14 May
2009
14 May
'09
12:06 p.m.
Hello,
Thanks, it works now. I was using only 'M' for module. I replaced by
asterisk and it works fine.
Best regards
Eric Cathelinaud
2009/5/13 Bjoern Heller <mailinglists(a)hellercom.de>
Hello,
Have you really selected the HFC e1 driver in menuconfig??
You need to install it with a asterisk, to work immediately.
And dont forget to include the whole misdn stuff...
I tried it again on a fresh installed machine, and it worked fine.
Best regards
Björn Heller
Am 13.05.2009 um 15:28 schrieb Eric Cathelinaud:
Hi,
Finally i used yaird instead of mkinitramfs to build the image and it works
fine:
apt-get install yaird
yaird –v –o /boot/initrd.img-2.6.27.4 2.6.27.4
*if yaird return an error saying /lib/modules/2.6.27.4/modules.pcimap is
missing:
depmod -a -m -F /boot/System.map-2.6.27.4 2.6.27.4
dpkg --configure -a
Now I can boot on kernel 2.6.27.4
Thanks a lot for the help
I still have a problem with *hfcmulti.dslot=1*
After reboot it says that it is not recognized and is ignored.
My /boot/grub/menu.lst is as follow:
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro
quiet
initrd /boot/initrd.img-2.6.27.4
and during the *make-kpkg linux-image --initrd --revision=openbsc01.0*, I
saw these lines:
CC [M] drivers/isdn/hardware/mISDN/hfcpci.o
CC [M] drivers/isdn/hardware/mISDN/hfcmulti.o
...
Did I miss something?
Best regards,
Eric
2009/5/13 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
Hi Holger,
I have got an IDE hard desk, not SATA.
I think it's coming from the initrd missing. I don't understand why there
is an error when launching the command:
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4
The error is :
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/sbin/'
I tried to do 'update-initramfs -u -k all' but still have the same
problem:
cp: operand of the target file missing after
`/tmp/tmp.XXXX<something>/sbin/'
The software is using cp for some reason but something is missing and I
don't know what.
I installed mkinitramfs and libbash (needed by mkinitramfs). Did I miss
something?
Best regards,
Eric
2009/5/12 Holger Adams <holger(a)kernreaktor.org>
Hi Eric,
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec(a)jabber.hellercom.de
Eric Cathelinaud wrote:
Hi,
I followed Debian_Getting_Started chapter in the wiki. There wasn't any
error but, after rebooting, the kernel crashed:
Booting 'Debian GNU/Linux, kernel 2.6.27.4'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
[Linux-bzImage, setup=0x3000, size=0x1796901]
[0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
[0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Have you forgotten to add SATA support to the kernel and renaming the
hardisk to sda (fstab)?
Best Regards,
Holger