0); + dump_rtl_regs(); + } This code was eventually abstracted out to The bug in the code above described in http://lea.hamradio.si/~s57uuu/mischam/rtlsdr/ports.html, linked to in the commit log of the ba64a7459a43652354990855176a7d8dad5b9d54 fixing the same bug. The code was cleaned up eventually abstracted into rtl_sdr_set_output(), which had the same typo as my original code: I wrote back the GPD register to GPO. This accidentally worked enough to fix the specific case I was wanting (to stop the RESET line of the FC0012 floating), but didn't actually write to the GPIO direction register. Looking at some of the forum posts, and checking myself, if the older code runs once, the tuner will be just fine until the dongle loses power. Then as GPIO5 is not set up into a state for the FC0012 to be happy, it will not come up again. This seems to have made the problem harder to debug (I don't know if I would have not known where to look if I had not already hit the problem when originally porting the driver) Digging through some more just now (I really don't have a great dev environment right now, and nothing to probe the hardware itself easily available), I checked the state of GPD, GPO and GPOE before the tuner probing, at it looks like the only real side effect from the code above being buggy would be to set bit 1<<4 low. calling rtl_set_gpio_bit(4,0) brought up the FC0012 tuner. Re-reading the old and new code, it looks like it's an off-by-one error in GPIO numbering: * The original code set GPOE on 0x30, which is (1<<4) | (1<<5). * These are referred to in the code above as "GPIO5" as the FC0012 RESET line and "GPIO6" as the V/U band filter control. * rtlsdr_set_gpio_output(5) and rtl_set_gpio_bit(5,0) are switching the V/U band filter, not the RESET line for the FC0012 Sorry, I don't have access to the datasheet for the RTL, so I'm not sure if bit 0 is GPIO0 or GPIO1. In any case, it looks like the solution is to just fix the off-by-one error in the FC0012 probe code. I'll post a patch. Thanks, David (commit for bugfix where fc0012 tuner regressed.) commit ba64a7459a43652354990855176a7d8dad5b9d54 Author: Lucas Teske <lucas(a)teske.net.br> Date: Wed Aug 17 20:31:33 2016 -0300 lib: fix direction bit in GPIO code source: http://lea.hamradio.si/~s57uuu/mischam/rtlsdr/ports.html * Removed unnecessary comment of old code. Signed-off-by: Fabian P. Schmidt <kerel-fs(a)gmx.de> Signed-off-by: Steve Markgraf <steve(a)steve-m.de> :040000 040000 12c5ea73db04c45699d7befa2c5916ae074a1999 2d08166fe31338f5ff90186272b40bc6ed3254fa M src (HEAD) davidb@grey:~/Personal/sdr/rtl-sdr$

2 1

Fix for FC0012
by David Basden 04 Feb '18

04 Feb '18

Hi, I think my messages are getting filtered, but on the chance that someone is reading these as unmoderated, the fix for the FC0012 is to set GPIO 4 to 0. It could be that GPIO4 is the RST, or that it is something else entirely. Looking through the code, and the state of the registers on startup, one of the surprisingly few side effects of writing GPD to GPO would be to set GPIO4 to 0. Multiple bugs working together made the whole thing work. David

1 0

librtlsdr: FC0012 tuner regression
by David Basden 04 Feb '18

04 Feb '18

Hi, I recently found my dongle with the FC0012 again after having lost it for a couple of years, and noticed the tuner wasn't detecting on recent builds (by recent, it looks like at least a year and a half ago. :) ) There were a few other posts around that I saw with the same issue so I dug into the problem a bit. It looks it was a behavioural regression in commit ba64a7459a43652354990855176a7d8dad5b9d54 which was a actually bugfix in the GPIO direction setting code (see below for the commit comment). The bugfix patch references http://lea.hamradio.si/~s57uuu/mischam/rtlsdr/ports.html which The reason this regressed the FC0012 tuner support is that in tuner detection code, before the probe for the FC00012 there are a few lines: /* initialise GPIOs */ rtlsdr_set_gpio_output(dev, 5); /* reset tuner before probing */ rtlsdr_set_gpio_bit(dev, 5, 1); rtlsdr_set_gpio_bit(dev, 5, 0); Looking at one of the early (ugly) patches I wrote trying to get the FC0012 working, This is the original code before cleaned up: https://gist.github.com/dbasden/2171926#file-rtlsdr-fc0012-diff-L123 : + if (tuner_type == TUNER_FC0012) { + dump_rtl_regs(); + DEBUGF("reset fs0012 tuner... "); + /* the fs0012 has it's RESET line hooked up to GPIO5 + * + * If we don't set GPIO5 to an output and leave it floating, + * the tuner never comes up (just stays in RESET state) + * + * GPIO6 controls the V/U band filter, so we should set that + * to an output too + */ + r = rtl_read_reg(SYSB, GPD, 1); + r &= (~(0x30)); rtl_write_reg(SYSB, GPO, r, 1); + r = rtl_read_reg(SYSB, GPOE, 1); + r |= 0x30; rtl_write_reg(SYSB, GPOE, r, 1); + + /* Do reset */ + rtl_set_gpio_bit(5,1); + rtl_set_gpio_bit(5,0); + dump_rtl_regs(); + } This code was eventually abstracted out to The bug in the code above described in http://lea.hamradio.si/~s57uuu/mischam/rtlsdr/ports.html, linked to in the commit log of the ba64a7459a43652354990855176a7d8dad5b9d54 fixing the same bug. The code was cleaned up eventually abstracted into rtl_sdr_set_output(), which had the same typo as my original code: I wrote back the GPD register to GPO. This accidentally worked enough to fix the specific case I was wanting (to stop the RESET line of the FC0012 floating), but didn't actually write to the GPIO direction register. This is as far as I've gotten so far. I don't really have a good setup right now for debugging much further right this moment, but I at least know where the problem is. I don't have a copy of the RTL datasheet, or easy access to anything to measure the levels on that line, but assuming that the bugfix is the correct behaviour, and the buggy code is undefined behaviour, it's quite possible that I've managed to get the GPIO5 into a state just enough to get keep the FC0012 out of reset. Looking at some of the forum posts, and checking myself, if the older code runs once, the tuner will be just fine until the dongle loses power. Then as GPIO5 is not set up into a state for the FC0012 to be happy, it will not come up again. This seems to have made the problem harder to debug (I don't know if I would have not known where to look if I had not already hit the problem when originally porting the driver) Flipping the gpio bits the other direction is not working, so I'm going to have to look at it further, but I figured I should at least post to say where the bug was even if I haven't gotten a solution yet. If I'm missing anything obvious there, please let me know Thanks, David (commit for bugfix where fc0012 tuner regressed.) commit ba64a7459a43652354990855176a7d8dad5b9d54 Author: Lucas Teske <lucas(a)teske.net.br> Date: Wed Aug 17 20:31:33 2016 -0300 lib: fix direction bit in GPIO code source: http://lea.hamradio.si/~s57uuu/mischam/rtlsdr/ports.html * Removed unnecessary comment of old code. Signed-off-by: Fabian P. Schmidt <kerel-fs(a)gmx.de> Signed-off-by: Steve Markgraf <steve(a)steve-m.de> :040000 040000 12c5ea73db04c45699d7befa2c5916ae074a1999 2d08166fe31338f5ff90186272b40bc6ed3254fa M src (HEAD) davidb@grey:~/Personal/sdr/rtl-sdr$

1 0

[PATCH] gr-osmosdr: Microtelecom Perseus HF receiver support
by andrea montefusco 03 Feb '18

