Hi,
Finally i used yaird instead of mkinitramfs to build the image and it works fine:apt-get install yaird
yaird –v –o /boot/initrd.img-2.6.27.4 2.6.27.4
*if yaird return an error saying /lib/modules/2.6.27.4/modules.pcimap is missing:depmod -a -m -F /boot/System.map-2.6.27.4 2.6.27.4
dpkg --configure -a
Now I can boot on kernel 2.6.27.4
Thanks a lot for the help
I still have a problem with hfcmulti.dslot=1
After reboot it says that it is not recognized and is ignored.
My /boot/grub/menu.lst is as follow:
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro quiet
initrd /boot/initrd.img-2.6.27.4
and during the make-kpkg linux-image --initrd --revision=openbsc01.0, I saw these lines:
CC [M] drivers/isdn/hardware/mISDN/hfcpci.o
CC [M] drivers/isdn/hardware/mISDN/hfcmulti.o
...
Did I miss something?
Best regards,
Eric2009/5/13 Eric Cathelinaud <e.cathelinaud@googlemail.com>
Hi Holger,
I have got an IDE hard desk, not SATA.
I think it's coming from the initrd missing. I don't understand why there is an error when launching the command:The error is :
mkinitramfs-kpkg -o /boot/initrd.img-2.6.27.4 2.6.27.4I tried to do 'update-initramfs -u -k all' but still have the same problem:
cp: operand of the target file missing after `/tmp/tmp.XXXXmDVe5B/sbin/'
cp: operand of the target file missing after `/tmp/tmp.XXXX<something>/sbin/'
The software is using cp for some reason but something is missing and I don't know what.
I installed mkinitramfs and libbash (needed by mkinitramfs). Did I miss something?
Best regards,
Eric2009/5/12 Holger Adams <holger@kernreaktor.org>Hi Eric,
Have you forgotten to add SATA support to the kernel and renaming the
Eric Cathelinaud wrote:
> Hi,
>
> I followed Debian_Getting_Started chapter in the wiki. There wasn't any
> error but, after rebooting, the kernel crashed:
>
> Booting 'Debian GNU/Linux, kernel 2.6.27.4'
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 ro quiet hfcmulti.dslot=1
> [Linux-bzImage, setup=0x3000, size=0x1796901]
>
>
> [0.000000] Unknown boot option 'hfcmulti.dslot=1': ignoring
> [0.796125] Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(0,0)
hardisk to sda (fstab)?
Best Regards,
Holger