11 May
2009
11 May
'09
3:01 p.m.
Hi,
I followed Debian_Getting_Started chapter in the wiki. There wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
I tried first to delete "hfcmulti.dslot=1" at the kernel line but still have
the second line.
After checking the /boot/grub/menu.lst file, I saw that the line initdr was
missing for the kernel 2.6.27.4:
title 2.6.27.4
root
kernel
title 2.6.26.2
root
kernel
initdr
In /boot directory, I have initdr files only for 2.6.26.2 and 2.6.26.1.
Sorry I am quite weak concerning the kernel.
Can anyone help me?
Thanks a lot
Eric Cathelinaud
11 May
11 May
5:26 p.m.
Eric Cathelinaud wrote:
[...] In /boot directory, I have initdr files only for
2.6.26.2 and
2.6.26.1.
Sorry I am quite weak concerning the kernel. Can anyone help me?
Then just use mkinitramfs-kpkg to build a new initrd for your build.
ex: $ mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
title Debian GNU/Linux, kernel X
root (hd0,0)
kernel /vmlinuz-X
initrd /initrd.img-X
and so on...
kenny_
12 May
12 May
12:29 a.m.
Hi,
that should fix it ;)
If anything is wrong in the tutorial tell me please.
For me everything worked on both etch and lenny.
I used standard netinstall...
Björn
Am 11.05.2009 um 17:26 schrieb Marcel Klein:
Eric Cathelinaud wrote:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
[...] In /boot directory, I have initdr files
only for 2.6.26.2 and
2.6.26.1.
Sorry I am quite weak concerning the kernel. Can anyone help me?
Then just use mkinitramfs-kpkg to build a new initrd for your build.
ex: $ mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
title Debian GNU/Linux, kernel X
root (hd0,0)
kernel /vmlinuz-X
initrd /initrd.img-X
and so on...
kenny_
3:28 p.m.
Hi,
Thanks for your help.
I tried your command:
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
An error occured:
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/sbin/'
I really don't know how to solve the problem.
Then I tried to use the image of the previous kernel 2.6.26.2 to launch
2.6.27.4. There is no more Kernel panic but an error saying the lib/modules/
2.6.27.4/ directory doesn't exist. I don't understand this error at all
cause I checked and this directory actually exists.
Eric
2009/5/12 Bjoern Heller <mailinglists(a)hellercom.de>
Hi,
that should fix it ;)
If anything is wrong in the tutorial tell me please.
For me everything worked on both etch and lenny.
I used standard netinstall...
Björn
Am 11.05.2009 um 17:26 schrieb Marcel Klein:
Eric Cathelinaud wrote:
[...] In /boot directory, I have initdr files only for 2.6.26.2 and
2.6.26.1.
Sorry I am quite weak concerning the kernel. Can anyone help me?
Then just use mkinitramfs-kpkg to build a new initrd for your build.
ex: $ mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
title Debian GNU/Linux, kernel X
root (hd0,0)
kernel /vmlinuz-X
initrd /initrd.img-X
and so on...
kenny_
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
6:28 p.m.
Hi Eric,
Eric Cathelinaud wrote:
Hi,
I followed Debian_Getting_Started chapter in the wiki. There wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Have you forgotten to add SATA support to the kernel and renaming the
hardisk to sda (fstab)?
Best Regards,
Holger
13 May
13 May
10:50 a.m.
Hi Holger,
I have got an IDE hard desk, not SATA.
I think it's coming from the initrd missing. I don't understand why there is
an error when launching the command:
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
The error is :
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/sbin/'
I tried to do 'update-initramfs -u -k all' but still have the same problem:
cp: operand of the target file missing after
`/tmp/tmp.XXXX<something>/sbin/'
The software is using cp for some reason but something is missing and I
don't know what.
I installed mkinitramfs and libbash (needed by mkinitramfs). Did I miss
something?
Best regards,
Eric
2009/5/12 Holger Adams <holger(a)kernreaktor.org>
Hi Eric,
Eric Cathelinaud wrote:
Hi,
I followed Debian_Getting_Started chapter in the wiki. There wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Have you forgotten to add SATA support to the kernel and renaming the
hardisk to sda (fstab)?
Best Regards,
Holger
3:28 p.m.
Hi,
Finally i used yaird instead of mkinitramfs to build the image and it works
fine:
apt-get install yaird
yaird –v –o /boot/initrd.img-2.6.27.4 2.6.27.4
*if yaird return an error saying /lib/modules/2.6.27.4/modules.pcimap is
missing:
depmod -a -m -F /boot/System.map-2.6.27.4 2.6.27.4
dpkg --configure -a
Now I can boot on kernel 2.6.27.4
Thanks a lot for the help
I still have a problem with *hfcmulti.dslot=1*
After reboot it says that it is not recognized and is ignored.
My /boot/grub/menu.lst is as follow:
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro
quiet
initrd /boot/initrd.img-2.6.27.4
and during the *make-kpkg linux-image --initrd --revision=openbsc01.0*, I
saw these lines:
CC [M] drivers/isdn/hardware/mISDN/hfcpci.o
CC [M] drivers/isdn/hardware/mISDN/hfcmulti.o
...
Did I miss something?
Best regards,
Eric
2009/5/13 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
Hi Holger,
I have got an IDE hard desk, not SATA.
I think it's coming from the initrd missing. I don't understand why there
is an error when launching the command:
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
The error is :
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/sbin/'
I tried to do 'update-initramfs -u -k all' but still have the same problem:
cp: operand of the target file missing after
`/tmp/tmp.XXXX<something>/sbin/'
The software is using cp for some reason but something is missing and I
don't know what.