03 Feb '18

Hi maintainer and all, Below you find a patch that implements Microtelecom Perseus support in gr-osmosdr. I have tested it in gqrx SDR software. (second attempt as the first one got corrupted) --- CMakeLists.txt | 1 + cmake/Modules/FindLibPERSEUS.cmake | 24 ++ lib/CMakeLists.txt | 8 + lib/airspy/airspy_source_c.cc | 5 +- lib/config.h.in | 1 + lib/device.cc | 8 + lib/perseus/CMakeLists.txt | 37 +++ lib/perseus/perseus_source_c.cc | 507 +++++++++++++++++++++++++++++++++++++ lib/perseus/perseus_source_c.h | 120 +++++++++ lib/rtl/rtl_source_c.cc | 2 +- lib/source_impl.cc | 18 +- 11 files changed, 727 insertions(+), 4 deletions(-) create mode 100644 cmake/Modules/FindLibPERSEUS.cmake create mode 100644 lib/perseus/CMakeLists.txt create mode 100644 lib/perseus/perseus_source_c.cc create mode 100644 lib/perseus/perseus_source_c.h diff --git a/CMakeLists.txt b/CMakeLists.txt index 296456d..94acd4c 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -173,6 +173,7 @@ find_package(Volk) find_package(LibbladeRF) find_package(SoapySDR NO_MODULE) find_package(LibFreeSRP) +find_package(LibPERSEUS) find_package(Doxygen) if(NOT GNURADIO_RUNTIME_FOUND) diff --git a/cmake/Modules/FindLibPERSEUS.cmake b/cmake/Modules/FindLibPERSEUS.cmake new file mode 100644 index 0000000..5477327 --- /dev/null +++ b/cmake/Modules/FindLibPERSEUS.cmake @@ -0,0 +1,24 @@ +INCLUDE(FindPkgConfig) +PKG_CHECK_MODULES(PC_LIBPERSEUS libperseus-sdr) + +FIND_PATH( + LIBPERSEUS_INCLUDE_DIRS + NAMES perseus-sdr.h + HINTS $ENV{LIBPERSEUS_DIR}/include + ${PC_LIBPERSEUS_INCLUDEDIR} + PATHS /usr/local/include + /usr/include +) + +FIND_LIBRARY( + LIBPERSEUS_LIBRARIES + NAMES perseus-sdr + HINTS $ENV{LIBPERSEUS_DIR}/lib + ${PC_LIBPERSEUS_LIBDIR} + PATHS /usr/local/lib + /usr/lib +) + +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBPERSEUS DEFAULT_MSG LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) +MARK_AS_ADVANCED(LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) diff --git a/lib/CMakeLists.txt b/lib/CMakeLists.txt index c05b8d9..f555816 100644 --- a/lib/CMakeLists.txt +++ b/lib/CMakeLists.txt @@ -249,6 +249,14 @@ GR_INCLUDE_SUBDIRECTORY(freesrp) endif(ENABLE_FREESRP) ######################################################################## +# Setup PERSEUS component +######################################################################## +GR_REGISTER_COMPONENT("Microtelecom Perseus Receiver" ENABLE_PERSEUS LIBPERSEUS_FOUND) +if(ENABLE_PERSEUS) +GR_INCLUDE_SUBDIRECTORY(perseus) +endif(ENABLE_PERSEUS) + +######################################################################## # Setup configuration file ######################################################################## ADD_DEFINITIONS(-DHAVE_CONFIG_H=1) diff --git a/lib/airspy/airspy_source_c.cc b/lib/airspy/airspy_source_c.cc index 50150e5..02fc6ab 100644 --- a/lib/airspy/airspy_source_c.cc +++ b/lib/airspy/airspy_source_c.cc @@ -350,9 +350,10 @@ osmosdr::meta_range_t airspy_source_c::get_sample_rates() { osmosdr::meta_range_t range; - for (size_t i = 0; i < _sample_rates.size(); i++) + for (size_t i = 0; i < _sample_rates.size(); i++) { + std::cerr << "SR: [" << i << "]: " << _sample_rates[i].first << std::endl; range += osmosdr::range_t( _sample_rates[i].first ); - + } return range; } diff --git a/lib/config.h.in b/lib/config.h.in index 42e72f1..dac7e39 100644 --- a/lib/config.h.in +++ b/lib/config.h.in @@ -19,6 +19,7 @@ #cmakedefine ENABLE_SOAPY #cmakedefine ENABLE_REDPITAYA #cmakedefine ENABLE_FREESRP +#cmakedefine ENABLE_PERSEUS //provide NAN define for MSVC older than VC12 #if defined(_MSC_VER) && (_MSC_VER < 1800) diff --git a/lib/device.cc b/lib/device.cc index 025a22b..df0d734 100644 --- a/lib/device.cc +++ b/lib/device.cc @@ -90,6 +90,10 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif + #include "arg_helpers.h" using namespace osmosdr; @@ -194,6 +198,10 @@ devices_t device::find(const device_t &hint) BOOST_FOREACH( std::string dev, soapy_source_c::get_devices() ) devices.push_back( device_t(dev) ); #endif +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + devices.push_back( device_t(dev) ); +#endif /* software-only sources should be appended at the very end, * hopefully resulting in hardware sources to be shown first diff --git a/lib/perseus/CMakeLists.txt b/lib/perseus/CMakeLists.txt new file mode 100644 index 0000000..f45a10d --- /dev/null +++ b/lib/perseus/CMakeLists.txt @@ -0,0 +1,37 @@ +# Copyright 2017 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +include_directories( + ${CMAKE_CURRENT_SOURCE_DIR} + ${LIBPERSEUS_INCLUDE_DIRS} +) + +set(perseus_srcs + ${CMAKE_CURRENT_SOURCE_DIR}/perseus_source_c.cc +) + +######################################################################## +# Append gnuradio-osmosdr library sources +######################################################################## +list(APPEND gr_osmosdr_srcs ${perseus_srcs}) +list(APPEND gr_osmosdr_libs ${LIBPERSEUS_LIBRARIES} ${GNURADIO_BLOCKS_LIBRARIES}) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_c.cc new file mode 100644 index 0000000..0720da4 --- /dev/null +++ b/lib/perseus/perseus_source_c.cc @@ -0,0 +1,507 @@ +/* -*- c++ -*- */ +/* + * Copyright 2018 Andrea Montefusco IW0HDV + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * config.h is generated by configure. It contains the results + * of probing for features, options etc. It should be the first + * file included in your .cc file. + */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdexcept> +#include <iostream> +#include <algorithm> + +#include <boost/assign.hpp> +#include <boost/format.hpp> +#include <boost/detail/endian.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/thread/thread.hpp> + +#include <gnuradio/io_signature.h> + +#include "perseus_source_c.h" +#include "arg_helpers.h" + + + +using namespace boost::assign; + +#define PERSEUS_FORMAT_ERROR(ret, msg) \ + boost::str( boost::format(msg " (%1%)") % ret ) + +#define PERSEUS_THROW_ON_ERROR(ret, msg) \ + if ( ret != PERSEUS_NOERROR ) \ + { \ + throw std::runtime_error( PERSEUS_FORMAT_ERROR(ret, msg) ); \ + } + +#define PERSEUS_FUNC_STR(func, arg) \ + boost::str(boost::format(func "(%1%)") % arg) + " has failed" + +perseus_source_c_sptr make_perseus_source_c (const std::string & args) +{ + return gnuradio::get_initial_sptr(new perseus_source_c (args)); +} + +/* + * Specify constraints on number of input and output streams. + * This info is used to construct the input and output signatures + * (2nd & 3rd args to gr::block's constructor). The input and + * output signatures are used by the runtime system to + * check that a valid number and type of inputs and outputs + * are connected to this block. In this case, we accept + * only 0 input and 1 output. + */ +static const int MIN_IN = 0; // mininum number of input streams +static const int MAX_IN = 0; // maximum number of input streams +static const int MIN_OUT = 1; // minimum number of output streams +static const int MAX_OUT = 1; // maximum number of output streams + +/* + * The private constructor + */ +perseus_source_c::perseus_source_c (const std::string &args) + : gr::sync_block ("perseus_source_c", + gr::io_signature::make(MIN_IN, MAX_IN, sizeof (gr_complex)), + gr::io_signature::make(MIN_OUT, MAX_OUT, sizeof (gr_complex))), + _dev(NULL), + _sample_rate(0), + _center_freq(0), + _freq_corr(0), + _frun(false), + _cnt(0) +{ + //int ret; + + dict_t dict = params_to_dict(args); + + _dev = NULL; + + // Set debug info dumped to stderr to the maximum verbose level + perseus_set_debug(3); + + //fprintf (stderr, "Revision: %s\n", git_revision); + //fprintf (stderr, "SAMPLE RATE: %d\n", sr); + //fprintf (stderr, "NBUF: %d BUF SIZE: %d TOTAL BUFFER LENGTH: %d\n", nb, bs, nb*bs); + + // Check how many Perseus receivers are connected to the system + int num_perseus = perseus_init(); + std::cerr << "## Microtelecom Perseus ctor: " << num_perseus << " Perseus receivers found." << std::endl; + + if (num_perseus==0) { + perseus_exit(); + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "No Perseus receivers detected"); + } + // Open the first one... + if ((_dev = perseus_open(0)) == NULL) { + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "Unable to open Perseus device"); + } + // Download the standard firmware to the unit + std::cerr << "Downloading firmware..." << std::endl; + if (int rc = perseus_firmware_download(_dev,NULL)<0) { + PERSEUS_THROW_ON_ERROR (rc, "firmware download error"); + } + + // Dump some information about the receiver (S/N and HW rev) + int flag; + perseus_is_preserie(_dev, &flag); + if (flag != 0) + fprintf(stderr, "The device is a preserie unit"); + else { + eeprom_prodid prodid; + if (perseus_get_product_id(_dev,&prodid)<0) + fprintf(stderr, "get product id error: %s", perseus_errorstr()); + else + fprintf(stderr, "Receiver S/N: %05d-%02hX%02hX-%02hX%02hX-%02hX%02hX - HW Release:%hd.%hd\n", + (uint16_t) prodid.sn, + (uint16_t) prodid.signature[5], + (uint16_t) prodid.signature[4], + (uint16_t) prodid.signature[3], + (uint16_t) prodid.signature[2], + (uint16_t) prodid.signature[1], + (uint16_t) prodid.signature[0], + (uint16_t) prodid.hwrel, + (uint16_t) prodid.hwver); + } + // Printing all sampling rates available ..... + { + int buf[BUFSIZ]; + + if (perseus_get_sampling_rates (_dev, buf, sizeof(buf)/sizeof(buf[0])) < 0) { + fprintf(stderr, "get sampling rates error: %s\n", perseus_errorstr()); + } else { + int i = 0; + while (buf[i]) { + fprintf(stderr, "#%d: sample rate: %d\n", i, buf[i]); + + _sample_rates.push_back( std::pair<double, uint32_t>( buf[i], i ) ); + i++; + } + /* since they may (and will) give us an unsorted array we have to sort it here + * to play nice with the monotonic requirement of meta-range later on */ + std::sort(_sample_rates.begin(), _sample_rates.end()); + + for (size_t i = 0; i < _sample_rates.size(); i++) + std::cerr << boost::format("%gM ") % (_sample_rates[i].first / 1e6); + + std::cerr << std::endl; + } + } + // Configure the receiver for 2 MS/s operations + fprintf(stderr, "Configuring FPGA...\n"); + if (int ret = perseus_set_sampling_rate(_dev, 96000) < 0) { // specify the sampling rate value in Samples/second + std::cerr << "fpga configuration error: " << perseus_errorstr() << std::endl; + PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); + } + + perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + // Enable ADC Dither, Disable ADC Preamp + perseus_set_adc(_dev, true, false); + // set the NCO frequency in the middle of the range allowed + set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); + set_sample_rate( get_sample_rates().start() ); + + _fifo = new boost::circular_buffer<gr_complex>(5000000); + if (!_fifo) { + throw std::runtime_error( std::string(__FUNCTION__) + " " + + "Failed to allocate a sample FIFO!" ); + } +} + +/* + * Our virtual destructor. + */ +perseus_source_c::~perseus_source_c () +{ + if (_dev) { + if (_frun) stop(); + int ret = perseus_close(_dev); + if ( ret != PERSEUS_NOERROR ) { + std::cerr << PERSEUS_FORMAT_ERROR(ret, "Failed to close Perseus") << std::endl; + } else + _dev = NULL; + } + perseus_exit(); + + if (_fifo) { + delete _fifo; + _fifo = NULL; + } +} + + +typedef union { + struct { + int32_t i; + int32_t q; + } __attribute__((__packed__)) iq; + struct { + uint8_t i1; + uint8_t i2; + uint8_t i3; + uint8_t i4; + uint8_t q1; + uint8_t q2; + uint8_t q3; + uint8_t q4; + } __attribute__((__packed__)) ; +} iq_sample; + + +int perseus_source_c::perseus_rx_callback(void *buf, int buf_size) +{ + size_t i, n_avail, to_copy, num_samples; + + uint8_t *samplebuf = (uint8_t*)buf; + + num_samples = buf_size/6; + + if (buf_size % 6) + std::cerr << "FATAL !!!!!!! not on boundary" << std::endl; + + iq_sample s; + + _fifo_lock.lock(); + + n_avail = _fifo->capacity() - _fifo->size(); + to_copy = (n_avail < num_samples ? n_avail : num_samples); + + for (i = 0; i < to_copy; i++ ) { + + s.i1 = s.q1 = 0; + s.i2 = *samplebuf++; + s.i3 = *samplebuf++; + s.i4 = *samplebuf++; + s.q2 = *samplebuf++; + s.q3 = *samplebuf++; + s.q4 = *samplebuf++; + + // convert 24 bit two's complements integers to float in [-1.0 - +1.0] range + + /* Push sample to the fifo */ + _fifo->push_back( gr_complex( (float)(s.iq.i) / (INT_MAX - 256), (float)(s.iq.q) / (INT_MAX - 256) ) ); + + } + // keep a counter of processed bytes + _cnt += buf_size; + + _fifo_lock.unlock(); + + /* We have made some new samples available to the consumer in work() */ + if (to_copy) { + //std::cerr << "+" << std::flush; + _samp_avail.notify_one(); + } + + /* Indicate overrun, if necessary */ + if (to_copy < num_samples) + std::cerr << "O" << std::flush; + + return 0; // TODO: return -1 on error/stop +} + +// static method used as callback from the libperseus-sdr library +int perseus_source_c::_perseus_rx_callback(void *buf, int buf_size, void *extra) +{ + perseus_source_c *obj = (perseus_source_c *)extra; + + return obj->perseus_rx_callback((float *)buf, buf_size); + + return 0; +} + + +bool perseus_source_c::start() +{ + int ret; + + if ( ! _dev ) + return false; + + std::cerr << "***** START COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + _frun = true; + + // in order to guarantee samples stream synchronization + // re-set the sample rate each time the stream is started + set_sample_rate( get_sample_rate() ); + + ret = perseus_start_async_input(_dev, + 6 * 1024 * 2 /* buffer size */, + perseus_source_c::_perseus_rx_callback, + (void *)this); + if (ret != PERSEUS_NOERROR) { + std::cerr << "Failed to start RX streaming (" + << ret << ")" << std::endl; + return false; + } else + return true; +} + +bool perseus_source_c::stop() +{ + if ( ! _dev ) + return false; + + _frun = false; + + std::cerr << "***** STOP COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + int ret = perseus_stop_async_input(_dev); + + if ( ret != PERSEUS_NOERROR ) { + std::cerr << "Failed to stop RX streaming (" << ret << ")" << std::endl; + return false; + } else + return true; +} + +int perseus_source_c::work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ) +{ + gr_complex *out = (gr_complex *)output_items[0]; + + if ( _frun == false ) return WORK_DONE; + + boost::unique_lock<boost::mutex> lock(_fifo_lock); + + /* Wait until we have the requested number of samples */ + int n_samples_avail = _fifo->size(); + + while (n_samples_avail < noutput_items) { + _samp_avail.wait(lock); + n_samples_avail = _fifo->size(); + } + + for(int i = 0; i < noutput_items; ++i) { + out[i] = _fifo->at(0); + _fifo->pop_front(); + } + + return noutput_items; +} + +std::vector<std::string> perseus_source_c::get_devices() +{ + std::vector<std::string> devices; + std::string label; + + std::string args = "perseus=0,label='Perseus'"; + devices.push_back( args ); + + return devices; +} + +size_t perseus_source_c::get_num_channels() +{ + return 1; +} + +osmosdr::meta_range_t perseus_source_c::get_sample_rates() +{ + osmosdr::meta_range_t range; + + for (size_t i = 0; i < _sample_rates.size(); i++) { + range += osmosdr::range_t( _sample_rates[i].first ); + std::cerr << "SR: " << i << " : (" + << _sample_rates[i].first << ")" << std::endl; + } + return range; +} + +double perseus_source_c::set_sample_rate( double rate ) +{ + int ret; + if ((ret = perseus_set_sampling_rate(_dev, rate)) < 0) { + PERSEUS_THROW_ON_ERROR(ret, "Unable to set sample rate."); + } else + _sample_rate = rate; + + return get_sample_rate(); +} + +double perseus_source_c::get_sample_rate() +{ + return _sample_rate; +} + +osmosdr::freq_range_t perseus_source_c::get_freq_range( size_t chan ) +{ + osmosdr::freq_range_t range; + + range += osmosdr::range_t( PERSEUS_DDC_FREQ_MIN, PERSEUS_DDC_FREQ_MAX ); + + return range; +} + +double perseus_source_c::set_center_freq( double freq, size_t chan ) +{ + int ret; + + if (_dev) { + ret = + perseus_set_ddc_center_freq(_dev, + (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), + 1); + if ( ret == PERSEUS_NOERROR ) { + _center_freq = freq; + } else { + PERSEUS_THROW_ON_ERROR( ret, PERSEUS_FUNC_STR( "perseus_set_ddc_center_freq", freq ) ) + } + } + + return get_center_freq( chan ); +} + +double perseus_source_c::get_center_freq( size_t chan ) +{ + return _center_freq; +} + +double perseus_source_c::set_freq_corr( double ppm, size_t chan ) +{ + return _freq_corr = ppm; +} + +double perseus_source_c::get_freq_corr( size_t chan ) +{ + return _freq_corr; +} + +std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) +{ + return {}; +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) +{ + return osmosdr::gain_range_t(); +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) +{ + return osmosdr::gain_range_t(); +} + + +double perseus_source_c::set_gain( double gain, size_t chan ) +{ + return gain; +} + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + return gain; +} + +double perseus_source_c::get_gain( size_t chan ) +{ + return 0.0; +} + +double perseus_source_c::get_gain( const std::string & name, size_t chan ) +{ + return 0.0; +} + +std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) +{ + std::vector< std::string > antennas; + + antennas += get_antenna( chan ); + + return antennas; +} + +std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) +{ + return get_antenna( chan ); +} + +std::string perseus_source_c::get_antenna( size_t chan ) +{ + return "RX"; +} diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h new file mode 100644 index 0000000..9eda23d --- /dev/null +++ b/lib/perseus/perseus_source_c.h @@ -0,0 +1,120 @@ +/* -*- c++ -*- */ +/* + * Copyright 2013 Dimitri Stolnikov <horiz0n(a)gmx.net> + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_PERSEUS_SOURCE_C_H +#define INCLUDED_PERSEUS_SOURCE_C_H + +#include <boost/circular_buffer.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread/condition_variable.hpp> + +#include <gnuradio/sync_block.h> + +#include "source_iface.h" +#include <perseus-sdr.h> + +class perseus_source_c; + +typedef boost::shared_ptr<perseus_source_c> perseus_source_c_sptr; + +/*! + * \brief Return a shared_ptr to a new instance of perseus_source_c. + * + * To avoid accidental use of raw pointers, perseus_source_c's + * constructor is private. make_perseus_source_c is the public + * interface for creating new instances. + */ +perseus_source_c_sptr make_perseus_source_c (const std::string & args = ""); + +/*! + * \brief Provides a stream of complex samples. + * \ingroup block + */ +class perseus_source_c : + public gr::sync_block, + public source_iface +{ +private: + // The friend declaration allows make_perseus_source_c to + // access the private constructor. + + friend perseus_source_c_sptr make_perseus_source_c (const std::string & args); + + perseus_source_c (const std::string & args); + +public: + ~perseus_source_c (); + + bool start(); + bool stop(); + + int work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ); + + static std::vector< std::string > get_devices(); + + size_t get_num_channels( void ); + + osmosdr::meta_range_t get_sample_rates( void ); + double set_sample_rate( double rate ); + double get_sample_rate( void ); + + osmosdr::freq_range_t get_freq_range( size_t chan = 0 ); + double set_center_freq( double freq, size_t chan = 0 ); + double get_center_freq( size_t chan = 0 ); + double set_freq_corr( double ppm, size_t chan = 0 ); + double get_freq_corr( size_t chan = 0 ); + + std::vector<std::string> get_gain_names( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); + double set_gain( double gain, size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); + double get_gain( size_t chan = 0 ); + double get_gain( const std::string & name, size_t chan = 0 ); + + std::vector< std::string > get_antennas( size_t chan = 0 ); + std::string set_antenna( const std::string & antenna, size_t chan = 0 ); + std::string get_antenna( size_t chan = 0 ); + + +private: + static int _perseus_rx_callback(void *buf, int buf_size, void *extra); + + int perseus_rx_callback(void *samples, int sample_count); + + perseus_descr *_dev; + + boost::circular_buffer<gr_complex> *_fifo; + boost::mutex _fifo_lock; + boost::condition_variable _samp_avail; + + std::vector< std::pair<double, uint32_t> > _sample_rates; + double _sample_rate; + double _center_freq; + double _freq_corr; + + bool _frun; + int _cnt; +}; + +#endif /* INCLUDED_PERSEUS_SOURCE_C_H */ diff --git a/lib/rtl/rtl_source_c.cc b/lib/rtl/rtl_source_c.cc index a371464..eb7042e 100644 --- a/lib/rtl/rtl_source_c.cc +++ b/lib/rtl/rtl_source_c.cc @@ -221,7 +221,7 @@ rtl_source_c::rtl_source_c (const std::string &args) throw std::runtime_error("Failed to enable offset tuning."); } - ret = rtlsdr_set_bias_tee(_dev, bias_tee); +// ret = rtlsdr_set_bias_tee(_dev, bias_tee); if (ret < 0) throw std::runtime_error("Failed to set bias tee."); diff --git a/lib/source_impl.cc b/lib/source_impl.cc index a28f314..ead4ef7 100644 --- a/lib/source_impl.cc +++ b/lib/source_impl.cc @@ -92,6 +92,9 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif #include "arg_helpers.h" #include "source_impl.h" @@ -171,6 +174,9 @@ source_impl::source_impl( const std::string &args ) #ifdef ENABLE_FREESRP dev_types.push_back("freesrp"); #endif +#ifdef ENABLE_PERSEUS + dev_types.push_back("perseus"); +#endif std::cerr << "gr-osmosdr " << GR_OSMOSDR_VERSION << " (" << GR_OSMOSDR_LIBVER << ") " << "gnuradio " << gr::version() << std::endl; @@ -252,7 +258,10 @@ source_impl::source_impl( const std::string &args ) BOOST_FOREACH( std::string dev, freesrp_source_c::get_devices() ) dev_list.push_back( dev ); #endif - +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + dev_list.push_back( dev ); +#endif // std::cerr << std::endl; // BOOST_FOREACH( std::string dev, dev_list ) // std::cerr << "'" << dev << "'" << std::endl; @@ -383,6 +392,13 @@ source_impl::source_impl( const std::string &args ) } #endif +#ifdef ENABLE_PERSEUS + if ( dict.count("perseus") ) { + perseus_source_c_sptr src = make_perseus_source_c( arg ); + block = src; iface = src.get(); + } +#endif + if ( iface != NULL && long(block.get()) != 0 ) { _devs.push_back( iface ); -- 1.9.1 >From 1b6cf50a7a6074754717b0270757931c379561bc Mon Sep 17 00:00:00 2001 From: Andrea Montefusco IW0HDV <andrew(a)montefusco.com> Date: Thu, 1 Feb 2018 17:33:39 +0100 Subject: More hardware controls added (attenuator, ADC preamp and dither, preselector) --- lib/perseus/perseus_source_c.cc | 136 ++++++++++++++++++++++++++++++++++++---- lib/perseus/perseus_source_c.h | 19 +++++- 2 files changed, 142 insertions(+), 13 deletions(-) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_c.cc index 0720da4..89674b1 100644 --- a/lib/perseus/perseus_source_c.cc +++ b/lib/perseus/perseus_source_c.cc @@ -89,7 +89,11 @@ perseus_source_c::perseus_source_c (const std::string &args) _center_freq(0), _freq_corr(0), _frun(false), - _cnt(0) + _cnt(0), + _att_value(0), + _adc_preamp(false), + _adc_dither(false), + _preselector(false) { //int ret; @@ -174,9 +178,9 @@ perseus_source_c::perseus_source_c (const std::string &args) PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); } - perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + perseus_set_attenuator_in_db(_dev, _att_value); // Enable ADC Dither, Disable ADC Preamp - perseus_set_adc(_dev, true, false); + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); // set the NCO frequency in the middle of the range allowed set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); set_sample_rate( get_sample_rates().start() ); @@ -425,7 +429,7 @@ double perseus_source_c::set_center_freq( double freq, size_t chan ) ret = perseus_set_ddc_center_freq(_dev, (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), - 1); + _preselector == true ? 1:0); if ( ret == PERSEUS_NOERROR ) { _center_freq = freq; } else { @@ -453,55 +457,165 @@ double perseus_source_c::get_freq_corr( size_t chan ) std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) { - return {}; + std::vector< std::string > names; + + names += "Attenuator"; + names += "ADC preamp"; + names += "ADC dither"; + + return names; } +// +// FIXME +// osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) { - return osmosdr::gain_range_t(); + return get_gain_range( "Attenuator", chan ); } osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return osmosdr::gain_range_t( -30, 0, 10 ); + } + if ( "ADC preamp" == name ) { + return osmosdr::gain_range_t( 0, 6, 6 ); + } + if ( "ADC dither" == name ) { + return osmosdr::gain_range_t( 0, 1, 1 ); + } + return osmosdr::gain_range_t(); } -double perseus_source_c::set_gain( double gain, size_t chan ) +double perseus_source_c::set_attenuator( double gain, size_t chan ) { + int ret; + + gain = - gain; + if (_dev && _att_value != gain) { + ret = perseus_set_attenuator_in_db (_dev, gain); + + if ( PERSEUS_NOERROR == ret ) { + _att_value = gain; + } else { + std::cerr << "ERROR: perseus_set_attenuator_in_db: " << gain << std::endl; + } + } + + return _att_value; +} + +double perseus_source_c::set_adc_preamp( double gain, size_t chan ) +{ + std::cerr << "set_adc_preamp: " << gain << std::endl; + + if (_dev) { + _adc_preamp = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +double perseus_source_c::set_adc_dither( double gain, size_t chan ) { + std::cerr << "set_adc_dither: " << gain << std::endl; + + if (_dev) { + _adc_dither = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::get_gain( size_t chan ) +double perseus_source_c::get_attenuator( size_t chan ) { - return 0.0; + return _att_value; } +double perseus_source_c::get_adc_preamp(size_t chan ) +{ + double v = _adc_preamp == true ? 6. : 0.; + std::cerr << "get_adc_preamp: " << _adc_preamp << " value" << v << std::endl; + return v; +} + +double perseus_source_c::get_adc_dither(size_t chan ) +{ + double v = _adc_dither == true ? 1. : 0.; + std::cerr << "get_adc_dither: " << _adc_dither << " value" << v << std::endl; + return v; +} + + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + if ( "Attenuator" == name ) { + return set_attenuator( gain, chan ); + } + if ( "ADC preamp" == name ) { + return set_adc_preamp( gain, chan ); + } + if ( "ADC dither" == name ) { + return set_adc_dither( gain, chan ); + } + return gain; +} + + double perseus_source_c::get_gain( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return get_attenuator( chan ); + } + if ( "ADC preamp" == name ) { + return get_adc_preamp( chan ); + } + if ( "ADC dither" == name ) { + return get_adc_dither( chan ); + } return 0.0; } + + std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) { std::vector< std::string > antennas; - antennas += get_antenna( chan ); + antennas += "RX"; + antennas += "RX+PRESELECTOR"; return antennas; } std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) { + if ( antenna == "RX" ) { + _preselector = false; + set_center_freq( get_center_freq() ); + return "RX"; + } + if ( antenna == "RX+PRESELECTOR" ) { + _preselector = true; + set_center_freq( get_center_freq() ); + return "RX+PRESELECTOR"; + } return get_antenna( chan ); } std::string perseus_source_c::get_antenna( size_t chan ) { + std::cerr << "perseus_source_c::get_antenna: " << chan << std::endl; return "RX"; } diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h index 9eda23d..934ff2b 100644 --- a/lib/perseus/perseus_source_c.h +++ b/lib/perseus/perseus_source_c.h @@ -87,9 +87,20 @@ public: std::vector<std::string> get_gain_names( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); - double set_gain( double gain, size_t chan = 0 ); + + double set_gain( double gain, size_t chan = 0 ) {return gain; } + double get_gain( size_t chan = 0 ) {return _att_value; } + + double set_attenuator( double gain, size_t chan = 0 ); + double get_attenuator( size_t chan = 0 ); + + double set_adc_preamp( double gain, size_t chan = 0 ); + double get_adc_preamp( size_t chan = 0 ); + + double set_adc_dither( double gain, size_t chan = 0 ); + double get_adc_dither( size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); - double get_gain( size_t chan = 0 ); double get_gain( const std::string & name, size_t chan = 0 ); std::vector< std::string > get_antennas( size_t chan = 0 ); @@ -115,6 +126,10 @@ private: bool _frun; int _cnt; + double _att_value; + bool _adc_preamp; + bool _adc_dither; + bool _preselector; }; #endif /* INCLUDED_PERSEUS_SOURCE_C_H */ -- 1.9.1 -- Andrea Montefusco IW0HDV ------------------------------------------ As my old boss, an Apollo veteran, would often remind us “It’s good to be smart, but it’s better to be lucky.” Wayne Hale, Space Shuttle Flight Director