I installed mkinitramfs and libbash (needed by mkinitramfs). Did I miss
something?
Best regards,
Eric
2009/5/12 Holger Adams <holger(a)kernreaktor.org>
Hi Eric,
Eric Cathelinaud wrote:
Hi,
I followed Debian_Getting_Started chapter in the wiki. There wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Have you forgotten to add SATA support to the kernel and renaming the
hardisk to sda (fstab)?
Best Regards,
Holger
11:19 p.m.
Hello,
Have you really selected the HFC e1 driver in menuconfig??
You need to install it with a asterisk, to work immediately.
And dont forget to include the whole misdn stuff...
I tried it again on a fresh installed machine, and it worked fine.
Best regards
Björn Heller
Am 13.05.2009 um 15:28 schrieb Eric Cathelinaud:
Hi,
Finally i used yaird instead of mkinitramfs to build the image and
it works fine:
apt-get install yaird
yaird –v –o /boot/initrd.img-2.6.27.4 2.6.27.4
*if yaird return an error saying /lib/modules/2.6.27.4/
modules.pcimap is missing:
depmod -a -m -F /boot/System.map-2.6.27.4 2.6.27.4
dpkg --configure -a
Now I can boot on kernel 2.6.27.4
Thanks a lot for the help
I still have a problem with hfcmulti.dslot=1
After reboot it says that it is not recognized and is ignored.
My /boot/grub/menu.lst is as follow:
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1
hfcmulti.dslot=1 ro quiet
initrd /boot/initrd.img-2.6.27.4
and during the make-kpkg linux-image --initrd --
revision=openbsc01.0, I saw these lines:
CC [M] drivers/isdn/hardware/mISDN/hfcpci.o
CC [M] drivers/isdn/hardware/mISDN/hfcmulti.o
...
Did I miss something?
Best regards,
Eric
2009/5/13 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
Hi Holger,
I have got an IDE hard desk, not SATA.
I think it's coming from the initrd missing. I don't understand why
there is an error when launching the command:
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
The error is :
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/
sbin/'
I tried to do 'update-initramfs -u -k all' but still have the same
problem:
cp: operand of the target file missing after `/tmp/
tmp.XXXX<something>/sbin/'
The software is using cp for some reason but something is missing
and I don't know what.
I installed mkinitramfs and libbash (needed by mkinitramfs). Did I
miss something?
Best regards,
Eric
2009/5/12 Holger Adams <holger(a)kernreaktor.org>
Hi Eric,
Eric Cathelinaud wrote:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
Hi,
I followed Debian_Getting_Started chapter in the wiki. There
wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet
hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root
fs on
unknown-block(0,0)
Have you forgotten to add SATA support to the kernel and renaming the
hardisk to sda (fstab)?
Best Regards,
Holger
14 May
14 May
12:06 p.m.
Hello,
Thanks, it works now. I was using only 'M' for module. I replaced by
asterisk and it works fine.
Best regards
Eric Cathelinaud
2009/5/13 Bjoern Heller <mailinglists(a)hellercom.de>
Hello,
Have you really selected the HFC e1 driver in menuconfig??
You need to install it with a asterisk, to work immediately.
And dont forget to include the whole misdn stuff...
I tried it again on a fresh installed machine, and it worked fine.
Best regards
Björn Heller
Am 13.05.2009 um 15:28 schrieb Eric Cathelinaud:
Hi,
Finally i used yaird instead of mkinitramfs to build the image and it works
fine:
apt-get install yaird
yaird –v –o /boot/initrd.img-2.6.27.4 2.6.27.4
*if yaird return an error saying /lib/modules/2.6.27.4/modules.pcimap is
missing:
depmod -a -m -F /boot/System.map-2.6.27.4 2.6.27.4
dpkg --configure -a
Now I can boot on kernel 2.6.27.4
Thanks a lot for the help
I still have a problem with *hfcmulti.dslot=1*
After reboot it says that it is not recognized and is ignored.
My /boot/grub/menu.lst is as follow:
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro
quiet
initrd /boot/initrd.img-2.6.27.4
and during the *make-kpkg linux-image --initrd --revision=openbsc01.0*, I
saw these lines:
CC [M] drivers/isdn/hardware/mISDN/hfcpci.o
CC [M] drivers/isdn/hardware/mISDN/hfcmulti.o
...
Did I miss something?
Best regards,
Eric
2009/5/13 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
Hi Holger,
I have got an IDE hard desk, not SATA.
I think it's coming from the initrd missing. I don't understand why there
is an error when launching the command:
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
The error is :
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/sbin/'
I tried to do 'update-initramfs -u -k all' but still have the same
problem:
cp: operand of the target file missing after
`/tmp/tmp.XXXX<something>/sbin/'
The software is using cp for some reason but something is missing and I
don't know what.
I installed mkinitramfs and libbash (needed by mkinitramfs). Did I miss
something?
Best regards,
Eric
2009/5/12 Holger Adams <holger(a)kernreaktor.org>
Hi Eric,
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
Eric Cathelinaud wrote:
Hi,
I followed Debian_Getting_Started chapter in the wiki. There wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Have you forgotten to add SATA support to the kernel and renaming the
hardisk to sda (fstab)?
Best Regards,
Holger
5482
days inactive
5485
days old
8 comments
4 participants
participants (4)
-
Bjoern Heller -
Eric Cathelinaud -
Holger Adams -
Marcel Klein