2 2

[PATCH] gr-osmosdr Microtelecom Perseus HF receiver support
by andrea.montefusco＠gmail.com 02 Feb '18

02 Feb '18

Hi maintainer and all, Below you find a patch that implements Microtelecom Perseus support . I have testes it using gqrx SDR software. --- CMakeLists.txt | 1 + cmake/Modules/FindLibPERSEUS.cmake | 24 ++ lib/CMakeLists.txt | 8 + lib/airspy/airspy_source_c.cc | 5 +- lib/config.h.in | 1 + lib/device.cc | 8 + lib/perseus/CMakeLists.txt | 37 +++ lib/perseus/perseus_source_c.cc | 507 +++++++++++++++++++++++++++++++++++++ lib/perseus/perseus_source_c.h | 120 +++++++++ lib/rtl/rtl_source_c.cc | 2 +- lib/source_impl.cc | 18 +- 11 files changed, 727 insertions(+), 4 deletions(-) create mode 100644 cmake/Modules/FindLibPERSEUS.cmake create mode 100644 lib/perseus/CMakeLists.txt create mode 100644 lib/perseus/perseus_source_c.cc create mode 100644 lib/perseus/perseus_source_c.h diff --git a/CMakeLists.txt b/CMakeLists.txt index 296456d..94acd4c 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -173,6 +173,7 @@ find_package(Volk) find_package(LibbladeRF) find_package(SoapySDR NO_MODULE) find_package(LibFreeSRP) +find_package(LibPERSEUS) find_package(Doxygen) if(NOT GNURADIO_RUNTIME_FOUND) diff --git a/cmake/Modules/FindLibPERSEUS.cmake b/cmake/Modules/FindLibPERSEUS.cmake new file mode 100644 index 0000000..5477327 --- /dev/null +++ b/cmake/Modules/FindLibPERSEUS.cmake @@ -0,0 +1,24 @@ +INCLUDE(FindPkgConfig) +PKG_CHECK_MODULES(PC_LIBPERSEUS libperseus-sdr) + +FIND_PATH( + LIBPERSEUS_INCLUDE_DIRS + NAMES perseus-sdr.h + HINTS $ENV{LIBPERSEUS_DIR}/include + ${PC_LIBPERSEUS_INCLUDEDIR} + PATHS /usr/local/include + /usr/include +) + +FIND_LIBRARY( + LIBPERSEUS_LIBRARIES + NAMES perseus-sdr + HINTS $ENV{LIBPERSEUS_DIR}/lib + ${PC_LIBPERSEUS_LIBDIR} + PATHS /usr/local/lib + /usr/lib +) + +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBPERSEUS DEFAULT_MSG LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) +MARK_AS_ADVANCED(LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) diff --git a/lib/CMakeLists.txt b/lib/CMakeLists.txt index c05b8d9..f555816 100644 --- a/lib/CMakeLists.txt +++ b/lib/CMakeLists.txt @@ -249,6 +249,14 @@ GR_INCLUDE_SUBDIRECTORY(freesrp) endif(ENABLE_FREESRP) ######################################################################## +# Setup PERSEUS component +######################################################################## +GR_REGISTER_COMPONENT("Microtelecom Perseus Receiver" ENABLE_PERSEUS LIBPERSEUS_FOUND) +if(ENABLE_PERSEUS) +GR_INCLUDE_SUBDIRECTORY(perseus) +endif(ENABLE_PERSEUS) + +######################################################################## # Setup configuration file ######################################################################## ADD_DEFINITIONS(-DHAVE_CONFIG_H=1) diff --git a/lib/airspy/airspy_source_c.cc b/lib/airspy/airspy_source_c.cc index 50150e5..02fc6ab 100644 --- a/lib/airspy/airspy_source_c.cc +++ b/lib/airspy/airspy_source_c.cc @@ -350,9 +350,10 @@ osmosdr::meta_range_t airspy_source_c::get_sample_rates() { osmosdr::meta_range_t range; - for (size_t i = 0; i < _sample_rates.size(); i++) + for (size_t i = 0; i < _sample_rates.size(); i++) { + std::cerr << "SR: [" << i << "]: " << _sample_rates[i].first << std::endl; range += osmosdr::range_t( _sample_rates[i].first ); - + } return range; } diff --git a/lib/config.h.in b/lib/config.h.in index 42e72f1..dac7e39 100644 --- a/lib/config.h.in +++ b/lib/config.h.in @@ -19,6 +19,7 @@ #cmakedefine ENABLE_SOAPY #cmakedefine ENABLE_REDPITAYA #cmakedefine ENABLE_FREESRP +#cmakedefine ENABLE_PERSEUS //provide NAN define for MSVC older than VC12 #if defined(_MSC_VER) && (_MSC_VER < 1800) diff --git a/lib/device.cc b/lib/device.cc index 025a22b..df0d734 100644 --- a/lib/device.cc +++ b/lib/device.cc @@ -90,6 +90,10 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif + #include "arg_helpers.h" using namespace osmosdr; @@ -194,6 +198,10 @@ devices_t device::find(const device_t &hint) BOOST_FOREACH( std::string dev, soapy_source_c::get_devices() ) devices.push_back( device_t(dev) ); #endif +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + devices.push_back( device_t(dev) ); +#endif /* software-only sources should be appended at the very end, * hopefully resulting in hardware sources to be shown first diff --git a/lib/perseus/CMakeLists.txt b/lib/perseus/CMakeLists.txt new file mode 100644 index 0000000..f45a10d --- /dev/null +++ b/lib/perseus/CMakeLists.txt @@ -0,0 +1,37 @@ +# Copyright 2017 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +include_directories( + ${CMAKE_CURRENT_SOURCE_DIR} + ${LIBPERSEUS_INCLUDE_DIRS} +) + +set(perseus_srcs + ${CMAKE_CURRENT_SOURCE_DIR}/perseus_source_c.cc +) + +######################################################################## +# Append gnuradio-osmosdr library sources +######################################################################## +list(APPEND gr_osmosdr_srcs ${perseus_srcs}) +list(APPEND gr_osmosdr_libs ${LIBPERSEUS_LIBRARIES} ${GNURADIO_BLOCKS_LIBRARIES}) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_c.cc new file mode 100644 index 0000000..0720da4 --- /dev/null +++ b/lib/perseus/perseus_source_c.cc @@ -0,0 +1,507 @@ +/* -*- c++ -*- */ +/* + * Copyright 2018 Andrea Montefusco IW0HDV + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * config.h is generated by configure. It contains the results + * of probing for features, options etc. It should be the first + * file included in your .cc file. + */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdexcept> +#include <iostream> +#include <algorithm> + +#include <boost/assign.hpp> +#include <boost/format.hpp> +#include <boost/detail/endian.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/thread/thread.hpp> + +#include <gnuradio/io_signature.h> + +#include "perseus_source_c.h" +#include "arg_helpers.h" + + + +using namespace boost::assign; + +#define PERSEUS_FORMAT_ERROR(ret, msg) \ + boost::str( boost::format(msg " (%1%)") % ret ) + +#define PERSEUS_THROW_ON_ERROR(ret, msg) \ + if ( ret != PERSEUS_NOERROR ) \ + { \ + throw std::runtime_error( PERSEUS_FORMAT_ERROR(ret, msg) ); \ + } + +#define PERSEUS_FUNC_STR(func, arg) \ + boost::str(boost::format(func "(%1%)") % arg) + " has failed" + +perseus_source_c_sptr make_perseus_source_c (const std::string & args) +{ + return gnuradio::get_initial_sptr(new perseus_source_c (args)); +} + +/* + * Specify constraints on number of input and output streams. + * This info is used to construct the input and output signatures + * (2nd & 3rd args to gr::block's constructor). The input and + * output signatures are used by the runtime system to + * check that a valid number and type of inputs and outputs + * are connected to this block. In this case, we accept + * only 0 input and 1 output. + */ +static const int MIN_IN = 0; // mininum number of input streams +static const int MAX_IN = 0; // maximum number of input streams +static const int MIN_OUT = 1; // minimum number of output streams +static const int MAX_OUT = 1; // maximum number of output streams + +/* + * The private constructor + */ +perseus_source_c::perseus_source_c (const std::string &args) + : gr::sync_block ("perseus_source_c", + gr::io_signature::make(MIN_IN, MAX_IN, sizeof (gr_complex)), + gr::io_signature::make(MIN_OUT, MAX_OUT, sizeof (gr_complex))), + _dev(NULL), + _sample_rate(0), + _center_freq(0), + _freq_corr(0), + _frun(false), + _cnt(0) +{ + //int ret; + + dict_t dict = params_to_dict(args); + + _dev = NULL; + + // Set debug info dumped to stderr to the maximum verbose level + perseus_set_debug(3); + + //fprintf (stderr, "Revision: %s\n", git_revision); + //fprintf (stderr, "SAMPLE RATE: %d\n", sr); + //fprintf (stderr, "NBUF: %d BUF SIZE: %d TOTAL BUFFER LENGTH: %d\n", nb, bs, nb*bs); + + // Check how many Perseus receivers are connected to the system + int num_perseus = perseus_init(); + std::cerr << "## Microtelecom Perseus ctor: " << num_perseus << " Perseus receivers found." << std::endl; + + if (num_perseus==0) { + perseus_exit(); + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "No Perseus receivers detected"); + } + // Open the first one... + if ((_dev = perseus_open(0)) == NULL) { + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "Unable to open Perseus device"); + } + // Download the standard firmware to the unit + std::cerr << "Downloading firmware..." << std::endl; + if (int rc = perseus_firmware_download(_dev,NULL)<0) { + PERSEUS_THROW_ON_ERROR (rc, "firmware download error"); + } + + // Dump some information about the receiver (S/N and HW rev) + int flag; + perseus_is_preserie(_dev, &flag); + if (flag != 0) + fprintf(stderr, "The device is a preserie unit"); + else { + eeprom_prodid prodid; + if (perseus_get_product_id(_dev,&prodid)<0) + fprintf(stderr, "get product id error: %s", perseus_errorstr()); + else + fprintf(stderr, "Receiver S/N: %05d-%02hX%02hX-%02hX%02hX-%02hX%02hX - HW Release:%hd.%hd\n", + (uint16_t) prodid.sn, + (uint16_t) prodid.signature[5], + (uint16_t) prodid.signature[4], + (uint16_t) prodid.signature[3], + (uint16_t) prodid.signature[2], + (uint16_t) prodid.signature[1], + (uint16_t) prodid.signature[0], + (uint16_t) prodid.hwrel, + (uint16_t) prodid.hwver); + } + // Printing all sampling rates available ..... + { + int buf[BUFSIZ]; + + if (perseus_get_sampling_rates (_dev, buf, sizeof(buf)/sizeof(buf[0])) < 0) { + fprintf(stderr, "get sampling rates error: %s\n", perseus_errorstr()); + } else { + int i = 0; + while (buf[i]) { + fprintf(stderr, "#%d: sample rate: %d\n", i, buf[i]); + + _sample_rates.push_back( std::pair<double, uint32_t>( buf[i], i ) ); + i++; + } + /* since they may (and will) give us an unsorted array we have to sort it here + * to play nice with the monotonic requirement of meta-range later on */ + std::sort(_sample_rates.begin(), _sample_rates.end()); + + for (size_t i = 0; i < _sample_rates.size(); i++) + std::cerr << boost::format("%gM ") % (_sample_rates[i].first / 1e6); + + std::cerr << std::endl; + } + } + // Configure the receiver for 2 MS/s operations + fprintf(stderr, "Configuring FPGA...\n"); + if (int ret = perseus_set_sampling_rate(_dev, 96000) < 0) { // specify the sampling rate value in Samples/second + std::cerr << "fpga configuration error: " << perseus_errorstr() << std::endl; + PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); + } + + perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + // Enable ADC Dither, Disable ADC Preamp + perseus_set_adc(_dev, true, false); + // set the NCO frequency in the middle of the range allowed + set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); + set_sample_rate( get_sample_rates().start() ); + + _fifo = new boost::circular_buffer<gr_complex>(5000000); + if (!_fifo) { + throw std::runtime_error( std::string(__FUNCTION__) + " " + + "Failed to allocate a sample FIFO!" ); + } +} + +/* + * Our virtual destructor. + */ +perseus_source_c::~perseus_source_c () +{ + if (_dev) { + if (_frun) stop(); + int ret = perseus_close(_dev); + if ( ret != PERSEUS_NOERROR ) { + std::cerr << PERSEUS_FORMAT_ERROR(ret, "Failed to close Perseus") << std::endl; + } else + _dev = NULL; + } + perseus_exit(); + + if (_fifo) { + delete _fifo; + _fifo = NULL; + } +} + + +typedef union { + struct { + int32_t i; + int32_t q; + } __attribute__((__packed__)) iq; + struct { + uint8_t i1; + uint8_t i2; + uint8_t i3; + uint8_t i4; + uint8_t q1; + uint8_t q2; + uint8_t q3; + uint8_t q4; + } __attribute__((__packed__)) ; +} iq_sample; + + +int perseus_source_c::perseus_rx_callback(void *buf, int buf_size) +{ + size_t i, n_avail, to_copy, num_samples; + + uint8_t *samplebuf = (uint8_t*)buf; + + num_samples = buf_size/6; + + if (buf_size % 6) + std::cerr << "FATAL !!!!!!! not on boundary" << std::endl; + + iq_sample s; + + _fifo_lock.lock(); + + n_avail = _fifo->capacity() - _fifo->size(); + to_copy = (n_avail < num_samples ? n_avail : num_samples); + + for (i = 0; i < to_copy; i++ ) { + + s.i1 = s.q1 = 0; + s.i2 = *samplebuf++; + s.i3 = *samplebuf++; + s.i4 = *samplebuf++; + s.q2 = *samplebuf++; + s.q3 = *samplebuf++; + s.q4 = *samplebuf++; + + // convert 24 bit two's complements integers to float in [-1.0 - +1.0] range + + /* Push sample to the fifo */ + _fifo->push_back( gr_complex( (float)(s.iq.i) / (INT_MAX - 256), (float)(s.iq.q) / (INT_MAX - 256) ) ); + + } + // keep a counter of processed bytes + _cnt += buf_size; + + _fifo_lock.unlock(); + + /* We have made some new samples available to the consumer in work() */ + if (to_copy) { + //std::cerr << "+" << std::flush; + _samp_avail.notify_one(); + } + + /* Indicate overrun, if necessary */ + if (to_copy < num_samples) + std::cerr << "O" << std::flush; + + return 0; // TODO: return -1 on error/stop +} + +// static method used as callback from the libperseus-sdr library +int perseus_source_c::_perseus_rx_callback(void *buf, int buf_size, void *extra) +{ + perseus_source_c *obj = (perseus_source_c *)extra; + + return obj->perseus_rx_callback((float *)buf, buf_size); + + return 0; +} + + +bool perseus_source_c::start() +{ + int ret; + + if ( ! _dev ) + return false; + + std::cerr << "***** START COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + _frun = true; + + // in order to guarantee samples stream synchronization + // re-set the sample rate each time the stream is started + set_sample_rate( get_sample_rate() ); + + ret = perseus_start_async_input(_dev, + 6 * 1024 * 2 /* buffer size */, + perseus_source_c::_perseus_rx_callback, + (void *)this); + if (ret != PERSEUS_NOERROR) { + std::cerr << "Failed to start RX streaming (" + << ret << ")" << std::endl; + return false; + } else + return true; +} + +bool perseus_source_c::stop() +{ + if ( ! _dev ) + return false; + + _frun = false; + + std::cerr << "***** STOP COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + int ret = perseus_stop_async_input(_dev); + + if ( ret != PERSEUS_NOERROR ) { + std::cerr << "Failed to stop RX streaming (" << ret << ")" << std::endl; + return false; + } else + return true; +} + +int perseus_source_c::work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ) +{ + gr_complex *out = (gr_complex *)output_items[0]; + + if ( _frun == false ) return WORK_DONE; + + boost::unique_lock<boost::mutex> lock(_fifo_lock); + + /* Wait until we have the requested number of samples */ + int n_samples_avail = _fifo->size(); + + while (n_samples_avail < noutput_items) { + _samp_avail.wait(lock); + n_samples_avail = _fifo->size(); + } + + for(int i = 0; i < noutput_items; ++i) { + out[i] = _fifo->at(0); + _fifo->pop_front(); + } + + return noutput_items; +} + +std::vector<std::string> perseus_source_c::get_devices() +{ + std::vector<std::string> devices; + std::string label; + + std::string args = "perseus=0,label='Perseus'"; + devices.push_back( args ); + + return devices; +} + +size_t perseus_source_c::get_num_channels() +{ + return 1; +} + +osmosdr::meta_range_t perseus_source_c::get_sample_rates() +{ + osmosdr::meta_range_t range; + + for (size_t i = 0; i < _sample_rates.size(); i++) { + range += osmosdr::range_t( _sample_rates[i].first ); + std::cerr << "SR: " << i << " : (" + << _sample_rates[i].first << ")" << std::endl; + } + return range; +} + +double perseus_source_c::set_sample_rate( double rate ) +{ + int ret; + if ((ret = perseus_set_sampling_rate(_dev, rate)) < 0) { + PERSEUS_THROW_ON_ERROR(ret, "Unable to set sample rate."); + } else + _sample_rate = rate; + + return get_sample_rate(); +} + +double perseus_source_c::get_sample_rate() +{ + return _sample_rate; +} + +osmosdr::freq_range_t perseus_source_c::get_freq_range( size_t chan ) +{ + osmosdr::freq_range_t range; + + range += osmosdr::range_t( PERSEUS_DDC_FREQ_MIN, PERSEUS_DDC_FREQ_MAX ); + + return range; +} + +double perseus_source_c::set_center_freq( double freq, size_t chan ) +{ + int ret; + + if (_dev) { + ret = + perseus_set_ddc_center_freq(_dev, + (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), + 1); + if ( ret == PERSEUS_NOERROR ) { + _center_freq = freq; + } else { + PERSEUS_THROW_ON_ERROR( ret, PERSEUS_FUNC_STR( "perseus_set_ddc_center_freq", freq ) ) + } + } + + return get_center_freq( chan ); +} + +double perseus_source_c::get_center_freq( size_t chan ) +{ + return _center_freq; +} + +double perseus_source_c::set_freq_corr( double ppm, size_t chan ) +{ + return _freq_corr = ppm; +} + +double perseus_source_c::get_freq_corr( size_t chan ) +{ + return _freq_corr; +} + +std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) +{ + return {}; +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) +{ + return osmosdr::gain_range_t(); +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) +{ + return osmosdr::gain_range_t(); +} + + +double perseus_source_c::set_gain( double gain, size_t chan ) +{ + return gain; +} + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + return gain; +} + +double perseus_source_c::get_gain( size_t chan ) +{ + return 0.0; +} + +double perseus_source_c::get_gain( const std::string & name, size_t chan ) +{ + return 0.0; +} + +std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) +{ + std::vector< std::string > antennas; + + antennas += get_antenna( chan ); + + return antennas; +} + +std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) +{ + return get_antenna( chan ); +} + +std::string perseus_source_c::get_antenna( size_t chan ) +{ + return "RX"; +} diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h new file mode 100644 index 0000000..9eda23d --- /dev/null +++ b/lib/perseus/perseus_source_c.h @@ -0,0 +1,120 @@ +/* -*- c++ -*- */ +/* + * Copyright 2013 Dimitri Stolnikov <horiz0n(a)gmx.net> + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_PERSEUS_SOURCE_C_H +#define INCLUDED_PERSEUS_SOURCE_C_H + +#include <boost/circular_buffer.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread/condition_variable.hpp> + +#include <gnuradio/sync_block.h> + +#include "source_iface.h" +#include <perseus-sdr.h> + +class perseus_source_c; + +typedef boost::shared_ptr<perseus_source_c> perseus_source_c_sptr; + +/*! + * \brief Return a shared_ptr to a new instance of perseus_source_c. + * + * To avoid accidental use of raw pointers, perseus_source_c's + * constructor is private. make_perseus_source_c is the public + * interface for creating new instances. + */ +perseus_source_c_sptr make_perseus_source_c (const std::string & args = ""); + +/*! + * \brief Provides a stream of complex samples. + * \ingroup block + */ +class perseus_source_c : + public gr::sync_block, + public source_iface +{ +private: + // The friend declaration allows make_perseus_source_c to + // access the private constructor. + + friend perseus_source_c_sptr make_perseus_source_c (const std::string & args); + + perseus_source_c (const std::string & args); + +public: + ~perseus_source_c (); + + bool start(); + bool stop(); + + int work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ); + + static std::vector< std::string > get_devices(); + + size_t get_num_channels( void ); + + osmosdr::meta_range_t get_sample_rates( void ); + double set_sample_rate( double rate ); + double get_sample_rate( void ); + + osmosdr::freq_range_t get_freq_range( size_t chan = 0 ); + double set_center_freq( double freq, size_t chan = 0 ); + double get_center_freq( size_t chan = 0 ); + double set_freq_corr( double ppm, size_t chan = 0 ); + double get_freq_corr( size_t chan = 0 ); + + std::vector<std::string> get_gain_names( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); + double set_gain( double gain, size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); + double get_gain( size_t chan = 0 ); + double get_gain( const std::string & name, size_t chan = 0 ); + + std::vector< std::string > get_antennas( size_t chan = 0 ); + std::string set_antenna( const std::string & antenna, size_t chan = 0 ); + std::string get_antenna( size_t chan = 0 ); + + +private: + static int _perseus_rx_callback(void *buf, int buf_size, void *extra); + + int perseus_rx_callback(void *samples, int sample_count); + + perseus_descr *_dev; + + boost::circular_buffer<gr_complex> *_fifo; + boost::mutex _fifo_lock; + boost::condition_variable _samp_avail; + + std::vector< std::pair<double, uint32_t> > _sample_rates; + double _sample_rate; + double _center_freq; + double _freq_corr; + + bool _frun; + int _cnt; +}; + +#endif /* INCLUDED_PERSEUS_SOURCE_C_H */ diff --git a/lib/rtl/rtl_source_c.cc b/lib/rtl/rtl_source_c.cc index a371464..eb7042e 100644 --- a/lib/rtl/rtl_source_c.cc +++ b/lib/rtl/rtl_source_c.cc @@ -221,7 +221,7 @@ rtl_source_c::rtl_source_c (const std::string &args) throw std::runtime_error("Failed to enable offset tuning."); } - ret = rtlsdr_set_bias_tee(_dev, bias_tee); +// ret = rtlsdr_set_bias_tee(_dev, bias_tee); if (ret < 0) throw std::runtime_error("Failed to set bias tee."); diff --git a/lib/source_impl.cc b/lib/source_impl.cc index a28f314..ead4ef7 100644 --- a/lib/source_impl.cc +++ b/lib/source_impl.cc @@ -92,6 +92,9 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif #include "arg_helpers.h" #include "source_impl.h" @@ -171,6 +174,9 @@ source_impl::source_impl( const std::string &args ) #ifdef ENABLE_FREESRP dev_types.push_back("freesrp"); #endif +#ifdef ENABLE_PERSEUS + dev_types.push_back("perseus"); +#endif std::cerr << "gr-osmosdr " << GR_OSMOSDR_VERSION << " (" << GR_OSMOSDR_LIBVER << ") " << "gnuradio " << gr::version() << std::endl; @@ -252,7 +258,10 @@ source_impl::source_impl( const std::string &args ) BOOST_FOREACH( std::string dev, freesrp_source_c::get_devices() ) dev_list.push_back( dev ); #endif - +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + dev_list.push_back( dev ); +#endif // std::cerr << std::endl; // BOOST_FOREACH( std::string dev, dev_list ) // std::cerr << "'" << dev << "'" << std::endl; @@ -383,6 +392,13 @@ source_impl::source_impl( const std::string &args ) } #endif +#ifdef ENABLE_PERSEUS + if ( dict.count("perseus") ) { + perseus_source_c_sptr src = make_perseus_source_c( arg ); + block = src; iface = src.get(); + } +#endif + if ( iface != NULL && long(block.get()) != 0 ) { _devs.push_back( iface ); -- 1.9.1 >From 1b6cf50a7a6074754717b0270757931c379561bc Mon Sep 17 00:00:00 2001 From: Andrea Montefusco IW0HDV <andrew(a)montefusco.com> Date: Thu, 1 Feb 2018 17:33:39 +0100 Subject: More hardware controls added (attenuator, ADC preamp and dither, preselector) --- lib/perseus/perseus_source_c.cc | 136 ++++++++++++++++++++++++++++++++++++---- lib/perseus/perseus_source_c.h | 19 +++++- 2 files changed, 142 insertions(+), 13 deletions(-) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_c.cc index 0720da4..89674b1 100644 --- a/lib/perseus/perseus_source_c.cc +++ b/lib/perseus/perseus_source_c.cc @@ -89,7 +89,11 @@ perseus_source_c::perseus_source_c (const std::string &args) _center_freq(0), _freq_corr(0), _frun(false), - _cnt(0) + _cnt(0), + _att_value(0), + _adc_preamp(false), + _adc_dither(false), + _preselector(false) { //int ret; @@ -174,9 +178,9 @@ perseus_source_c::perseus_source_c (const std::string &args) PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); } - perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + perseus_set_attenuator_in_db(_dev, _att_value); // Enable ADC Dither, Disable ADC Preamp - perseus_set_adc(_dev, true, false); + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); // set the NCO frequency in the middle of the range allowed set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); set_sample_rate( get_sample_rates().start() ); @@ -425,7 +429,7 @@ double perseus_source_c::set_center_freq( double freq, size_t chan ) ret = perseus_set_ddc_center_freq(_dev, (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), - 1); + _preselector == true ? 1:0); if ( ret == PERSEUS_NOERROR ) { _center_freq = freq; } else { @@ -453,55 +457,165 @@ double perseus_source_c::get_freq_corr( size_t chan ) std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) { - return {}; + std::vector< std::string > names; + + names += "Attenuator"; + names += "ADC preamp"; + names += "ADC dither"; + + return names; } +// +// FIXME +// osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) { - return osmosdr::gain_range_t(); + return get_gain_range( "Attenuator", chan ); } osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return osmosdr::gain_range_t( -30, 0, 10 ); + } + if ( "ADC preamp" == name ) { + return osmosdr::gain_range_t( 0, 6, 6 ); + } + if ( "ADC dither" == name ) { + return osmosdr::gain_range_t( 0, 1, 1 ); + } + return osmosdr::gain_range_t(); } -double perseus_source_c::set_gain( double gain, size_t chan ) +double perseus_source_c::set_attenuator( double gain, size_t chan ) { + int ret; + + gain = - gain; + if (_dev && _att_value != gain) { + ret = perseus_set_attenuator_in_db (_dev, gain); + + if ( PERSEUS_NOERROR == ret ) { + _att_value = gain; + } else { + std::cerr << "ERROR: perseus_set_attenuator_in_db: " << gain << std::endl; + } + } + + return _att_value; +} + +double perseus_source_c::set_adc_preamp( double gain, size_t chan ) +{ + std::cerr << "set_adc_preamp: " << gain << std::endl; + + if (_dev) { + _adc_preamp = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +double perseus_source_c::set_adc_dither( double gain, size_t chan ) { + std::cerr << "set_adc_dither: " << gain << std::endl; + + if (_dev) { + _adc_dither = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::get_gain( size_t chan ) +double perseus_source_c::get_attenuator( size_t chan ) { - return 0.0; + return _att_value; } +double perseus_source_c::get_adc_preamp(size_t chan ) +{ + double v = _adc_preamp == true ? 6. : 0.; + std::cerr << "get_adc_preamp: " << _adc_preamp << " value" << v << std::endl; + return v; +} + +double perseus_source_c::get_adc_dither(size_t chan ) +{ + double v = _adc_dither == true ? 1. : 0.; + std::cerr << "get_adc_dither: " << _adc_dither << " value" << v << std::endl; + return v; +} + + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + if ( "Attenuator" == name ) { + return set_attenuator( gain, chan ); + } + if ( "ADC preamp" == name ) { + return set_adc_preamp( gain, chan ); + } + if ( "ADC dither" == name ) { + return set_adc_dither( gain, chan ); + } + return gain; +} + + double perseus_source_c::get_gain( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return get_attenuator( chan ); + } + if ( "ADC preamp" == name ) { + return get_adc_preamp( chan ); + } + if ( "ADC dither" == name ) { + return get_adc_dither( chan ); + } return 0.0; } + + std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) { std::vector< std::string > antennas; - antennas += get_antenna( chan ); + antennas += "RX"; + antennas += "RX+PRESELECTOR"; return antennas; } std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) { + if ( antenna == "RX" ) { + _preselector = false; + set_center_freq( get_center_freq() ); + return "RX"; + } + if ( antenna == "RX+PRESELECTOR" ) { + _preselector = true; + set_center_freq( get_center_freq() ); + return "RX+PRESELECTOR"; + } return get_antenna( chan ); } std::string perseus_source_c::get_antenna( size_t chan ) { + std::cerr << "perseus_source_c::get_antenna: " << chan << std::endl; return "RX"; } diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h index 9eda23d..934ff2b 100644 --- a/lib/perseus/perseus_source_c.h +++ b/lib/perseus/perseus_source_c.h @@ -87,9 +87,20 @@ public: std::vector<std::string> get_gain_names( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); - double set_gain( double gain, size_t chan = 0 ); + + double set_gain( double gain, size_t chan = 0 ) {return gain; } + double get_gain( size_t chan = 0 ) {return _att_value; } + + double set_attenuator( double gain, size_t chan = 0 ); + double get_attenuator( size_t chan = 0 ); + + double set_adc_preamp( double gain, size_t chan = 0 ); + double get_adc_preamp( size_t chan = 0 ); + + double set_adc_dither( double gain, size_t chan = 0 ); + double get_adc_dither( size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); - double get_gain( size_t chan = 0 ); double get_gain( const std::string & name, size_t chan = 0 ); std::vector< std::string > get_antennas( size_t chan = 0 ); @@ -115,6 +126,10 @@ private: bool _frun; int _cnt; + double _att_value; + bool _adc_preamp; + bool _adc_dither; + bool _preselector; }; #endif /* INCLUDED_PERSEUS_SOURCE_C_H */ -- 1.9.1 . QUIT

1 0

Fwd: [PATCH] gr-osmosdr Microtelecom Perseus HF receiver support
by andrea montefusco 02 Feb '18

02 Feb '18

---------- Forwarded message ---------- From: <andrea.montefusco(a)gmail.com> Date: Fri, Feb 2, 2018 at 8:25 PM Subject: [PATCH] gr-osmosdr Microtelecom Perseus HF receiver support To: andrea.montefusco(a)gmail.com Hi maintainer and all, Below you find a patch that implements Microtelecom Perseus support . I have testes it using gqrx SDR software. --- CMakeLists.txt | 1 + cmake/Modules/FindLibPERSEUS.cmake | 24 ++ lib/CMakeLists.txt | 8 + lib/airspy/airspy_source_c.cc | 5 +- lib/config.h.in | 1 + lib/device.cc | 8 + lib/perseus/CMakeLists.txt | 37 +++ lib/perseus/perseus_source_c.cc | 507 ++++++++++++++++++++++++++++++ +++++++ lib/perseus/perseus_source_c.h | 120 +++++++++ lib/rtl/rtl_source_c.cc | 2 +- lib/source_impl.cc | 18 +- 11 files changed, 727 insertions(+), 4 deletions(-) create mode 100644 cmake/Modules/FindLibPERSEUS.cmake create mode 100644 lib/perseus/CMakeLists.txt create mode 100644 lib/perseus/perseus_source_c.cc create mode 100644 lib/perseus/perseus_source_c.h diff --git a/CMakeLists.txt b/CMakeLists.txt index 296456d..94acd4c 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -173,6 +173,7 @@ find_package(Volk) find_package(LibbladeRF) find_package(SoapySDR NO_MODULE) find_package(LibFreeSRP) +find_package(LibPERSEUS) find_package(Doxygen) if(NOT GNURADIO_RUNTIME_FOUND) diff --git a/cmake/Modules/FindLibPERSEUS.cmake b/cmake/Modules/ FindLibPERSEUS.cmake new file mode 100644 index 0000000..5477327 --- /dev/null +++ b/cmake/Modules/FindLibPERSEUS.cmake @@ -0,0 +1,24 @@ +INCLUDE(FindPkgConfig) +PKG_CHECK_MODULES(PC_LIBPERSEUS libperseus-sdr) + +FIND_PATH( + LIBPERSEUS_INCLUDE_DIRS + NAMES perseus-sdr.h + HINTS $ENV{LIBPERSEUS_DIR}/include + ${PC_LIBPERSEUS_INCLUDEDIR} + PATHS /usr/local/include + /usr/include +) + +FIND_LIBRARY( + LIBPERSEUS_LIBRARIES + NAMES perseus-sdr + HINTS $ENV{LIBPERSEUS_DIR}/lib + ${PC_LIBPERSEUS_LIBDIR} + PATHS /usr/local/lib + /usr/lib +) + +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBPERSEUS DEFAULT_MSG LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) +MARK_AS_ADVANCED(LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) diff --git a/lib/CMakeLists.txt b/lib/CMakeLists.txt index c05b8d9..f555816 100644 --- a/lib/CMakeLists.txt +++ b/lib/CMakeLists.txt @@ -249,6 +249,14 @@ GR_INCLUDE_SUBDIRECTORY(freesrp) endif(ENABLE_FREESRP) ######################################################################## +# Setup PERSEUS component +######################################################################## +GR_REGISTER_COMPONENT("Microtelecom Perseus Receiver" ENABLE_PERSEUS LIBPERSEUS_FOUND) +if(ENABLE_PERSEUS) +GR_INCLUDE_SUBDIRECTORY(perseus) +endif(ENABLE_PERSEUS) + +######################################################################## # Setup configuration file ######################################################################## ADD_DEFINITIONS(-DHAVE_CONFIG_H=1) diff --git a/lib/airspy/airspy_source_c.cc b/lib/airspy/airspy_source_c.cc index 50150e5..02fc6ab 100644 --- a/lib/airspy/airspy_source_c.cc +++ b/lib/airspy/airspy_source_c.cc @@ -350,9 +350,10 @@ osmosdr::meta_range_t airspy_source_c::get_sample_ rates() { osmosdr::meta_range_t range; - for (size_t i = 0; i < _sample_rates.size(); i++) + for (size_t i = 0; i < _sample_rates.size(); i++) { + std::cerr << "SR: [" << i << "]: " << _sample_rates[i].first << std::endl; range += osmosdr::range_t( _sample_rates[i].first ); - + } return range; } diff --git a/lib/config.h.in b/lib/config.h.in index 42e72f1..dac7e39 100644 --- a/lib/config.h.in +++ b/lib/config.h.in @@ -19,6 +19,7 @@ #cmakedefine ENABLE_SOAPY #cmakedefine ENABLE_REDPITAYA #cmakedefine ENABLE_FREESRP +#cmakedefine ENABLE_PERSEUS //provide NAN define for MSVC older than VC12 #if defined(_MSC_VER) && (_MSC_VER < 1800) diff --git a/lib/device.cc b/lib/device.cc index 025a22b..df0d734 100644 --- a/lib/device.cc +++ b/lib/device.cc @@ -90,6 +90,10 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif + #include "arg_helpers.h" using namespace osmosdr; @@ -194,6 +198,10 @@ devices_t device::find(const device_t &hint) BOOST_FOREACH( std::string dev, soapy_source_c::get_devices() ) devices.push_back( device_t(dev) ); #endif +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + devices.push_back( device_t(dev) ); +#endif /* software-only sources should be appended at the very end, * hopefully resulting in hardware sources to be shown first diff --git a/lib/perseus/CMakeLists.txt b/lib/perseus/CMakeLists.txt new file mode 100644 index 0000000..f45a10d --- /dev/null +++ b/lib/perseus/CMakeLists.txt @@ -0,0 +1,37 @@ +# Copyright 2017 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +include_directories( + ${CMAKE_CURRENT_SOURCE_DIR} + ${LIBPERSEUS_INCLUDE_DIRS} +) + +set(perseus_srcs + ${CMAKE_CURRENT_SOURCE_DIR}/perseus_source_c.cc +) + +######################################################################## +# Append gnuradio-osmosdr library sources +######################################################################## +list(APPEND gr_osmosdr_srcs ${perseus_srcs}) +list(APPEND gr_osmosdr_libs ${LIBPERSEUS_LIBRARIES} ${GNURADIO_BLOCKS_LIBRARIES}) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_ c.cc new file mode 100644 index 0000000..0720da4 --- /dev/null +++ b/lib/perseus/perseus_source_c.cc @@ -0,0 +1,507 @@ +/* -*- c++ -*- */ +/* + * Copyright 2018 Andrea Montefusco IW0HDV + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * config.h is generated by configure. It contains the results + * of probing for features, options etc. It should be the first + * file included in your .cc file. + */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdexcept> +#include <iostream> +#include <algorithm> + +#include <boost/assign.hpp> +#include <boost/format.hpp> +#include <boost/detail/endian.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/thread/thread.hpp> + +#include <gnuradio/io_signature.h> + +#include "perseus_source_c.h" +#include "arg_helpers.h" + + + +using namespace boost::assign; + +#define PERSEUS_FORMAT_ERROR(ret, msg) \ + boost::str( boost::format(msg " (%1%)") % ret ) + +#define PERSEUS_THROW_ON_ERROR(ret, msg) \ + if ( ret != PERSEUS_NOERROR ) \ + { \ + throw std::runtime_error( PERSEUS_FORMAT_ERROR(ret, msg) ); \ + } + +#define PERSEUS_FUNC_STR(func, arg) \ + boost::str(boost::format(func "(%1%)") % arg) + " has failed" + +perseus_source_c_sptr make_perseus_source_c (const std::string & args) +{ + return gnuradio::get_initial_sptr(new perseus_source_c (args)); +} + +/* + * Specify constraints on number of input and output streams. + * This info is used to construct the input and output signatures + * (2nd & 3rd args to gr::block's constructor). The input and + * output signatures are used by the runtime system to + * check that a valid number and type of inputs and outputs + * are connected to this block. In this case, we accept + * only 0 input and 1 output. + */ +static const int MIN_IN = 0; // mininum number of input streams +static const int MAX_IN = 0; // maximum number of input streams +static const int MIN_OUT = 1; // minimum number of output streams +static const int MAX_OUT = 1; // maximum number of output streams + +/* + * The private constructor + */ +perseus_source_c::perseus_source_c (const std::string &args) + : gr::sync_block ("perseus_source_c", + gr::io_signature::make(MIN_IN, MAX_IN, sizeof (gr_complex)), + gr::io_signature::make(MIN_OUT, MAX_OUT, sizeof (gr_complex))), + _dev(NULL), + _sample_rate(0), + _center_freq(0), + _freq_corr(0), + _frun(false), + _cnt(0) +{ + //int ret; + + dict_t dict = params_to_dict(args); + + _dev = NULL; + + // Set debug info dumped to stderr to the maximum verbose level + perseus_set_debug(3); + + //fprintf (stderr, "Revision: %s\n", git_revision); + //fprintf (stderr, "SAMPLE RATE: %d\n", sr); + //fprintf (stderr, "NBUF: %d BUF SIZE: %d TOTAL BUFFER LENGTH: %d\n", nb, bs, nb*bs); + + // Check how many Perseus receivers are connected to the system + int num_perseus = perseus_init(); + std::cerr << "## Microtelecom Perseus ctor: " << num_perseus << " Perseus receivers found." << std::endl; + + if (num_perseus==0) { + perseus_exit(); + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "No Perseus receivers detected"); + } + // Open the first one... + if ((_dev = perseus_open(0)) == NULL) { + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "Unable to open Perseus device"); + } + // Download the standard firmware to the unit + std::cerr << "Downloading firmware..." << std::endl; + if (int rc = perseus_firmware_download(_dev,NULL)<0) { + PERSEUS_THROW_ON_ERROR (rc, "firmware download error"); + } + + // Dump some information about the receiver (S/N and HW rev) + int flag; + perseus_is_preserie(_dev, &flag); + if (flag != 0) + fprintf(stderr, "The device is a preserie unit"); + else { + eeprom_prodid prodid; + if (perseus_get_product_id(_dev,&prodid)<0) + fprintf(stderr, "get product id error: %s", perseus_errorstr()); + else + fprintf(stderr, "Receiver S/N: %05d-%02hX%02hX-%02hX%02hX-%02hX%02hX - HW Release:%hd.%hd\n", + (uint16_t) prodid.sn, + (uint16_t) prodid.signature[5], + (uint16_t) prodid.signature[4], + (uint16_t) prodid.signature[3], + (uint16_t) prodid.signature[2], + (uint16_t) prodid.signature[1], + (uint16_t) prodid.signature[0], + (uint16_t) prodid.hwrel, + (uint16_t) prodid.hwver); + } + // Printing all sampling rates available ..... + { + int buf[BUFSIZ]; + + if (perseus_get_sampling_rates (_dev, buf, sizeof(buf)/sizeof(buf[0])) < 0) { + fprintf(stderr, "get sampling rates error: %s\n", perseus_errorstr()); + } else { + int i = 0; + while (buf[i]) { + fprintf(stderr, "#%d: sample rate: %d\n", i, buf[i]); + + _sample_rates.push_back( std::pair<double, uint32_t>( buf[i], i ) ); + i++; + } + /* since they may (and will) give us an unsorted array we have to sort it here + * to play nice with the monotonic requirement of meta-range later on */ + std::sort(_sample_rates.begin(), _sample_rates.end()); + + for (size_t i = 0; i < _sample_rates.size(); i++) + std::cerr << boost::format("%gM ") % (_sample_rates[i].first / 1e6); + + std::cerr << std::endl; + } + } + // Configure the receiver for 2 MS/s operations + fprintf(stderr, "Configuring FPGA...\n"); + if (int ret = perseus_set_sampling_rate(_dev, 96000) < 0) { // specify the sampling rate value in Samples/second + std::cerr << "fpga configuration error: " << perseus_errorstr() << std::endl; + PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); + } + + perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + // Enable ADC Dither, Disable ADC Preamp + perseus_set_adc(_dev, true, false); + // set the NCO frequency in the middle of the range allowed + set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); + set_sample_rate( get_sample_rates().start() ); + + _fifo = new boost::circular_buffer<gr_complex>(5000000); + if (!_fifo) { + throw std::runtime_error( std::string(__FUNCTION__) + " " + + "Failed to allocate a sample FIFO!" ); + } +} + +/* + * Our virtual destructor. + */ +perseus_source_c::~perseus_source_c () +{ + if (_dev) { + if (_frun) stop(); + int ret = perseus_close(_dev); + if ( ret != PERSEUS_NOERROR ) { + std::cerr << PERSEUS_FORMAT_ERROR(ret, "Failed to close Perseus") << std::endl; + } else + _dev = NULL; + } + perseus_exit(); + + if (_fifo) { + delete _fifo; + _fifo = NULL; + } +} + + +typedef union { + struct { + int32_t i; + int32_t q; + } __attribute__((__packed__)) iq; + struct { + uint8_t i1; + uint8_t i2; + uint8_t i3; + uint8_t i4; + uint8_t q1; + uint8_t q2; + uint8_t q3; + uint8_t q4; + } __attribute__((__packed__)) ; +} iq_sample; + + +int perseus_source_c::perseus_rx_callback(void *buf, int buf_size) +{ + size_t i, n_avail, to_copy, num_samples; + + uint8_t *samplebuf = (uint8_t*)buf; + + num_samples = buf_size/6; + + if (buf_size % 6) + std::cerr << "FATAL !!!!!!! not on boundary" << std::endl; + + iq_sample s; + + _fifo_lock.lock(); + + n_avail = _fifo->capacity() - _fifo->size(); + to_copy = (n_avail < num_samples ? n_avail : num_samples); + + for (i = 0; i < to_copy; i++ ) { + + s.i1 = s.q1 = 0; + s.i2 = *samplebuf++; + s.i3 = *samplebuf++; + s.i4 = *samplebuf++; + s.q2 = *samplebuf++; + s.q3 = *samplebuf++; + s.q4 = *samplebuf++; + + // convert 24 bit two's complements integers to float in [-1.0 - +1.0] range + + /* Push sample to the fifo */ + _fifo->push_back( gr_complex( (float)(s.iq.i) / (INT_MAX - 256), (float)(s.iq.q) / (INT_MAX - 256) ) ); + + } + // keep a counter of processed bytes + _cnt += buf_size; + + _fifo_lock.unlock(); + + /* We have made some new samples available to the consumer in work() */ + if (to_copy) { + //std::cerr << "+" << std::flush; + _samp_avail.notify_one(); + } + + /* Indicate overrun, if necessary */ + if (to_copy < num_samples) + std::cerr << "O" << std::flush; + + return 0; // TODO: return -1 on error/stop +} + +// static method used as callback from the libperseus-sdr library +int perseus_source_c::_perseus_rx_callback(void *buf, int buf_size, void *extra) +{ + perseus_source_c *obj = (perseus_source_c *)extra; + + return obj->perseus_rx_callback((float *)buf, buf_size); + + return 0; +} + + +bool perseus_source_c::start() +{ + int ret; + + if ( ! _dev ) + return false; + + std::cerr << "***** START COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + _frun = true; + + // in order to guarantee samples stream synchronization + // re-set the sample rate each time the stream is started + set_sample_rate( get_sample_rate() ); + + ret = perseus_start_async_input(_dev, + 6 * 1024 * 2 /* buffer size */, + perseus_source_c::_perseus_rx_callback, + (void *)this); + if (ret != PERSEUS_NOERROR) { + std::cerr << "Failed to start RX streaming (" + << ret << ")" << std::endl; + return false; + } else + return true; +} + +bool perseus_source_c::stop() +{ + if ( ! _dev ) + return false; + + _frun = false; + + std::cerr << "***** STOP COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + int ret = perseus_stop_async_input(_dev); + + if ( ret != PERSEUS_NOERROR ) { + std::cerr << "Failed to stop RX streaming (" << ret << ")" << std::endl; + return false; + } else + return true; +} + +int perseus_source_c::work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ) +{ + gr_complex *out = (gr_complex *)output_items[0]; + + if ( _frun == false ) return WORK_DONE; + + boost::unique_lock<boost::mutex> lock(_fifo_lock); + + /* Wait until we have the requested number of samples */ + int n_samples_avail = _fifo->size(); + + while (n_samples_avail < noutput_items) { + _samp_avail.wait(lock); + n_samples_avail = _fifo->size(); + } + + for(int i = 0; i < noutput_items; ++i) { + out[i] = _fifo->at(0); + _fifo->pop_front(); + } + + return noutput_items; +} + +std::vector<std::string> perseus_source_c::get_devices() +{ + std::vector<std::string> devices; + std::string label; + + std::string args = "perseus=0,label='Perseus'"; + devices.push_back( args ); + + return devices; +} + +size_t perseus_source_c::get_num_channels() +{ + return 1; +} + +osmosdr::meta_range_t perseus_source_c::get_sample_rates() +{ + osmosdr::meta_range_t range; + + for (size_t i = 0; i < _sample_rates.size(); i++) { + range += osmosdr::range_t( _sample_rates[i].first ); + std::cerr << "SR: " << i << " : (" + << _sample_rates[i].first << ")" << std::endl; + } + return range; +} + +double perseus_source_c::set_sample_rate( double rate ) +{ + int ret; + if ((ret = perseus_set_sampling_rate(_dev, rate)) < 0) { + PERSEUS_THROW_ON_ERROR(ret, "Unable to set sample rate."); + } else + _sample_rate = rate; + + return get_sample_rate(); +} + +double perseus_source_c::get_sample_rate() +{ + return _sample_rate; +} + +osmosdr::freq_range_t perseus_source_c::get_freq_range( size_t chan ) +{ + osmosdr::freq_range_t range; + + range += osmosdr::range_t( PERSEUS_DDC_FREQ_MIN, PERSEUS_DDC_FREQ_MAX ); + + return range; +} + +double perseus_source_c::set_center_freq( double freq, size_t chan ) +{ + int ret; + + if (_dev) { + ret = + perseus_set_ddc_center_freq(_dev, + (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), + 1); + if ( ret == PERSEUS_NOERROR ) { + _center_freq = freq; + } else { + PERSEUS_THROW_ON_ERROR( ret, PERSEUS_FUNC_STR( "perseus_set_ddc_center_freq", freq ) ) + } + } + + return get_center_freq( chan ); +} + +double perseus_source_c::get_center_freq( size_t chan ) +{ + return _center_freq; +} + +double perseus_source_c::set_freq_corr( double ppm, size_t chan ) +{ + return _freq_corr = ppm; +} + +double perseus_source_c::get_freq_corr( size_t chan ) +{ + return _freq_corr; +} + +std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) +{ + return {}; +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) +{ + return osmosdr::gain_range_t(); +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) +{ + return osmosdr::gain_range_t(); +} + + +double perseus_source_c::set_gain( double gain, size_t chan ) +{ + return gain; +} + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + return gain; +} + +double perseus_source_c::get_gain( size_t chan ) +{ + return 0.0; +} + +double perseus_source_c::get_gain( const std::string & name, size_t chan ) +{ + return 0.0; +} + +std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) +{ + std::vector< std::string > antennas; + + antennas += get_antenna( chan ); + + return antennas; +} + +std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) +{ + return get_antenna( chan ); +} + +std::string perseus_source_c::get_antenna( size_t chan ) +{ + return "RX"; +} diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h new file mode 100644 index 0000000..9eda23d --- /dev/null +++ b/lib/perseus/perseus_source_c.h @@ -0,0 +1,120 @@ +/* -*- c++ -*- */ +/* + * Copyright 2013 Dimitri Stolnikov <horiz0n(a)gmx.net> + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_PERSEUS_SOURCE_C_H +#define INCLUDED_PERSEUS_SOURCE_C_H + +#include <boost/circular_buffer.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread/condition_variable.hpp> + +#include <gnuradio/sync_block.h> + +#include "source_iface.h" +#include <perseus-sdr.h> + +class perseus_source_c; + +typedef boost::shared_ptr<perseus_source_c> perseus_source_c_sptr; + +/*! + * \brief Return a shared_ptr to a new instance of perseus_source_c. + * + * To avoid accidental use of raw pointers, perseus_source_c's + * constructor is private. make_perseus_source_c is the public + * interface for creating new instances. + */ +perseus_source_c_sptr make_perseus_source_c (const std::string & args = ""); + +/*! + * \brief Provides a stream of complex samples. + * \ingroup block + */ +class perseus_source_c : + public gr::sync_block, + public source_iface +{ +private: + // The friend declaration allows make_perseus_source_c to + // access the private constructor. + + friend perseus_source_c_sptr make_perseus_source_c (const std::string & args); + + perseus_source_c (const std::string & args); + +public: + ~perseus_source_c (); + + bool start(); + bool stop(); + + int work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ); + + static std::vector< std::string > get_devices(); + + size_t get_num_channels( void ); + + osmosdr::meta_range_t get_sample_rates( void ); + double set_sample_rate( double rate ); + double get_sample_rate( void ); + + osmosdr::freq_range_t get_freq_range( size_t chan = 0 ); + double set_center_freq( double freq, size_t chan = 0 ); + double get_center_freq( size_t chan = 0 ); + double set_freq_corr( double ppm, size_t chan = 0 ); + double get_freq_corr( size_t chan = 0 ); + + std::vector<std::string> get_gain_names( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); + double set_gain( double gain, size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); + double get_gain( size_t chan = 0 ); + double get_gain( const std::string & name, size_t chan = 0 ); + + std::vector< std::string > get_antennas( size_t chan = 0 ); + std::string set_antenna( const std::string & antenna, size_t chan = 0 ); + std::string get_antenna( size_t chan = 0 ); + + +private: + static int _perseus_rx_callback(void *buf, int buf_size, void *extra); + + int perseus_rx_callback(void *samples, int sample_count); + + perseus_descr *_dev; + + boost::circular_buffer<gr_complex> *_fifo; + boost::mutex _fifo_lock; + boost::condition_variable _samp_avail; + + std::vector< std::pair<double, uint32_t> > _sample_rates; + double _sample_rate; + double _center_freq; + double _freq_corr; + + bool _frun; + int _cnt; +}; + +#endif /* INCLUDED_PERSEUS_SOURCE_C_H */ diff --git a/lib/rtl/rtl_source_c.cc b/lib/rtl/rtl_source_c.cc index a371464..eb7042e 100644 --- a/lib/rtl/rtl_source_c.cc +++ b/lib/rtl/rtl_source_c.cc @@ -221,7 +221,7 @@ rtl_source_c::rtl_source_c (const std::string &args) throw std::runtime_error("Failed to enable offset tuning."); } - ret = rtlsdr_set_bias_tee(_dev, bias_tee); +// ret = rtlsdr_set_bias_tee(_dev, bias_tee); if (ret < 0) throw std::runtime_error("Failed to set bias tee."); diff --git a/lib/source_impl.cc b/lib/source_impl.cc index a28f314..ead4ef7 100644 --- a/lib/source_impl.cc +++ b/lib/source_impl.cc @@ -92,6 +92,9 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif #include "arg_helpers.h" #include "source_impl.h" @@ -171,6 +174,9 @@ source_impl::source_impl( const std::string &args ) #ifdef ENABLE_FREESRP dev_types.push_back("freesrp"); #endif +#ifdef ENABLE_PERSEUS + dev_types.push_back("perseus"); +#endif std::cerr << "gr-osmosdr " << GR_OSMOSDR_VERSION << " (" << GR_OSMOSDR_LIBVER << ") " << "gnuradio " << gr::version() << std::endl; @@ -252,7 +258,10 @@ source_impl::source_impl( const std::string &args ) BOOST_FOREACH( std::string dev, freesrp_source_c::get_devices() ) dev_list.push_back( dev ); #endif - +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + dev_list.push_back( dev ); +#endif // std::cerr << std::endl; // BOOST_FOREACH( std::string dev, dev_list ) // std::cerr << "'" << dev << "'" << std::endl; @@ -383,6 +392,13 @@ source_impl::source_impl( const std::string &args ) } #endif +#ifdef ENABLE_PERSEUS + if ( dict.count("perseus") ) { + perseus_source_c_sptr src = make_perseus_source_c( arg ); + block = src; iface = src.get(); + } +#endif + if ( iface != NULL && long(block.get()) != 0 ) { _devs.push_back( iface ); -- 1.9.1 >From 1b6cf50a7a6074754717b0270757931c379561bc Mon Sep 17 00:00:00 2001 From: Andrea Montefusco IW0HDV <andrew(a)montefusco.com> Date: Thu, 1 Feb 2018 17:33:39 +0100 Subject: More hardware controls added (attenuator, ADC preamp and dither, preselector) --- lib/perseus/perseus_source_c.cc | 136 ++++++++++++++++++++++++++++++ ++++++---- lib/perseus/perseus_source_c.h | 19 +++++- 2 files changed, 142 insertions(+), 13 deletions(-) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_ c.cc index 0720da4..89674b1 100644 --- a/lib/perseus/perseus_source_c.cc +++ b/lib/perseus/perseus_source_c.cc @@ -89,7 +89,11 @@ perseus_source_c::perseus_source_c (const std::string &args) _center_freq(0), _freq_corr(0), _frun(false), - _cnt(0) + _cnt(0), + _att_value(0), + _adc_preamp(false), + _adc_dither(false), + _preselector(false) { //int ret; @@ -174,9 +178,9 @@ perseus_source_c::perseus_source_c (const std::string &args) PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); } - perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + perseus_set_attenuator_in_db(_dev, _att_value); // Enable ADC Dither, Disable ADC Preamp - perseus_set_adc(_dev, true, false); + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); // set the NCO frequency in the middle of the range allowed set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); set_sample_rate( get_sample_rates().start() ); @@ -425,7 +429,7 @@ double perseus_source_c::set_center_freq( double freq, size_t chan ) ret = perseus_set_ddc_center_freq(_dev, (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), - 1); + _preselector == true ? 1:0); if ( ret == PERSEUS_NOERROR ) { _center_freq = freq; } else { @@ -453,55 +457,165 @@ double perseus_source_c::get_freq_corr( size_t chan ) std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) { - return {}; + std::vector< std::string > names; + + names += "Attenuator"; + names += "ADC preamp"; + names += "ADC dither"; + + return names; } +// +// FIXME +// osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) { - return osmosdr::gain_range_t(); + return get_gain_range( "Attenuator", chan ); } osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return osmosdr::gain_range_t( -30, 0, 10 ); + } + if ( "ADC preamp" == name ) { + return osmosdr::gain_range_t( 0, 6, 6 ); + } + if ( "ADC dither" == name ) { + return osmosdr::gain_range_t( 0, 1, 1 ); + } + return osmosdr::gain_range_t(); } -double perseus_source_c::set_gain( double gain, size_t chan ) +double perseus_source_c::set_attenuator( double gain, size_t chan ) { + int ret; + + gain = - gain; + if (_dev && _att_value != gain) { + ret = perseus_set_attenuator_in_db (_dev, gain); + + if ( PERSEUS_NOERROR == ret ) { + _att_value = gain; + } else { + std::cerr << "ERROR: perseus_set_attenuator_in_db: " << gain << std::endl; + } + } + + return _att_value; +} + +double perseus_source_c::set_adc_preamp( double gain, size_t chan ) +{ + std::cerr << "set_adc_preamp: " << gain << std::endl; + + if (_dev) { + _adc_preamp = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +double perseus_source_c::set_adc_dither( double gain, size_t chan ) { + std::cerr << "set_adc_dither: " << gain << std::endl; + + if (_dev) { + _adc_dither = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::get_gain( size_t chan ) +double perseus_source_c::get_attenuator( size_t chan ) { - return 0.0; + return _att_value; } +double perseus_source_c::get_adc_preamp(size_t chan ) +{ + double v = _adc_preamp == true ? 6. : 0.; + std::cerr << "get_adc_preamp: " << _adc_preamp << " value" << v << std::endl; + return v; +} + +double perseus_source_c::get_adc_dither(size_t chan ) +{ + double v = _adc_dither == true ? 1. : 0.; + std::cerr << "get_adc_dither: " << _adc_dither << " value" << v << std::endl; + return v; +} + + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + if ( "Attenuator" == name ) { + return set_attenuator( gain, chan ); + } + if ( "ADC preamp" == name ) { + return set_adc_preamp( gain, chan ); + } + if ( "ADC dither" == name ) { + return set_adc_dither( gain, chan ); + } + return gain; +} + + double perseus_source_c::get_gain( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return get_attenuator( chan ); + } + if ( "ADC preamp" == name ) { + return get_adc_preamp( chan ); + } + if ( "ADC dither" == name ) { + return get_adc_dither( chan ); + } return 0.0; } + + std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) { std::vector< std::string > antennas; - antennas += get_antenna( chan ); + antennas += "RX"; + antennas += "RX+PRESELECTOR"; return antennas; } std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) { + if ( antenna == "RX" ) { + _preselector = false; + set_center_freq( get_center_freq() ); + return "RX"; + } + if ( antenna == "RX+PRESELECTOR" ) { + _preselector = true; + set_center_freq( get_center_freq() ); + return "RX+PRESELECTOR"; + } return get_antenna( chan ); } std::string perseus_source_c::get_antenna( size_t chan ) { + std::cerr << "perseus_source_c::get_antenna: " << chan << std::endl; return "RX"; } diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h index 9eda23d..934ff2b 100644 --- a/lib/perseus/perseus_source_c.h +++ b/lib/perseus/perseus_source_c.h @@ -87,9 +87,20 @@ public: std::vector<std::string> get_gain_names( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); - double set_gain( double gain, size_t chan = 0 ); + + double set_gain( double gain, size_t chan = 0 ) {return gain; } + double get_gain( size_t chan = 0 ) {return _att_value; } + + double set_attenuator( double gain, size_t chan = 0 ); + double get_attenuator( size_t chan = 0 ); + + double set_adc_preamp( double gain, size_t chan = 0 ); + double get_adc_preamp( size_t chan = 0 ); + + double set_adc_dither( double gain, size_t chan = 0 ); + double get_adc_dither( size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); - double get_gain( size_t chan = 0 ); double get_gain( const std::string & name, size_t chan = 0 ); std::vector< std::string > get_antennas( size_t chan = 0 ); @@ -115,6 +126,10 @@ private: bool _frun; int _cnt; + double _att_value; + bool _adc_preamp; + bool _adc_dither; + bool _preselector; }; #endif /* INCLUDED_PERSEUS_SOURCE_C_H */ -- 1.9.1 . QUIT -- Andrea Montefusco IW0HDV ------------------------------------------ As my old boss, an Apollo veteran, would often remind us “It’s good to be smart, but it’s better to be lucky.” Wayne Hale, Space Shuttle Flight Director

1 0

[PATCH] gr-osmosdr Microtelecom Perseus HF receiver support
by andrea.montefusco＠gmail.com 02 Feb '18

02 Feb '18

1 0

[PATCH] gr-osmosdr: Microtelecom Perseus HF receiver support
by andrea montefusco 02 Feb '18

02 Feb '18

Hi maintainer and all, Below you find a patch that implements Microtelecom Perseus support in gr-osmosdr. I have tested it in gqrx SDR software. --- CMakeLists.txt | 1 + cmake/Modules/FindLibPERSEUS.cmake | 24 ++ lib/CMakeLists.txt | 8 + lib/airspy/airspy_source_c.cc | 5 +- lib/config.h.in | 1 + lib/device.cc | 8 + lib/perseus/CMakeLists.txt | 37 +++ lib/perseus/perseus_source_c.cc | 507 ++++++++++++++++++++++++++++++ +++++++ lib/perseus/perseus_source_c.h | 120 +++++++++ lib/rtl/rtl_source_c.cc | 2 +- lib/source_impl.cc | 18 +- 11 files changed, 727 insertions(+), 4 deletions(-) create mode 100644 cmake/Modules/FindLibPERSEUS.cmake create mode 100644 lib/perseus/CMakeLists.txt create mode 100644 lib/perseus/perseus_source_c.cc create mode 100644 lib/perseus/perseus_source_c.h diff --git a/CMakeLists.txt b/CMakeLists.txt index 296456d..94acd4c 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -173,6 +173,7 @@ find_package(Volk) find_package(LibbladeRF) find_package(SoapySDR NO_MODULE) find_package(LibFreeSRP) +find_package(LibPERSEUS) find_package(Doxygen) if(NOT GNURADIO_RUNTIME_FOUND) diff --git a/cmake/Modules/FindLibPERSEUS.cmake b/cmake/Modules/ FindLibPERSEUS.cmake new file mode 100644 index 0000000..5477327 --- /dev/null +++ b/cmake/Modules/FindLibPERSEUS.cmake @@ -0,0 +1,24 @@ +INCLUDE(FindPkgConfig) +PKG_CHECK_MODULES(PC_LIBPERSEUS libperseus-sdr) + +FIND_PATH( + LIBPERSEUS_INCLUDE_DIRS + NAMES perseus-sdr.h + HINTS $ENV{LIBPERSEUS_DIR}/include + ${PC_LIBPERSEUS_INCLUDEDIR} + PATHS /usr/local/include + /usr/include +) + +FIND_LIBRARY( + LIBPERSEUS_LIBRARIES + NAMES perseus-sdr + HINTS $ENV{LIBPERSEUS_DIR}/lib + ${PC_LIBPERSEUS_LIBDIR} + PATHS /usr/local/lib + /usr/lib +) + +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBPERSEUS DEFAULT_MSG LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) +MARK_AS_ADVANCED(LIBPERSEUS_LIBRARIES LIBPERSEUS_INCLUDE_DIRS) diff --git a/lib/CMakeLists.txt b/lib/CMakeLists.txt index c05b8d9..f555816 100644 --- a/lib/CMakeLists.txt +++ b/lib/CMakeLists.txt @@ -249,6 +249,14 @@ GR_INCLUDE_SUBDIRECTORY(freesrp) endif(ENABLE_FREESRP) ######################################################################## +# Setup PERSEUS component +######################################################################## +GR_REGISTER_COMPONENT("Microtelecom Perseus Receiver" ENABLE_PERSEUS LIBPERSEUS_FOUND) +if(ENABLE_PERSEUS) +GR_INCLUDE_SUBDIRECTORY(perseus) +endif(ENABLE_PERSEUS) + +######################################################################## # Setup configuration file ######################################################################## ADD_DEFINITIONS(-DHAVE_CONFIG_H=1) diff --git a/lib/airspy/airspy_source_c.cc b/lib/airspy/airspy_source_c.cc index 50150e5..02fc6ab 100644 --- a/lib/airspy/airspy_source_c.cc +++ b/lib/airspy/airspy_source_c.cc @@ -350,9 +350,10 @@ osmosdr::meta_range_t airspy_source_c::get_sample_ rates() { osmosdr::meta_range_t range; - for (size_t i = 0; i < _sample_rates.size(); i++) + for (size_t i = 0; i < _sample_rates.size(); i++) { + std::cerr << "SR: [" << i << "]: " << _sample_rates[i].first << std::endl; range += osmosdr::range_t( _sample_rates[i].first ); - + } return range; } diff --git a/lib/config.h.in b/lib/config.h.in index 42e72f1..dac7e39 100644 --- a/lib/config.h.in +++ b/lib/config.h.in @@ -19,6 +19,7 @@ #cmakedefine ENABLE_SOAPY #cmakedefine ENABLE_REDPITAYA #cmakedefine ENABLE_FREESRP +#cmakedefine ENABLE_PERSEUS //provide NAN define for MSVC older than VC12 #if defined(_MSC_VER) && (_MSC_VER < 1800) diff --git a/lib/device.cc b/lib/device.cc index 025a22b..df0d734 100644 --- a/lib/device.cc +++ b/lib/device.cc @@ -90,6 +90,10 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif + #include "arg_helpers.h" using namespace osmosdr; @@ -194,6 +198,10 @@ devices_t device::find(const device_t &hint) BOOST_FOREACH( std::string dev, soapy_source_c::get_devices() ) devices.push_back( device_t(dev) ); #endif +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + devices.push_back( device_t(dev) ); +#endif /* software-only sources should be appended at the very end, * hopefully resulting in hardware sources to be shown first diff --git a/lib/perseus/CMakeLists.txt b/lib/perseus/CMakeLists.txt new file mode 100644 index 0000000..f45a10d --- /dev/null +++ b/lib/perseus/CMakeLists.txt @@ -0,0 +1,37 @@ +# Copyright 2017 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +include_directories( + ${CMAKE_CURRENT_SOURCE_DIR} + ${LIBPERSEUS_INCLUDE_DIRS} +) + +set(perseus_srcs + ${CMAKE_CURRENT_SOURCE_DIR}/perseus_source_c.cc +) + +######################################################################## +# Append gnuradio-osmosdr library sources +######################################################################## +list(APPEND gr_osmosdr_srcs ${perseus_srcs}) +list(APPEND gr_osmosdr_libs ${LIBPERSEUS_LIBRARIES} ${GNURADIO_BLOCKS_LIBRARIES}) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_ c.cc new file mode 100644 index 0000000..0720da4 --- /dev/null +++ b/lib/perseus/perseus_source_c.cc @@ -0,0 +1,507 @@ +/* -*- c++ -*- */ +/* + * Copyright 2018 Andrea Montefusco IW0HDV + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * config.h is generated by configure. It contains the results + * of probing for features, options etc. It should be the first + * file included in your .cc file. + */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <stdexcept> +#include <iostream> +#include <algorithm> + +#include <boost/assign.hpp> +#include <boost/format.hpp> +#include <boost/detail/endian.hpp> +#include <boost/algorithm/string.hpp> +#include <boost/thread/thread.hpp> + +#include <gnuradio/io_signature.h> + +#include "perseus_source_c.h" +#include "arg_helpers.h" + + + +using namespace boost::assign; + +#define PERSEUS_FORMAT_ERROR(ret, msg) \ + boost::str( boost::format(msg " (%1%)") % ret ) + +#define PERSEUS_THROW_ON_ERROR(ret, msg) \ + if ( ret != PERSEUS_NOERROR ) \ + { \ + throw std::runtime_error( PERSEUS_FORMAT_ERROR(ret, msg) ); \ + } + +#define PERSEUS_FUNC_STR(func, arg) \ + boost::str(boost::format(func "(%1%)") % arg) + " has failed" + +perseus_source_c_sptr make_perseus_source_c (const std::string & args) +{ + return gnuradio::get_initial_sptr(new perseus_source_c (args)); +} + +/* + * Specify constraints on number of input and output streams. + * This info is used to construct the input and output signatures + * (2nd & 3rd args to gr::block's constructor). The input and + * output signatures are used by the runtime system to + * check that a valid number and type of inputs and outputs + * are connected to this block. In this case, we accept + * only 0 input and 1 output. + */ +static const int MIN_IN = 0; // mininum number of input streams +static const int MAX_IN = 0; // maximum number of input streams +static const int MIN_OUT = 1; // minimum number of output streams +static const int MAX_OUT = 1; // maximum number of output streams + +/* + * The private constructor + */ +perseus_source_c::perseus_source_c (const std::string &args) + : gr::sync_block ("perseus_source_c", + gr::io_signature::make(MIN_IN, MAX_IN, sizeof (gr_complex)), + gr::io_signature::make(MIN_OUT, MAX_OUT, sizeof (gr_complex))), + _dev(NULL), + _sample_rate(0), + _center_freq(0), + _freq_corr(0), + _frun(false), + _cnt(0) +{ + //int ret; + + dict_t dict = params_to_dict(args); + + _dev = NULL; + + // Set debug info dumped to stderr to the maximum verbose level + perseus_set_debug(3); + + //fprintf (stderr, "Revision: %s\n", git_revision); + //fprintf (stderr, "SAMPLE RATE: %d\n", sr); + //fprintf (stderr, "NBUF: %d BUF SIZE: %d TOTAL BUFFER LENGTH: %d\n", nb, bs, nb*bs); + + // Check how many Perseus receivers are connected to the system + int num_perseus = perseus_init(); + std::cerr << "## Microtelecom Perseus ctor: " << num_perseus << " Perseus receivers found." << std::endl; + + if (num_perseus==0) { + perseus_exit(); + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "No Perseus receivers detected"); + } + // Open the first one... + if ((_dev = perseus_open(0)) == NULL) { + PERSEUS_THROW_ON_ERROR(PERSEUS_DEVNOTFOUND, "Unable to open Perseus device"); + } + // Download the standard firmware to the unit + std::cerr << "Downloading firmware..." << std::endl; + if (int rc = perseus_firmware_download(_dev,NULL)<0) { + PERSEUS_THROW_ON_ERROR (rc, "firmware download error"); + } + + // Dump some information about the receiver (S/N and HW rev) + int flag; + perseus_is_preserie(_dev, &flag); + if (flag != 0) + fprintf(stderr, "The device is a preserie unit"); + else { + eeprom_prodid prodid; + if (perseus_get_product_id(_dev,&prodid)<0) + fprintf(stderr, "get product id error: %s", perseus_errorstr()); + else + fprintf(stderr, "Receiver S/N: %05d-%02hX%02hX-%02hX%02hX-%02hX%02hX - HW Release:%hd.%hd\n", + (uint16_t) prodid.sn, + (uint16_t) prodid.signature[5], + (uint16_t) prodid.signature[4], + (uint16_t) prodid.signature[3], + (uint16_t) prodid.signature[2], + (uint16_t) prodid.signature[1], + (uint16_t) prodid.signature[0], + (uint16_t) prodid.hwrel, + (uint16_t) prodid.hwver); + } + // Printing all sampling rates available ..... + { + int buf[BUFSIZ]; + + if (perseus_get_sampling_rates (_dev, buf, sizeof(buf)/sizeof(buf[0])) < 0) { + fprintf(stderr, "get sampling rates error: %s\n", perseus_errorstr()); + } else { + int i = 0; + while (buf[i]) { + fprintf(stderr, "#%d: sample rate: %d\n", i, buf[i]); + + _sample_rates.push_back( std::pair<double, uint32_t>( buf[i], i ) ); + i++; + } + /* since they may (and will) give us an unsorted array we have to sort it here + * to play nice with the monotonic requirement of meta-range later on */ + std::sort(_sample_rates.begin(), _sample_rates.end()); + + for (size_t i = 0; i < _sample_rates.size(); i++) + std::cerr << boost::format("%gM ") % (_sample_rates[i].first / 1e6); + + std::cerr << std::endl; + } + } + // Configure the receiver for 2 MS/s operations + fprintf(stderr, "Configuring FPGA...\n"); + if (int ret = perseus_set_sampling_rate(_dev, 96000) < 0) { // specify the sampling rate value in Samples/second + std::cerr << "fpga configuration error: " << perseus_errorstr() << std::endl; + PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); + } + + perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + // Enable ADC Dither, Disable ADC Preamp + perseus_set_adc(_dev, true, false); + // set the NCO frequency in the middle of the range allowed + set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); + set_sample_rate( get_sample_rates().start() ); + + _fifo = new boost::circular_buffer<gr_complex>(5000000); + if (!_fifo) { + throw std::runtime_error( std::string(__FUNCTION__) + " " + + "Failed to allocate a sample FIFO!" ); + } +} + +/* + * Our virtual destructor. + */ +perseus_source_c::~perseus_source_c () +{ + if (_dev) { + if (_frun) stop(); + int ret = perseus_close(_dev); + if ( ret != PERSEUS_NOERROR ) { + std::cerr << PERSEUS_FORMAT_ERROR(ret, "Failed to close Perseus") << std::endl; + } else + _dev = NULL; + } + perseus_exit(); + + if (_fifo) { + delete _fifo; + _fifo = NULL; + } +} + + +typedef union { + struct { + int32_t i; + int32_t q; + } __attribute__((__packed__)) iq; + struct { + uint8_t i1; + uint8_t i2; + uint8_t i3; + uint8_t i4; + uint8_t q1; + uint8_t q2; + uint8_t q3; + uint8_t q4; + } __attribute__((__packed__)) ; +} iq_sample; + + +int perseus_source_c::perseus_rx_callback(void *buf, int buf_size) +{ + size_t i, n_avail, to_copy, num_samples; + + uint8_t *samplebuf = (uint8_t*)buf; + + num_samples = buf_size/6; + + if (buf_size % 6) + std::cerr << "FATAL !!!!!!! not on boundary" << std::endl; + + iq_sample s; + + _fifo_lock.lock(); + + n_avail = _fifo->capacity() - _fifo->size(); + to_copy = (n_avail < num_samples ? n_avail : num_samples); + + for (i = 0; i < to_copy; i++ ) { + + s.i1 = s.q1 = 0; + s.i2 = *samplebuf++; + s.i3 = *samplebuf++; + s.i4 = *samplebuf++; + s.q2 = *samplebuf++; + s.q3 = *samplebuf++; + s.q4 = *samplebuf++; + + // convert 24 bit two's complements integers to float in [-1.0 - +1.0] range + + /* Push sample to the fifo */ + _fifo->push_back( gr_complex( (float)(s.iq.i) / (INT_MAX - 256), (float)(s.iq.q) / (INT_MAX - 256) ) ); + + } + // keep a counter of processed bytes + _cnt += buf_size; + + _fifo_lock.unlock(); + + /* We have made some new samples available to the consumer in work() */ + if (to_copy) { + //std::cerr << "+" << std::flush; + _samp_avail.notify_one(); + } + + /* Indicate overrun, if necessary */ + if (to_copy < num_samples) + std::cerr << "O" << std::flush; + + return 0; // TODO: return -1 on error/stop +} + +// static method used as callback from the libperseus-sdr library +int perseus_source_c::_perseus_rx_callback(void *buf, int buf_size, void *extra) +{ + perseus_source_c *obj = (perseus_source_c *)extra; + + return obj->perseus_rx_callback((float *)buf, buf_size); + + return 0; +} + + +bool perseus_source_c::start() +{ + int ret; + + if ( ! _dev ) + return false; + + std::cerr << "***** START COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + _frun = true; + + // in order to guarantee samples stream synchronization + // re-set the sample rate each time the stream is started + set_sample_rate( get_sample_rate() ); + + ret = perseus_start_async_input(_dev, + 6 * 1024 * 2 /* buffer size */, + perseus_source_c::_perseus_rx_callback, + (void *)this); + if (ret != PERSEUS_NOERROR) { + std::cerr << "Failed to start RX streaming (" + << ret << ")" << std::endl; + return false; + } else + return true; +} + +bool perseus_source_c::stop() +{ + if ( ! _dev ) + return false; + + _frun = false; + + std::cerr << "***** STOP COUNTER: " << _cnt + << " mod 6 " << (_cnt % 6) << std::endl; + + int ret = perseus_stop_async_input(_dev); + + if ( ret != PERSEUS_NOERROR ) { + std::cerr << "Failed to stop RX streaming (" << ret << ")" << std::endl; + return false; + } else + return true; +} + +int perseus_source_c::work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ) +{ + gr_complex *out = (gr_complex *)output_items[0]; + + if ( _frun == false ) return WORK_DONE; + + boost::unique_lock<boost::mutex> lock(_fifo_lock); + + /* Wait until we have the requested number of samples */ + int n_samples_avail = _fifo->size(); + + while (n_samples_avail < noutput_items) { + _samp_avail.wait(lock); + n_samples_avail = _fifo->size(); + } + + for(int i = 0; i < noutput_items; ++i) { + out[i] = _fifo->at(0); + _fifo->pop_front(); + } + + return noutput_items; +} + +std::vector<std::string> perseus_source_c::get_devices() +{ + std::vector<std::string> devices; + std::string label; + + std::string args = "perseus=0,label='Perseus'"; + devices.push_back( args ); + + return devices; +} + +size_t perseus_source_c::get_num_channels() +{ + return 1; +} + +osmosdr::meta_range_t perseus_source_c::get_sample_rates() +{ + osmosdr::meta_range_t range; + + for (size_t i = 0; i < _sample_rates.size(); i++) { + range += osmosdr::range_t( _sample_rates[i].first ); + std::cerr << "SR: " << i << " : (" + << _sample_rates[i].first << ")" << std::endl; + } + return range; +} + +double perseus_source_c::set_sample_rate( double rate ) +{ + int ret; + if ((ret = perseus_set_sampling_rate(_dev, rate)) < 0) { + PERSEUS_THROW_ON_ERROR(ret, "Unable to set sample rate."); + } else + _sample_rate = rate; + + return get_sample_rate(); +} + +double perseus_source_c::get_sample_rate() +{ + return _sample_rate; +} + +osmosdr::freq_range_t perseus_source_c::get_freq_range( size_t chan ) +{ + osmosdr::freq_range_t range; + + range += osmosdr::range_t( PERSEUS_DDC_FREQ_MIN, PERSEUS_DDC_FREQ_MAX ); + + return range; +} + +double perseus_source_c::set_center_freq( double freq, size_t chan ) +{ + int ret; + + if (_dev) { + ret = + perseus_set_ddc_center_freq(_dev, + (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), + 1); + if ( ret == PERSEUS_NOERROR ) { + _center_freq = freq; + } else { + PERSEUS_THROW_ON_ERROR( ret, PERSEUS_FUNC_STR( "perseus_set_ddc_center_freq", freq ) ) + } + } + + return get_center_freq( chan ); +} + +double perseus_source_c::get_center_freq( size_t chan ) +{ + return _center_freq; +} + +double perseus_source_c::set_freq_corr( double ppm, size_t chan ) +{ + return _freq_corr = ppm; +} + +double perseus_source_c::get_freq_corr( size_t chan ) +{ + return _freq_corr; +} + +std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) +{ + return {}; +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) +{ + return osmosdr::gain_range_t(); +} + +osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) +{ + return osmosdr::gain_range_t(); +} + + +double perseus_source_c::set_gain( double gain, size_t chan ) +{ + return gain; +} + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + return gain; +} + +double perseus_source_c::get_gain( size_t chan ) +{ + return 0.0; +} + +double perseus_source_c::get_gain( const std::string & name, size_t chan ) +{ + return 0.0; +} + +std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) +{ + std::vector< std::string > antennas; + + antennas += get_antenna( chan ); + + return antennas; +} + +std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) +{ + return get_antenna( chan ); +} + +std::string perseus_source_c::get_antenna( size_t chan ) +{ + return "RX"; +} diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h new file mode 100644 index 0000000..9eda23d --- /dev/null +++ b/lib/perseus/perseus_source_c.h @@ -0,0 +1,120 @@ +/* -*- c++ -*- */ +/* + * Copyright 2013 Dimitri Stolnikov <horiz0n(a)gmx.net> + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_PERSEUS_SOURCE_C_H +#define INCLUDED_PERSEUS_SOURCE_C_H + +#include <boost/circular_buffer.hpp> +#include <boost/thread/mutex.hpp> +#include <boost/thread/condition_variable.hpp> + +#include <gnuradio/sync_block.h> + +#include "source_iface.h" +#include <perseus-sdr.h> + +class perseus_source_c; + +typedef boost::shared_ptr<perseus_source_c> perseus_source_c_sptr; + +/*! + * \brief Return a shared_ptr to a new instance of perseus_source_c. + * + * To avoid accidental use of raw pointers, perseus_source_c's + * constructor is private. make_perseus_source_c is the public + * interface for creating new instances. + */ +perseus_source_c_sptr make_perseus_source_c (const std::string & args = ""); + +/*! + * \brief Provides a stream of complex samples. + * \ingroup block + */ +class perseus_source_c : + public gr::sync_block, + public source_iface +{ +private: + // The friend declaration allows make_perseus_source_c to + // access the private constructor. + + friend perseus_source_c_sptr make_perseus_source_c (const std::string & args); + + perseus_source_c (const std::string & args); + +public: + ~perseus_source_c (); + + bool start(); + bool stop(); + + int work( int noutput_items, + gr_vector_const_void_star &input_items, + gr_vector_void_star &output_items ); + + static std::vector< std::string > get_devices(); + + size_t get_num_channels( void ); + + osmosdr::meta_range_t get_sample_rates( void ); + double set_sample_rate( double rate ); + double get_sample_rate( void ); + + osmosdr::freq_range_t get_freq_range( size_t chan = 0 ); + double set_center_freq( double freq, size_t chan = 0 ); + double get_center_freq( size_t chan = 0 ); + double set_freq_corr( double ppm, size_t chan = 0 ); + double get_freq_corr( size_t chan = 0 ); + + std::vector<std::string> get_gain_names( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); + osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); + double set_gain( double gain, size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); + double get_gain( size_t chan = 0 ); + double get_gain( const std::string & name, size_t chan = 0 ); + + std::vector< std::string > get_antennas( size_t chan = 0 ); + std::string set_antenna( const std::string & antenna, size_t chan = 0 ); + std::string get_antenna( size_t chan = 0 ); + + +private: + static int _perseus_rx_callback(void *buf, int buf_size, void *extra); + + int perseus_rx_callback(void *samples, int sample_count); + + perseus_descr *_dev; + + boost::circular_buffer<gr_complex> *_fifo; + boost::mutex _fifo_lock; + boost::condition_variable _samp_avail; + + std::vector< std::pair<double, uint32_t> > _sample_rates; + double _sample_rate; + double _center_freq; + double _freq_corr; + + bool _frun; + int _cnt; +}; + +#endif /* INCLUDED_PERSEUS_SOURCE_C_H */ diff --git a/lib/rtl/rtl_source_c.cc b/lib/rtl/rtl_source_c.cc index a371464..eb7042e 100644 --- a/lib/rtl/rtl_source_c.cc +++ b/lib/rtl/rtl_source_c.cc @@ -221,7 +221,7 @@ rtl_source_c::rtl_source_c (const std::string &args) throw std::runtime_error("Failed to enable offset tuning."); } - ret = rtlsdr_set_bias_tee(_dev, bias_tee); +// ret = rtlsdr_set_bias_tee(_dev, bias_tee); if (ret < 0) throw std::runtime_error("Failed to set bias tee."); diff --git a/lib/source_impl.cc b/lib/source_impl.cc index a28f314..ead4ef7 100644 --- a/lib/source_impl.cc +++ b/lib/source_impl.cc @@ -92,6 +92,9 @@ #include <freesrp_source_c.h> #endif +#ifdef ENABLE_PERSEUS +#include <perseus_source_c.h> +#endif #include "arg_helpers.h" #include "source_impl.h" @@ -171,6 +174,9 @@ source_impl::source_impl( const std::string &args ) #ifdef ENABLE_FREESRP dev_types.push_back("freesrp"); #endif +#ifdef ENABLE_PERSEUS + dev_types.push_back("perseus"); +#endif std::cerr << "gr-osmosdr " << GR_OSMOSDR_VERSION << " (" << GR_OSMOSDR_LIBVER << ") " << "gnuradio " << gr::version() << std::endl; @@ -252,7 +258,10 @@ source_impl::source_impl( const std::string &args ) BOOST_FOREACH( std::string dev, freesrp_source_c::get_devices() ) dev_list.push_back( dev ); #endif - +#ifdef ENABLE_PERSEUS + BOOST_FOREACH( std::string dev, perseus_source_c::get_devices() ) + dev_list.push_back( dev ); +#endif // std::cerr << std::endl; // BOOST_FOREACH( std::string dev, dev_list ) // std::cerr << "'" << dev << "'" << std::endl; @@ -383,6 +392,13 @@ source_impl::source_impl( const std::string &args ) } #endif +#ifdef ENABLE_PERSEUS + if ( dict.count("perseus") ) { + perseus_source_c_sptr src = make_perseus_source_c( arg ); + block = src; iface = src.get(); + } +#endif + if ( iface != NULL && long(block.get()) != 0 ) { _devs.push_back( iface ); -- 1.9.1 >From 1b6cf50a7a6074754717b0270757931c379561bc Mon Sep 17 00:00:00 2001 From: Andrea Montefusco IW0HDV <andrew(a)montefusco.com> Date: Thu, 1 Feb 2018 17:33:39 +0100 Subject: More hardware controls added (attenuator, ADC preamp and dither, preselector) --- lib/perseus/perseus_source_c.cc | 136 ++++++++++++++++++++++++++++++ ++++++---- lib/perseus/perseus_source_c.h | 19 +++++- 2 files changed, 142 insertions(+), 13 deletions(-) diff --git a/lib/perseus/perseus_source_c.cc b/lib/perseus/perseus_source_ c.cc index 0720da4..89674b1 100644 --- a/lib/perseus/perseus_source_c.cc +++ b/lib/perseus/perseus_source_c.cc @@ -89,7 +89,11 @@ perseus_source_c::perseus_source_c (const std::string &args) _center_freq(0), _freq_corr(0), _frun(false), - _cnt(0) + _cnt(0), + _att_value(0), + _adc_preamp(false), + _adc_dither(false), + _preselector(false) { //int ret; @@ -174,9 +178,9 @@ perseus_source_c::perseus_source_c (const std::string &args) PERSEUS_THROW_ON_ERROR(ret, "Perseus fpga configuration error"); } - perseus_set_attenuator_in_db(_dev, PERSEUS_ATT_0DB); + perseus_set_attenuator_in_db(_dev, _att_value); // Enable ADC Dither, Disable ADC Preamp - perseus_set_adc(_dev, true, false); + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); // set the NCO frequency in the middle of the range allowed set_center_freq( (get_freq_range().start() + get_freq_range().stop()) / 2.0 ); set_sample_rate( get_sample_rates().start() ); @@ -425,7 +429,7 @@ double perseus_source_c::set_center_freq( double freq, size_t chan ) ret = perseus_set_ddc_center_freq(_dev, (uint64_t)(freq * (1.0 + (_freq_corr * 10e-6))), - 1); + _preselector == true ? 1:0); if ( ret == PERSEUS_NOERROR ) { _center_freq = freq; } else { @@ -453,55 +457,165 @@ double perseus_source_c::get_freq_corr( size_t chan ) std::vector<std::string> perseus_source_c::get_gain_names( size_t chan ) { - return {}; + std::vector< std::string > names; + + names += "Attenuator"; + names += "ADC preamp"; + names += "ADC dither"; + + return names; } +// +// FIXME +// osmosdr::gain_range_t perseus_source_c::get_gain_range( size_t chan ) { - return osmosdr::gain_range_t(); + return get_gain_range( "Attenuator", chan ); } osmosdr::gain_range_t perseus_source_c::get_gain_range( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return osmosdr::gain_range_t( -30, 0, 10 ); + } + if ( "ADC preamp" == name ) { + return osmosdr::gain_range_t( 0, 6, 6 ); + } + if ( "ADC dither" == name ) { + return osmosdr::gain_range_t( 0, 1, 1 ); + } + return osmosdr::gain_range_t(); } -double perseus_source_c::set_gain( double gain, size_t chan ) +double perseus_source_c::set_attenuator( double gain, size_t chan ) { + int ret; + + gain = - gain; + if (_dev && _att_value != gain) { + ret = perseus_set_attenuator_in_db (_dev, gain); + + if ( PERSEUS_NOERROR == ret ) { + _att_value = gain; + } else { + std::cerr << "ERROR: perseus_set_attenuator_in_db: " << gain << std::endl; + } + } + + return _att_value; +} + +double perseus_source_c::set_adc_preamp( double gain, size_t chan ) +{ + std::cerr << "set_adc_preamp: " << gain << std::endl; + + if (_dev) { + _adc_preamp = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +double perseus_source_c::set_adc_dither( double gain, size_t chan ) { + std::cerr << "set_adc_dither: " << gain << std::endl; + + if (_dev) { + _adc_dither = (gain != 0. ? true : false); + int ret = + perseus_set_adc(_dev, _adc_dither == true ? 1:0, _adc_preamp == true ? 1:0); + if ( PERSEUS_NOERROR != ret ) { + std::cerr << "ERROR: perseus_set_adc" << ret << std::endl; + } + } return gain; } -double perseus_source_c::get_gain( size_t chan ) +double perseus_source_c::get_attenuator( size_t chan ) { - return 0.0; + return _att_value; } +double perseus_source_c::get_adc_preamp(size_t chan ) +{ + double v = _adc_preamp == true ? 6. : 0.; + std::cerr << "get_adc_preamp: " << _adc_preamp << " value" << v << std::endl; + return v; +} + +double perseus_source_c::get_adc_dither(size_t chan ) +{ + double v = _adc_dither == true ? 1. : 0.; + std::cerr << "get_adc_dither: " << _adc_dither << " value" << v << std::endl; + return v; +} + + +double perseus_source_c::set_gain( double gain, const std::string & name, size_t chan) +{ + if ( "Attenuator" == name ) { + return set_attenuator( gain, chan ); + } + if ( "ADC preamp" == name ) { + return set_adc_preamp( gain, chan ); + } + if ( "ADC dither" == name ) { + return set_adc_dither( gain, chan ); + } + return gain; +} + + double perseus_source_c::get_gain( const std::string & name, size_t chan ) { + if ( "Attenuator" == name ) { + return get_attenuator( chan ); + } + if ( "ADC preamp" == name ) { + return get_adc_preamp( chan ); + } + if ( "ADC dither" == name ) { + return get_adc_dither( chan ); + } return 0.0; } + + std::vector< std::string > perseus_source_c::get_antennas( size_t chan ) { std::vector< std::string > antennas; - antennas += get_antenna( chan ); + antennas += "RX"; + antennas += "RX+PRESELECTOR"; return antennas; } std::string perseus_source_c::set_antenna( const std::string & antenna, size_t chan ) { + if ( antenna == "RX" ) { + _preselector = false; + set_center_freq( get_center_freq() ); + return "RX"; + } + if ( antenna == "RX+PRESELECTOR" ) { + _preselector = true; + set_center_freq( get_center_freq() ); + return "RX+PRESELECTOR"; + } return get_antenna( chan ); } std::string perseus_source_c::get_antenna( size_t chan ) { + std::cerr << "perseus_source_c::get_antenna: " << chan << std::endl; return "RX"; } diff --git a/lib/perseus/perseus_source_c.h b/lib/perseus/perseus_source_c.h index 9eda23d..934ff2b 100644 --- a/lib/perseus/perseus_source_c.h +++ b/lib/perseus/perseus_source_c.h @@ -87,9 +87,20 @@ public: std::vector<std::string> get_gain_names( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( size_t chan = 0 ); osmosdr::gain_range_t get_gain_range( const std::string & name, size_t chan = 0 ); - double set_gain( double gain, size_t chan = 0 ); + + double set_gain( double gain, size_t chan = 0 ) {return gain; } + double get_gain( size_t chan = 0 ) {return _att_value; } + + double set_attenuator( double gain, size_t chan = 0 ); + double get_attenuator( size_t chan = 0 ); + + double set_adc_preamp( double gain, size_t chan = 0 ); + double get_adc_preamp( size_t chan = 0 ); + + double set_adc_dither( double gain, size_t chan = 0 ); + double get_adc_dither( size_t chan = 0 ); + double set_gain( double gain, const std::string & name, size_t chan = 0 ); - double get_gain( size_t chan = 0 ); double get_gain( const std::string & name, size_t chan = 0 ); std::vector< std::string > get_antennas( size_t chan = 0 ); @@ -115,6 +126,10 @@ private: bool _frun; int _cnt; + double _att_value; + bool _adc_preamp; + bool _adc_dither; + bool _preselector; }; #endif /* INCLUDED_PERSEUS_SOURCE_C_H */ -- 1.9.1 -- Andrea Montefusco IW0HDV ------------------------------------------ As my old boss, an Apollo veteran, would often remind us “It’s good to be smart, but it’s better to be lucky.” Wayne Hale, Space Shuttle Flight Director

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-sdr February 2018